[ltp] FC3 freaking out esporadically (at hibernation)

Xavier Gonzalez linux-thinkpad@linux-thinkpad.org
Sun, 23 Jan 2005 15:41:42 -0500


------=_Part_2212_11291810.1106512902942
Content-Type: text/plain; charset=US-ASCII
Content-Transfer-Encoding: 7bit
Content-Disposition: inline

I have been having some problems with the sound and video system ever
since I had to roll back from 2.6.10 to 2.6.9 in FC3 in my T42. Aside
from the nuisance this was causing me initially, it did not cause me
enough stress to look into more deeply. However, for the last couple
of days sometimes when I set my laptop into hybernation mode and then
try to use it again (weak up or whatever) it freaks out. First, the
keyboard does not seem to respond properly when trying to input the
password for the lock screen. Then, after restarting it, it will freak
out for a large number of times when bringing up the networking system
and the driverloader. After I few times of having to forcefully
shutdown and restart, it will finally go through.

I looked into the kernel ring buffer (i.e. dmesg), and I was not able
to conclude anything other than what appears to be some latency
problems with my wireless connection (Intel PROWireless 2200BG), and
some ide2 problems.

Eitherway, I am sending an attached text file containing output from
dmesg. If anybody has the time and willingness to find out what's
going on, please let me know if you see anything that might be of use.

Thanks,


-X

------=_Part_2212_11291810.1106512902942
Content-Type: text/plain; name="message.txt"
Content-Transfer-Encoding: quoted-printable
Content-Disposition: attachment; filename="message.txt"

