[ltp] Thinkpad charger plug

Matt Jenny linux-thinkpad@linux-thinkpad.org
Mon, 30 Mar 2015 09:26:22 -0400


--90e6ba61465a9c6f2d0512816d45
Content-Type: text/plain; charset=UTF-8

I did this a while ago, not sure if it is quite what you are asking about
or not. I had a dead 65w charger and a working 90w but the 90w the molded
mesh bit right behind the plug was worn through/exposing internal wires
causing a short. So I spliced the two DC wires together, cutting the 90w
one close to to top as below the short and the 65w right at the base making
a long cable, using a multimeter to make sure I was splicing the right
wires, even they were color coded, but then again I have tons of 20w
thinkpad chargers and not everyone has tons of chargers. If you are talking
about opening up the charger it is sealed the same was as a laptop battery,
glued shut, no screws to open it up, maybe some inside but I have never
opened one. Also, you need to be careful of voltage still built up on
components inside the charger.

On Mon, Mar 30, 2015 at 8:42 AM, Timothy Murphy <gayleard@eircom.net> wrote:

>
> I've 2 Thinkpad T-series chargers with frayed charger wires -
> they both work some of the time but often fail.
> I have other chargers which work fine
> so the fault seems to lie in the connection to the plug
> that goes into the back of the computer.
>
> Is it possible to remove this plug and re-solder the wire to it?
> I tried this but it seemed to be very difficult
> to take off the plastic surround to the plug.
> Or is it possible to buy a new plug and replace the present one?
>
> --
> Timothy Murphy
> gayleard /at/ eircom.net
> School of Mathematics, Trinity College, Dublin
>
> --
> The linux-thinkpad mailing list home page is at:
> http://mailman.linux-thinkpad.org/mailman/listinfo/linux-thinkpad
>

--90e6ba61465a9c6f2d0512816d45
Content-Type: text/html; charset=UTF-8
Content-Transfer-Encoding: quoted-printable

<div dir=3D"ltr">I did this a while ago, not sure if it is quite what you a=
re asking about or not. I had a dead 65w charger and a working 90w but the =
90w the molded mesh bit right behind the plug was worn through/exposing int=
ernal wires causing a short. So I spliced the two DC wires together, cuttin=
g the 90w one close to to top as below the short and the 65w right at the b=
ase making a long cable, using a multimeter to make sure I was splicing the=
 right wires, even they were color coded, but then again I have tons of 20w=
 thinkpad chargers and not everyone has tons of chargers. If you are talkin=
g about opening up the charger it is sealed the same was as a laptop batter=
y, glued shut, no screws to open it up, maybe some inside but I have never =
opened one. Also, you need to be careful of voltage still built up on compo=
nents inside the charger.</div><div class=3D"gmail_extra"><br><div class=3D=
"gmail_quote">On Mon, Mar 30, 2015 at 8:42 AM, Timothy Murphy <span dir=3D"=
ltr">&lt;<a href=3D"mailto:gayleard@eircom.net" target=3D"_blank">gayleard@=
eircom.net</a>&gt;</span> wrote:<br><blockquote class=3D"gmail_quote" style=
=3D"margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><br>
I&#39;ve 2 Thinkpad T-series chargers with frayed charger wires -<br>
they both work some of the time but often fail.<br>
I have other chargers which work fine<br>
so the fault seems to lie in the connection to the plug<br>
that goes into the back of the computer.<br>
<br>
Is it possible to remove this plug and re-solder the wire to it?<br>
I tried this but it seemed to be very difficult<br>
to take off the plastic surround to the plug.<br>
Or is it possible to buy a new plug and replace the present one?<br>
<span class=3D"HOEnZb"><font color=3D"#888888"><br>
--<br>
Timothy Murphy<br>
gayleard /at/ <a href=3D"http://eircom.net" target=3D"_blank">eircom.net</a=
><br>
School of Mathematics, Trinity College, Dublin<br>
<br>
--<br>
The linux-thinkpad mailing list home page is at:<br>
<a href=3D"http://mailman.linux-thinkpad.org/mailman/listinfo/linux-thinkpa=
d" target=3D"_blank">http://mailman.linux-thinkpad.org/mailman/listinfo/lin=
ux-thinkpad</a><br>
</font></span></blockquote></div><br></div>

--90e6ba61465a9c6f2d0512816d45--