[ltp] problems getting X running on a i1200
Frank Winter
linux-thinkpad@www.bm-soft.com
Thu, 12 Apr 2001 17:08:08 +0200 (MEST)
Hi everyone,
I am going to despair with my the X Server and with a girl too but
ok thats off topic here. This X thing does not want to run.
I am using a i1200 with RH7.0 as the base system. I installed
kernel 2.4.3 and XFree86 4.0.2 and the update to 4.0.3.
After running #startx I always get a line in /var/log/XFree.log
"no screens found".
I tried several HorizSync and VertRefresh but it is everytime the
same result: A blank black screen. And after the reboot the log
contains always the same.
(Sorry for that long mail, but I am really out of ideas.)
Here is the /var/log/XFree.log and after that the XFree86config:
XFree86 Version 4.0.3 / X Window System
(protocol Version 11, revision 0, vendor release 6400)
Release Date: 16 March 2001
If the server is older than 6-12 months, or if your card is
newer than the above date, look for a newer version before
reporting problems. (See http://www.XFree86.Org/FAQ)
Operating System: Linux 2.2.18pre11-va1.1 i686 [ELF]
Module Loader present
(==) Log file: "/var/log/XFree86.0.log", Time: Thu Apr 12 10:04:40 2001
(==) Using config file: "/etc/X11/XF86Config"
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (??) unknown.
(==) ServerLayout "Simple Layout"
(**) |-->Screen "Screen 1" (0)
(**) | |-->Monitor "My Monitor"
(**) | |-->Device "Silicon Motion Lynx family"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xfree86"
(**) XKB: rules: "xfree86"
(**) Option "XkbModel" "pc101"
(**) XKB: model: "pc101"
(**) Option "XkbLayout" "de"
(**) XKB: layout: "de"
(**) FontPath set to
"/usr/X11R6/lib/X11/fonts/local/,/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/75dpi/"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(--) using VT number 7
(WW) Cannot open APM
(II) Module ABI versions:
XFree86 ANSI C Emulation: 0.1
XFree86 Video Driver: 0.3
XFree86 XInput driver : 0.1
XFree86 Server Extension : 0.1
XFree86 Font Renderer : 0.2
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
compiled for 4.0.2, module version = 1.0.0
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.2
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
compiled for 4.0.2, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.3
(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x8000003c, mode1Res1 = 0x80000000
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,7194 card 1014,01ab rev 01 class 06,00,00 hdr
80
(II) PCI: 00:00:1: chip 8086,7195 card 1014,01a1 rev 00 class 04,01,00 hdr
00
(II) PCI: 00:00:2: chip 8086,7196 card 1014,01a2 rev 00 class 07,03,00 hdr
00
(II) PCI: 00:02:0: chip 126f,0712 card 1014,01a4 rev a0 class 03,00,00 hdr
00
(II) PCI: 00:03:0: chip 1217,6872 card 0001,0000 rev 05 class 06,07,00 hdr
02
(II) PCI: 00:07:0: chip 8086,7198 card 0000,0000 rev 01 class 06,01,00 hdr
80
(II) PCI: 00:07:1: chip 8086,7199 card 0000,0000 rev 00 class 01,01,80 hdr
00
(II) PCI: 00:07:2: chip 8086,719a card 0000,0000 rev 00 class 0c,03,00 hdr
00
(II) PCI: 00:07:3: chip 8086,719b card 0000,0000 rev 00 class 06,80,00 hdr
00
(II) PCI: End of PCI scan
(II) LoadModule: "scanpci"
(II) Loading /usr/X11R6/lib/modules/libscanpci.a
(II) Module scanpci: vendor="The XFree86 Project"
compiled for 4.0.2, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.3
(II) UnloadModule: "scanpci"
(II) Unloading /usr/X11R6/lib/modules/libscanpci.a
(II) Host-to-PCI bridge:
(II) PCI-to-ISA bridge:
(II) Bus 0: bridge is at (0:0:0), (-1,0,0), BCTRL: 0x00 (VGA_EN is cleared)
