pcmcia problem

[Chad]

Thanks for the reply. Yes, I forgot to check the log, here's what I get
for the process of inserting and removing the card:

localhost kernel: cs: memory probe 0xa0000000-0xa0ffffff: clean.
localhost cardmgr[309]: initializing socket 1
localhost cardmgr[309]: socket 1: Serial or Modem
localhost cardmgr[309]: executing: 'insmod /lib/modules/2.2.5-15/pcmcia/serial_cs.o'
localhost kernel: tty01 at 0x02f8 (irg 3) is a 16550A
localhost cardmgr[309]: executing: './serial start ttyS1'
localhost kernel: tty01 unloaded
localhost cardmgr[309]: shutting down socket 1
localhost cardmgr[309]: executing: './serial stop ttyS1'
localhost cardmgr[309]: executing: 'rmmod serial_cs'

I don't have much experience with pcmcia stuff at all...


Rob Mayoff wrote:
> 
> | To me it sounded like an IRQ conflict, but I don't see why that would
> | have changed in just upgrading to 6... Any thoughts?
> 
> Do any messages of interest appear in /var/log/messages or the output of
> dmesg?

-- 

Chad Cunningham
ccunning@math.ohio-state.edu

This message is imaginary, please rotate your display 90 degrees and try again.