[ltp] Thinkpad R52

[Takis Diakoumis]

Hi

thanks heaps for that.

could you please by chance post up your kernel .config file or the
config-2.6.xx file from the /boot dir for the kernel you're using for
comparison.

thanks heaps.

Takis

On Fri, 2006-03-24 at 22:32 -0500, L. Mark Stone wrote:
> Quoting Takis Diakoumis <linux@executequery.org>:
> 
> > i was looking at the R52. i read somewhere that the IDE interface is
> > PATA. is that correct? i;ve had some issues ona desktop box with a PATA
> > drive - what module needs to be compiled into the kernel to get dma
> > enabled???
> >
> > if i can solve that... R52 is my next purchase
> 
> Below is the relevant output from dmesg.  I too recall some distros  
> needing help with PATA drives.  But like I said, SuSE 10.0 worked fine  
> right out of the box on this unit.
> -----begin selected dmesg output------
> SCSI subsystem initialized
> libata version 1.12 loaded.
> ahci version 1.01
>      ACPI-0212: *** Warning: Device is not power manageable
> ahci: probe of 0000:00:1f.2 failed with error -12
> ata_piix version 1.04
> PCI: Setting latency timer of device 0000:00:1f.2 to 64
> ata1: SATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0x1810 irq 14
> ata1: dev 0 cfg 49:0f00 82:746b 83:5be9 84:6003 85:f469 86:1849  
> 87:6003 88:203f
> ata1: dev 0 ATA, max UDMA/100, 117210240 sectors:
> ata1(0): applying bridge limits
> ata1: dev 0 configured for UDMA/100
> scsi0 : ata_piix  Vendor: ATA       Model: HTS541060G9AT00   Rev: MB3I
>    Type:   Direct-Access                      ANSI SCSI revision: 05
> SCSI device sda: 117210240 512-byte hdwr sectors (60012 MB)
> SCSI device sda: drive cache: write back
> SCSI device sda: 117210240 512-byte hdwr sectors (60012 MB)
> SCSI device sda: drive cache: write back
>   sda: sda1 sda2 sda3 < sda5 sda6 >
> Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
> ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15
> Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0,  type 0
> 
> 
>