[ltp] T30 owners - Memory bank problems?

James P. K. Gilb linux-thinkpad@linux-thinkpad.org
Mon, 15 Mar 2004 13:46:06 -0800


Sorry for the late response.

I have the same problem with my T30.  I have re-seated both SIMMs, 
swapped sockets, booted with only one in one of the slots.  It won't 
boot with only one SIMM in the other slot, but I don't know if this is a 
"feature" (i.e. you have to have a SIMM in a specific slot).

Basically, it only reports 256 MB RAM even though I have two 256 MB SIMMs.

James Gilb

D. Sen wrote:
> Nope, I removed, replaced, switched the SIMMS...they are attached fairly 
> firmly in the sockets. The IBM support agent suggested the power-supply....
> 
> I dont remember this being a problem with my earlier T21 or TP 600. My 
> usage pattern hasnt changed 
> home-suspend->work-unsuspend->work-suspend->home-unsuspend....
> 
> DS
> 
> 
> Richard Neill wrote:
> 
>> Could the SIMMs be coming loose physically? I know this sounds daft, 
>> but I had to fix a desktop yesterday, took all the RAM out, changed 
>> the hard disk, put the RAM (4 modules) back, and only 3/4 of it was 
>> detected. Re-seating the modules cured the problem, even though I had 
>> inserted them carefully in the first place. Maybe your module is 
>> coming lose through vibration? Laptops do get moved around a lot.
>>
>> Richard
>>
>>
>>
>> D. Sen wrote:
>>
>>> Just wondering if any of the T30 owners using both memory banks on 
>>> their system boards have noticed a problem. This is the third time in 
>>> 1.5 years that one of the memory banks on my system board has stopped 
>>> functioning. The RAMS themselves are fine. I have two sims 512 MBytes 
>>> each. Each time, one of the banks stopped working and the system 
>>> recognized only 1 of the 512 MByte modules. You can only tell there 
>>> is a problem when weird problems start happening and you lose 
>>> data.....typing "free" shows only half the memory available.
>>>
>>> Wondering if its just me or there are others. Once every six 
>>> months....(this is my fourth new system-board) would seem to indicate 
>>> there others out there who have experienced the same problem?
>>>
>>> DS
>>>
>>
>