[ltp] cd-rw: can write but can read or mount
Sun, 23 Nov 2003 18:22:15 +0200
I fixed it, I added the 'sc', 'sc_mod' and 'sc_vendor' modules and
link (in '/dev') the cdrom to scd0.
And now is OK.
> Today iI added the module 'sg.o' in order to use mi cd-writer. I was
> compile it and added it to '/etc/modules' and
> after it writed in the blank cd (with 'xcdroast').
> My problem is that now I can't mount the cdrom. What can be the
> I have a thinkpad R-40 with Debian Woody and kernel 2.4.22. I compiled
> it with a modules of
> ide-scsi and sg. I have the '/etc/lilo.conf' configured with the
> line: ' append="apm=off hdc=ide-scsi hdd=ide-scsi" '
> if I link the '/dev/cdrom' to '/dev/scd0' and try to mount the cdrom I
> > mount: /dev/cdrom is not a valid block device
> If back the original link to '/dev/cdrom' to 'hdc' when I try to mount
> it I receive:
> > mount: wrong fs type, bad option, bad superblock on /dev/cdrom,
> or too many mounted file systems
> (could this be the IDE device where you in fact use
> ide-scsi so that sr0 or sda or so is needed?)
> So, any IDEA ??
Laboratory for Computer Graphics and CAD
Faculty of Mechanical Engineering
Technion - Israel Institute of Technology
Haifa, Israel 32000
e-mail: email@example.com <mailto:firstname.lastname@example.org>