[ltp] T30 and built in modem

[Reinhard Foerster]

On Tue, 04 Feb 2003 02:39:20 -0600, Rob Mayoff wrote:
> +---------- On Feb 4, Reinhard Foerster said:
> > All commands doing anything "real" on the line (ATDT, ATA) fail always
> > with NO DIALTONE or NO CARRIER.
> 
> What is the output of "lspci -v" for your modem?

lspci -vv
00:1f.6 Modem: Intel Corp. 82801CA/CAM AC'97 Modem (rev 02) (prog-if 00 [Generic])
        Subsystem: IBM ThinkPad A/T/X Series
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Interrupt: pin B routed to IRQ 5
        Region 0: I/O ports at 2400 [size=256]
        Region 1: I/O ports at 2000 [size=128]

lspci -nvv
00:1f.6 Class 0703: 8086:2486 (rev 02)
        Subsystem: 1014:051a
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Interrupt: pin B routed to IRQ 5
        Region 0: I/O ports at 2400 [size=256]
        Region 1: I/O ports at 2000 [size=128]

loading slmdm:
slmdm: version 2.7.9_debug Jan 26 2003 16:53:50 (Smart Link Ltd.).
slmdm: country set is 0x42 (GERMANY).
PCI: Found IRQ 5 for device 00:1f.6
PCI: Sharing IRQ 5 with 00:1f.3
PCI: Sharing IRQ 5 with 00:1f.5
PCI: Sharing IRQ 5 with 02:00.1
PCI: Setting latency timer of device 00:1f.6 to 64
This driver is not compatible with the installed modem codec.
Please contact your modem provider for support.

The card is made by Intel (Xircom labeled) with a Lucent/Agere AC97 
modem chipset and Intersil Prism 2.5 chipset for 811.2b.

   Reinhard