[ltp] Modem in R50e

[Pirity Tamas Gabor]

Ha jól hiszem, Didrik Pinte írta az alábbiakat:
> > did@geru-itae:~$ lspci -v
> >  ...
> > 
> > 0000:00:1f.6 Modem: Intel Corporation 82801DB/DBL/DBM
> > (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller (rev 01) (prog-if 00
> > [Generic])
> >         Subsystem: IBM: Unknown device 0525
> >         Flags: bus master, medium devsel, latency 0, IRQ 11
> >         I/O ports at 2400 [size=256]
> >         I/O ports at 2000 [size=128]
> >         Capabilities: <available only to root>
>
...
> geru-itae:/home/did# /etc/init.d/sl-modem-daemon start
> Starting SmartLink Modem driver for: modem:1.
> Creating /dev/modem symlink, pointing to: /dev/ttySL0.


0000:00:1f.6 Modem: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M)
AC'97 Modem Controller (rev 01) (prog-if 00 [Generic])
        Subsystem: IBM: Unknown device 0559
        Flags: bus master, medium devsel, latency 0, IRQ 11
        I/O ports at 2400 [size=256]
        I/O ports at 2000 [size=128]
        Capabilities: [50] Power Management version 2

For me device number 0559 and not 0525, maybe that is why your
modem works and mine not.

# /etc/init.d/sl-modem-daemon restart
Shutting down SmartLink Modem driver normally.
Unloading modem driver from kernel ... ACPI: PCI interrupt for device 0000:00:1f.6 disabled
snd_intel8x0m.
ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
MC'97 1 converters and GPIO not ready (0xff00)
Starting SmartLink Modem driver for: modem:1.
Creating /dev/modem symlink, pointing to: /dev/ttySL0.

That looks very nice, and if i run minicom, modem answers fine ,,ATZ''
like commands. Everything works...except ATD. :((


-- 
PTG
Your love life will be happy and harmonious.
Debian 3.0 -- Linux 2.6.14.3