[ltp] Re: Tips on adding bluetooth to a T23?

[Richard Neill]

John Sullivan wrote:

> I used to leave the Zoom card in all the time. Then at some point, it did start
> causing me suspend problems (I believe this was 2.6.17). My solution to this
> was to eject the card but leave it, loosely, in the slot. I use a very
> tight-fitting sleeve/bag, so this worked ok.

Try just running:
   cardctl eject  	#eject in software
   cardctl insert	#insert in software.
rather than removing the card physically.

  > With the Zoom card, the annoying thing about leaving it in all the 
time is that
> it flashes blue constantly, and there's nothing you can do about it. 

Paint, maskingtape, or a soldering iron are your friends :-)


Richard