[ltp] A completely-compat PCMCIA NIC/modem

[George Staikos]

-----BEGIN PGP SIGNED MESSAGE-----

On Tue, 07 Mar 2000, David Booss wrote:
> I need to know what PCMCIA NIC/modem combo card works well with
> SlackWare on an i1560 (and has a tutorial or How-To for configuring it,
> or else really good directions somewhere). I currently have the 10/100
> EtherJet CardBus, but I'm sick of it not working (and I HAVE tried for
> _hours_ to get it to work). I need to know this as soon as possible,
> because I am taking my laptop to California on Thursday and I need to
> dial out with it. Any help would be appreciated VERY VERY much.
> 

  There are many cards that work.  if you want a 10bT card the 3C589 is what
I use and it works quite nicely.  I think you can't go wrong with 3COM PCMCIA
nics though.  You should consult the PCMCIA-CS homepage at
http://pcmcia.sourceforge.org/

   I have tried a Dayna 10bT card and it works well too (it's NE2000
compatible though.  not really a well designed NIC)

- -- 

George Staikos 


-----BEGIN PGP SIGNATURE-----
Version: PGP 6.5.2

iQEVAwUBOMXR0PaardfOEhQRAQERNwf/R2h/A2tPgmHliwL7NjDHuBDIQh+6PhR6
NsWRi9xgWWZMUUCxM7BZcBuSyX35YnM3DOE77oxS+puH/jqmyRFAPeRud9l+LxSl
tmrFllglIcf5H+2S5DlxiwKOG2wR1qIYMYopvWTKkV+vCab5JCcnM+BfQQWZ72FN
l5o4aaNSGGN9dridCX4FZPjyBdMHmxrSeLecL6xqhJCvo2/JXs1nyMECwcnmrSEQ
+Un7D5s7zySRCFgg6UxzECo/g/cmIsEVE7FSDl24g5zTd4Hqm7CrWMrWOHq1Unmv
vvo9KdKH2yUdcF0EKLA5kReiBcyFvB4iDwxhYKfwTSyVqAQR9peQHg==
=6C3X
-----END PGP SIGNATURE-----
----- The Linux ThinkPad mailing list -----
The linux-thinkpad mailing list home page is at:
http://www.bm-soft.com/~bm/tp_mailing.html