[ltp] T43 report

[morpheus]

On Mar 17, 2005 5:26 PM, Jeff Lessem wrote:
>Note:  The 80GB Fujitsu drive is SATA, so I used the Intel ICH SATA
>driver, and the drive is detected as /dev/sda.  The DVD writer is
>/dev/hdc and uses the normal PIIX IDE driver.  Without the SATA driver
>the hard disk is detected as /dev/hda, but runs degraded with no DMA.

Interesting...I have a t42p with 60GB drive.  How can I tell if I am running degraded and should be using the Intel ICH SATA driver? 

hdparm -i gives me the following.  Seems udma5 is enabled...

Model=HTS726060M9AT00, FwRev=MH4OA6DA, SerialNo=MRH453M4H2HZ0B
 Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs }
 RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=4
 BuffType=DualPortCache, BuffSize=7877kB, MaxMultSect=16, MultSect=16
 CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=117210240
 IORDY=on/off, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120}
 PIO modes:  pio0 pio1 pio2 pio3 pio4
 DMA modes:  mdma0 mdma1 mdma2
 UDMA modes: udma0 udma1 udma2 udma3 udma4 *udma5
 AdvancedPM=yes: mode=0x80 (128) WriteCache=enabled
 Drive conforms to: ATA/ATAPI-6 T13 1410D revision 3a:

 * signifies the current active mode

------------------------------------------------------------
This mail was sent with TotalOffice--Secure, encrypted webmail with the look and feel of a desktop client.
http://www.totalinfosecurity.com