A few years back I bought an X1 Carbon Gen3 with Win 10 Pro installed
that I occasionally need for some two-way radio programming. I also use
a USB SSD with Arch on it most of the time and recently decided to
upgrade the 256 GB M.2 SSD with a 2 TB one from Crucial.
A few days ago I used Clonezilla to save the Win10 partitions to another
USB HDD I have with the intention of cloning them to the new drive and
then having partitions for Arch and Debian Sid. The new drive arrived
yesterday and I swapped in the new SSD. As somewhat expected, I was
prompted to enter the UEFI setup but when I do, there is only a blank
screen and not the usual setup. I swapped the original SSD back in and
all is well.
This is the first computer I have with an M.2 NVME SSD and I am curious,
does the UEFI setup firmware reside on it instead of in NVRAM on the
main board? Or did I just not wait long enough for the setup screens to
appear? It even hung when I tried to boot from a USB thumb drive.
I found a Tom's Hardware article where a USB enclosure is used with
Clonezilla to transfer the partitions from the original SSD directly to
the new one (my intention had been to set the new drive to GPT
partitioning and using Clonezilla to restore from the HDD). I have such
an enclosure on order which will be here later in the week and I intend
to try this method to see if there is a difference.
TIA,
- Nate
--
"The optimist proclaims that we live in the best of all
possible worlds. The pessimist fears this is true."
Web: https://www.n0nb.us
Projects: https://github.com/N0NB
GPG fingerprint: 82D6 4F6B 0E67 CD41 F689 BBA6 FB2C 5130 D55A 8819
Someone give me an T480 that have some keys on bottom row (N, M and ; ) that
does not work.
Just tried the simple things, like use compressed air to clean under the
keys...
Two question.
1) keyboard and system in general does not depict visible damages: no crack,
no remains of spilled fluids, ...
How can some keys simply stop working?
2) i think i'll have some trouble to find a spare italian keyboard; there's
some way to buy a generic/USA keyboard and 'adapt' to italian users, apart
putting stickers on keys? I can 'pop' keys and subsitute them?
Thanks.
--
Hi,
I've got a 770X and have visited Bill's page so thanks for enabling me to
get my Xserver working.
I've visited the web pages I could find related to the 770X and setting up
a PCMCIA Token Ring Card but I still haven't been able to get the Token
ring working. I haven't tried recompiling the kernel but I don't really
want to yet, I'd rather get a working system if possible before I cause
more problems :-)
Anyway I am running RedHat 6 with kernel 2.2.5-15 and pcmcia 2.2.5-15
My card is an IBM PCMCIA Turbo 16/4 Token Ring Card
The error I keep getting happens when booting.
Delaying tr0 initialisation. FAILED
::
::
Sarting NFS statd OK
Starting NFS quotas: tr0: Initial interrupt: 16 Mbps, shared RAM base
000d8000
tr0:open failed: ret_code = 34, retrying
tr0:open failed: ret_code = 34, retrying
tr0:open failed: ret_code = 34, retrying
tr0:open failed: ret_code = 34, retrying
tr0:open failed: ret_code = 34, retrying
etc..
I'm not that familiar with hacking around and setting up Linux, I seemed to
have had an easy time of setting it up until now! Mind you this is the
first laptop I've tried to set up.
Any suggestions appreciated,
Thanks,
James