Linux version 2.6.9-1.681_FC3.stk16 (root@wolf.linuxant.com) (gcc version 3=
.4.2 20041017 (Red Hat 3.4.2-6.fc3)) #1 Mon Nov 22 16:44:32 EST 2004
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
 BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved)
 BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000002ff60000 (usable)
 BIOS-e820: 000000002ff60000 - 000000002ff77000 (ACPI data)
 BIOS-e820: 000000002ff77000 - 000000002ff79000 (ACPI NVS)
 BIOS-e820: 000000002ff80000 - 0000000030000000 (reserved)
 BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
767MB LOWMEM available.
zapping low mappings.
On node 0 totalpages: 196448
  DMA zone: 4096 pages, LIFO batch:1
  Normal zone: 192352 pages, LIFO batch:16
  HighMem zone: 0 pages, LIFO batch:1
DMI present.
Built 1 zonelists
Kernel command line: ro root=3DLABEL=3D/ rhgb quiet acpi=3Doff
Initializing CPU#0
CPU 0 irqstacks, hard=3Dc03f4000 soft=3Dc03f0000
PID hash table entries: 4096 (order: 12, 65536 bytes)
Detected 1694.794 MHz processor.
Using tsc for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 774452k/785792k available (2118k kernel code, 10804k reserved, 660k=
 data, 148k init, 0k highmem)
Calibrating delay loop... 3350.52 BogoMIPS (lpj=3D1675264)
Security Scaffold v1.0.0 initialized
SELinux:  Initializing.
SELinux:  Starting in permissive mode
There is already a security framework initialized, register_security failed=
.
selinux_register_security:  Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: afe9f9bf 00000000 00000000 00000000
CPU: After vendor identify, caps:  afe9f9bf 00000000 00000000 00000000
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU: After all inits, caps:        afe9f1bf 00000000 00000000 00000040
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: Intel(R) Pentium(R) M processor 1.70GHz stepping 06
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
checking if image is initramfs... it is
Freeing initrd memory: 387k freed
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfd8d6, last bus=3D8
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040816
ACPI: Interpreter disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
PCI: Transparent bridge - 0000:00:1e.0
PCI: Discovered primary peer bus 09 [IRQ]
PCI: Using IRQ router PIIX/ICH [8086/24cc] at 0000:00:1f.0
PCI: IRQ 0 for device 0000:00:1f.1 doesn't match PIRQ mask - try pci=3Dusep=
irqmask
PCI: Found IRQ 11 for device 0000:00:1f.1
PCI: Sharing IRQ 11 with 0000:00:1d.2
PCI: Sharing IRQ 11 with 0000:02:02.0
IBM machine detected. Enabling interrupts during APM calls.
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
audit: initializing netlink socket (disabled)
audit(1106493370.4294965785:0): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux:  Registering netfilter hooks
Initializing Cryptographic API
ksign: Installing public key data
Loading keyring
- Added public key 9F28925150E1013C
- User ID: Red Hat, Inc. (Kernel Module GPG key)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
vesafb: probe of vesafb0 failed with error -6
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected an Intel 855PM Chipset.
agpgart: Maximum main memory to use for agp memory: 690M
agpgart: AGP aperture is 256M @ 0xd0000000
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled
PCI: Found IRQ 11 for device 0000:00:1f.6
PCI: Sharing IRQ 11 with 0000:00:1f.3
PCI: Sharing IRQ 11 with 0000:00:1f.5
PCI: Sharing IRQ 11 with 0000:02:00.1
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
divert: not allocating divert_blk for non-ethernet device lo
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=3D=
xx
ICH4: IDE controller at PCI slot 0000:00:1f.1
PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
PCI: Found IRQ 11 for device 0000:00:1f.1
PCI: Sharing IRQ 11 with 0000:00:1d.2
PCI: Sharing IRQ 11 with 0000:02:02.0
ICH4: chipset revision 1
ICH4: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0x1860-0x1867, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0x1868-0x186f, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
hda: FUJITSU MHT2040AH, ATA DISK drive
Using cfq io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: UJDA755yDVD/CDRW, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
