[ltp] Ethernet card problem on a i1452, RH 7.1

[Ravi Pratap M]

John,

On Wed, 13 Jun 2001, Jones, John wrote:

> eth0	Link encap:Ethernet HWaddr 00:E0:98:08:E3:14
> 	inet addr:207.159.112.56 Bcast:207.159.112.127  Mask:255.255.255.128
> 	UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
> 	RX packets:1075 errors:0 dropped:0 overruns:0 frame:0
> 	TX packets:67 errors:0 dropped:0 overruns:0 carrier:0
> 	collisions:0 txqueuelen:100
> 	Interrupt:3 Base address:0x300

	Looks fine to me. Looks like you will need to configure a default
gateway to access your proxy. Find out which machine is the gateway
(according to convention, it should be, in your case, 207.159.112.1) and
then do :

	# route add default gw [gateway IP address]

	Hope that helps,

			Ravi


-- 
"If you're smart, you'll be humble. There always is somebody
who hasn't read a book and knows twice as much as you do."

              -- David Duchonvy in Readers' Digest

	Ravi Pratap M         <ravi@che.iitm.ac.in>
                      <http://www.iitm.ac.in/~ravi>



----- The Linux ThinkPad mailing list -----
The linux-thinkpad mailing list home page is at:
http://www.bm-soft.com/~bm/tp_mailing.html