[ltp] MWavem Not Working after Intialize

Brandon Philips linux-thinkpad@linux-thinkpad.org
Thu, 27 Mar 2003 19:06:36 -0800


James,
I am trying to use the MWavem with a 600e dual boot with Windows XP, any
ideas?

James McKenzie Wrote:
>Which IBM Thinkpad are you attempting to use the mwavem drivers with?
>
>Brandon Philips wrote:

>I was having some problems with the modem connecting in Linux (works fine
in
>WinXP, was opening port OK and I could hear dial tone in Linux but not
>connecting to ISP) so I used the BIOS intialize to clear out the settings.
>Then I went to back into windows and used a PS2 IMODEM Enable command which
>set the modem up for:
>IRQ 10, 3
>DMA 7
>PORT 02f8
>DSP 130
>
>I then booted my custom 2.4.18 kernel with mwave compiled into the kernel
>and it was complaining that the smapi_query calls were returning 0 for the
>DMA (I think) and the IRQ... I thought that was strange so I went back into
>windows and checked the settings, and everything looked ok.  But I still
>couldn't get it to work in Linux... what am I doing wrong?
>
>-Brandon Philips
>
>
>


--
The linux-thinkpad mailing list home page is at:
http://mailman.linux-thinkpad.org/mailman/listinfo/linux-thinkpad