Probing IDE interface ide2...
ide2: Wait for ready failed before probe !
Probing IDE interface ide3...
ide3: Wait for ready failed before probe !
Probing IDE interface ide4...
ide4: Wait for ready failed before probe !
Probing IDE interface ide5...
ide5: Wait for ready failed before probe !
hda: max request size: 128KiB
hda: 78140160 sectors (40007 MB) w/8192KiB Cache, CHS=3D65535/16/63, UDMA(1=
00)
hda: cache flushes supported
 hda: hda1 hda2 hda3
hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
ide-floppy driver 0.99.newide
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard on isa0060/serio0
Synaptics Touchpad, model: 1
 Firmware: 5.9
 Sensor: 44
 new absolute packet format
 Touchpad has extended capability bits
 -> multifinger detection
 -> palm detection
 -> pass-through port
input: SynPS/2 Synaptics TouchPad on isa0060/serio1
serio: Synaptics pass-through port at isa0060/serio1/input0
input: PS/2 Generic Mouse on synaptics-pt/serio0
md: md driver 0.90.0 MAX_MD_DEVS=3D256, MD_SB_DISKS=3D27
NET: Registered protocol family 2
IP: routing cache hash table of 2048 buckets, 64Kbytes
TCP: Hash tables configured (established 262144 bind 37449)
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
speedstep-centrino: no table support for CPU model "Intel(R) Pentium(R) M p=
rocessor 1.70GHz":=20
speedstep-centrino: try compiling with CONFIG_X86_SPEEDSTEP_CENTRINO_ACPI e=
nabled
Freeing unused kernel memory: 148k freed
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
kjournald starting.  Commit interval 5 seconds
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
SELinux:  Disabled at runtime.
SELinux:  Unregistering netfilter hooks
inserting floppy driver for 2.6.9-1.681_FC3.stk16
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
e1000: Ignoring new-style parameters in presence of obsolete ones
Intel(R) PRO/1000 Network Driver - version 5.3.19-k2-NAPI
Copyright (c) 1999-2004 Intel Corporation.
PCI: Found IRQ 11 for device 0000:02:01.0
PCI: Sharing IRQ 11 with 0000:00:1d.0
PCI: Sharing IRQ 11 with 0000:01:00.0
PCI: Sharing IRQ 11 with 0000:02:00.0
e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
divert: allocating divert_blk for eth0
ip_tables: (C) 2000-2002 Netfilter core team
PCI: Found IRQ 11 for device 0000:00:1f.5
PCI: Sharing IRQ 11 with 0000:00:1f.3
PCI: Sharing IRQ 11 with 0000:00:1f.6
PCI: Sharing IRQ 11 with 0000:02:00.1
PCI: Setting latency timer of device 0000:00:1f.5 to 64
intel8x0_measure_ac97_clock: measured 49438 usecs
intel8x0: clocking to 48000
PCI: Found IRQ 11 for device 0000:00:1f.6
PCI: Sharing IRQ 11 with 0000:00:1f.3
PCI: Sharing IRQ 11 with 0000:00:1f.5
PCI: Sharing IRQ 11 with 0000:02:00.1
PCI: Setting latency timer of device 0000:00:1f.6 to 64
MC'97 1 converters and GPIO not ready (0xff00)
hw_random hardware driver 1.0.0 loaded
PCI: Found IRQ 11 for device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: EHCI Host Controller
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: irq 11, pci mem f08e6000
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
USB Universal Host Controller Interface driver v2.2
PCI: Found IRQ 11 for device 0000:00:1d.0
PCI: Sharing IRQ 11 with 0000:01:00.0
PCI: Sharing IRQ 11 with 0000:02:00.0
PCI: Sharing IRQ 11 with 0000:02:01.0
uhci_hcd 0000:00:1d.0: UHCI Host Controller
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: irq 11, io base 00001800
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
PCI: Found IRQ 11 for device 0000:00:1d.1
uhci_hcd 0000:00:1d.1: UHCI Host Controller
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: irq 11, io base 00001820
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
PCI: Found IRQ 11 for device 0000:00:1d.2
PCI: Sharing IRQ 11 with 0000:00:1f.1
PCI: Sharing IRQ 11 with 0000:02:02.0
uhci_hcd 0000:00:1d.2: UHCI Host Controller
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: irq 11, io base 00001840
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
Linux Kernel Card Services
  options:  [pci] [cardbus] [pm]
PCI: Found IRQ 11 for device 0000:02:00.0
PCI: Sharing IRQ 11 with 0000:00:1d.0
PCI: Sharing IRQ 11 with 0000:01:00.0
PCI: Sharing IRQ 11 with 0000:02:01.0
