[ltp] RH 6 on a 770z networking problems

[Geert Janssen]

Dear Chris,

Don't know about the Ethernet card; using a NetGear FA410TXC myself.
Probably wrong IRQ; guess the PCMCIA cards usually use IRQ 7 or 9.

You probably have a Crystal Semiconductors PnP Audio System CODEC.
Use the CS4232 module under Linux:

    In /etc/conf.modules I have:

    # Sound Modules
    post-install awe_wave /bin/sfxload /etc/midi/GU11-ROM.SF2
    alias sound cs4232
    pre-install sound insmod sound dmabuf=1
    alias midi opl3
    options opl3 io=0x388
    options cs4232 io=0x530 irq=5 dma=1 dma2=0 mpuio=0x330 mpuirq=9

This still gives an error from ad1848 about IRQ 5 at boottime, but everything
seems to work fine anyway: soxplay works, midi works, x11amp works.

In /lib/modules/2.2.10 I have:

   ad1848.o
   adlib_card.o
   cs4232.o
   opl3.o
   sound.o
   soundcore.o
   uart401.o

In /usr/src/linux/.config I have:

    #
    # Sound
    #
    CONFIG_SOUND=m
    # CONFIG_SOUND_ES1370 is not set
    # CONFIG_SOUND_ES1371 is not set
    # CONFIG_SOUND_SONICVIBES is not set
    # CONFIG_SOUND_MSNDCLAS is not set
    # CONFIG_SOUND_MSNDPIN is not set
    CONFIG_SOUND_OSS=m
    # CONFIG_SOUND_PAS is not set
    # CONFIG_SOUND_SB is not set
    CONFIG_SOUND_ADLIB=m
    # CONFIG_SOUND_GUS is not set
    # CONFIG_SOUND_MPU401 is not set
    # CONFIG_SOUND_PSS is not set
    # CONFIG_SOUND_MSS is not set
    # CONFIG_SOUND_SSCAPE is not set
    # CONFIG_SOUND_TRIX is not set
    # CONFIG_SOUND_MAD16 is not set
    # CONFIG_SOUND_WAVEFRONT is not set
    CONFIG_SOUND_CS4232=m
    # CONFIG_SOUND_OPL3SA2 is not set
    # CONFIG_SOUND_MAUI is not set
    # CONFIG_SOUND_SGALAXY is not set
    # CONFIG_SOUND_AD1816 is not set
    # CONFIG_SOUND_OPL3SA1 is not set
    # CONFIG_SOUND_SOFTOSS is not set
    CONFIG_SOUND_YM3812=m
    # CONFIG_SOUND_VMIDI is not set
    # CONFIG_SOUND_UART6850 is not set

    #
    # Additional low level sound drivers
    #
    # CONFIG_LOWLEVEL_SOUND is not set

Good luck,

Geert Janssen