Yenta: CardBus bridge found at 0000:02:00.0 [1014:0552]
Yenta: Using INTVAL to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:02:00.0, mfunc 0x01d21b22, devctl 0x64
Yenta: ISA IRQ mask 0x06b8, PCI irq 11
Socket status: 30000086
PCI: Found IRQ 11 for device 0000:02:00.1
PCI: Sharing IRQ 11 with 0000:00:1f.3
PCI: Sharing IRQ 11 with 0000:00:1f.5
PCI: Sharing IRQ 11 with 0000:00:1f.6
Yenta: CardBus bridge found at 0000:02:00.1 [1014:0552]
Yenta: Using INTVAL to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:02:00.1, mfunc 0x01d21b22, devctl 0x64
Yenta: ISA IRQ mask 0x06b8, PCI irq 11
Socket status: 30000086
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
NET: Registered protocol family 10
Disabled Privacy Extensions on device c0377c20(lo)
IPv6 over IPv4 tunneling driver
divert: not allocating divert_blk for non-ethernet device sit0
ip_tables: (C) 2000-2002 Netfilter core team
mtrr: no more MTRRs available
mtrr: no more MTRRs available
mtrr: no more MTRRs available
mtrr: no more MTRRs available
mtrr: no more MTRRs available
eth0: no IPv6 routers present
EXT3 FS on hda2, internal journal
device-mapper: 4.1.0-ioctl (2003-12-10) initialised: dm@uk.sistina.com
cdrom: open failed.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 524152k swap on /dev/hda3.  Priority:-1 extents:1
IA-32 Microcode Update Driver: v1.14 <tigran@veritas.com>
microcode: No new microdata for cpu 0
parport0: PC-style at 0x3bc [PCSPP,TRISTATE]
ip_tables: (C) 2000-2002 Netfilter core team
ip_conntrack version 2.1 (6139 buckets, 49112 max) - 356 bytes per conntrac=
k
driverloader: module license 'see LICENSE file; Copyright (c)2003-2004 Linu=
xant inc.' taints kernel.
driverloader: stack=3D16384/76/0 REGPARM
usbcore: registered new driver driverloader
PCI: Found IRQ 11 for device 0000:02:02.0
PCI: Sharing IRQ 11 with 0000:00:1d.2
PCI: Sharing IRQ 11 with 0000:00:1f.1
divert: allocating divert_blk for eth1
eth1: New link status: Disconnected (0002)
eth1: WPA, TKIP, WEP128, WEP64 supported
eth1: Intel(R) PRO/Wireless 2200 LAN Card Driver at 0000:02:02.0 (MAC addre=
ss 00:0E:35:4C:C6:8A) ready
eth1: New link status: Connected (0001)
cs: IO port probe 0x0c00-0x0cff: clean.
cs: IO port probe 0x0100-0x04ff: excluding 0x3b8-0x3df 0x4d0-0x4d7
cs: IO port probe 0x0a00-0x0aff: clean.
i2c /dev entries driver
parport0: PC-style at 0x3bc [PCSPP,TRISTATE]
lp0: using parport0 (polling).
lp0: console ready
eth1: no IPv6 routers present
mtrr: no more MTRRs available
mtrr: no more MTRRs available
mtrr: no more MTRRs available
mtrr: no more MTRRs available
mtrr: no more MTRRs available
eth1: entering sleep mode (state=3D3)
eth1: New link status: Disconnected (0002)
eth1: changed to state D3
PCI: Setting latency timer of device 0000:00:1d.0 to 64
PCI: Setting latency timer of device 0000:00:1d.0 to 64
PCI: Setting latency timer of device 0000:00:1d.1 to 64
PCI: Setting latency timer of device 0000:00:1d.1 to 64
PCI: Setting latency timer of device 0000:00:1d.2 to 64
PCI: Setting latency timer of device 0000:00:1d.2 to 64
PCI: Setting latency timer of device 0000:00:1d.7 to 64
PCI: Found IRQ 11 for device 0000:00:1f.1
PCI: Sharing IRQ 11 with 0000:00:1d.2
PCI: Sharing IRQ 11 with 0000:02:02.0
PCI: Found IRQ 11 for device 0000:00:1f.5
PCI: Sharing IRQ 11 with 0000:00:1f.3
PCI: Sharing IRQ 11 with 0000:00:1f.6
PCI: Sharing IRQ 11 with 0000:02:00.1
PCI: Setting latency timer of device 0000:00:1f.5 to 64
PCI: Found IRQ 11 for device 0000:00:1f.6
PCI: Sharing IRQ 11 with 0000:00:1f.3
PCI: Sharing IRQ 11 with 0000:00:1f.5
PCI: Sharing IRQ 11 with 0000:02:00.1
PCI: Setting latency timer of device 0000:00:1f.6 to 64
PCI: Enabling device 0000:02:01.0 (0000 -> 0003)
PCI: Found IRQ 11 for device 0000:02:01.0
PCI: Sharing IRQ 11 with 0000:00:1d.0
PCI: Sharing IRQ 11 with 0000:01:00.0
PCI: Sharing IRQ 11 with 0000:02:00.0
eth1: waking up
eth1: changed to state D0
hub 1-0:1.0: reactivate --> -22
hub 1-0:1.0: reactivate --> -22
hub 2-0:1.0: reactivate --> -22
hub 3-0:1.0: reactivate --> -22
hub 4-0:1.0: reactivate --> -22
eth1: New link status: Connected (0001)
Disabled Privacy Extensions on device c0377c20(lo)
eth1: no IPv6 routers present

------=_Part_2212_11291810.1106512902942--