(II) Bus 0 I/O range:
[0] -1 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus -1: bridge is at (0:7:0), (0,-1,0), BCTRL: 0x00 (VGA_EN is cleared)
(II) Bus -1 I/O range:
(II) Bus -1 non-prefetchable memory range:
(II) Bus -1 prefetchable memory range:
(--) PCI:*(0:2:0) Silicon Motion Inc. LynxEM+ rev 160, Mem @ 0x06000000/24
(II) Addressable bus resource ranges are
[0] -1 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0x00000000 - 0x000001ff (0x200) IX[B]E
(II) Active PCI resource ranges:
[0] -1 0x06000000 - 0x06ffffff (0x1000000) MX[B](B)
[1] -1 0x00008000 - 0x0000801f (0x20) IX[B]
[2] -1 0x00008040 - 0x0000804f (0x10) IX[B]
[3] -1 0x00007c00 - 0x00007c7f (0x80) IX[B]
[4] -1 0x00007800 - 0x000078ff (0x100) IX[B]
[5] -1 0x00007400 - 0x0000743f (0x40) IX[B]
[6] -1 0x00007000 - 0x000070ff (0x100) IX[B]
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0x06000000 - 0x06ffffff (0x1000000) MX[B](B)
[1] -1 0x00008000 - 0x0000801f (0x20) IX[B]
[2] -1 0x00008040 - 0x0000804f (0x10) IX[B]
[3] -1 0x00007c00 - 0x00007c7f (0x80) IX[B]
[4] -1 0x00007800 - 0x000078ff (0x100) IX[B]
[5] -1 0x00007400 - 0x0000743f (0x40) IX[B]
[6] -1 0x00007000 - 0x000070ff (0x100) IX[B]
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x05ffffff (0x5f00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0x00000000 - 0x000001ff (0x200) IX[B]E
(II) All system resource ranges:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x05ffffff (0x5f00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0x06000000 - 0x06ffffff (0x1000000) MX[B](B)
[6] -1 0x00000000 - 0x000001ff (0x200) IX[B]E
[7] -1 0x00008000 - 0x0000801f (0x20) IX[B]
[8] -1 0x00008040 - 0x0000804f (0x10) IX[B]
[9] -1 0x00007c00 - 0x00007c7f (0x80) IX[B]
[10] -1 0x00007800 - 0x000078ff (0x100) IX[B]
[11] -1 0x00007400 - 0x0000743f (0x40) IX[B]
[12] -1 0x00007000 - 0x000070ff (0x100) IX[B]
(II) LoadModule: "siliconmotion"
(II) Loading /usr/X11R6/lib/modules/drivers/siliconmotion_drv.o
(II) Module siliconmotion: vendor="The XFree86 Project"
compiled for 4.0.2, module version = 1.2.0
Module class: XFree86 Video Driver
ABI class: XFree86 Video Driver, version 0.3
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
compiled for 4.0.3, module version = 1.0.0
Module class: XFree86 XInput Driver
ABI class: XFree86 XInput driver, version 0.1
(II) Silicon Motion: driver (version 1.2.0) for Silicon Motion Lynx
chipsets:
Lynx, LynxE, Lynx3D, LynxEM, LynxEM+, Lynx3DM
(II) Primary Device is: PCI 00:02:0
(--) Chipset LynxEM+ found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x05ffffff (0x5f00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0x06000000 - 0x06ffffff (0x1000000) MX[B](B)
[6] -1 0x00000000 - 0x000001ff (0x200) IX[B]E
[7] -1 0x00008000 - 0x0000801f (0x20) IX[B]
[8] -1 0x00008040 - 0x0000804f (0x10) IX[B]
[9] -1 0x00007c00 - 0x00007c7f (0x80) IX[B]
[10] -1 0x00007800 - 0x000078ff (0x100) IX[B]
[11] -1 0x00007400 - 0x0000743f (0x40) IX[B]
[12] -1 0x00007000 - 0x000070ff (0x100) IX[B]
(II) resource ranges after probing:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x05ffffff (0x5f00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0x06000000 - 0x06ffffff (0x1000000) MX[B](B)
[6] 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[7] 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[8] 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[9] -1 0x00000000 - 0x000001ff (0x200) IX[B]E
[10] -1 0x00008000 - 0x0000801f (0x20) IX[B]
[11] -1 0x00008040 - 0x0000804f (0x10) IX[B]
[12] -1 0x00007c00 - 0x00007c7f (0x80) IX[B]
[13] -1 0x00007800 - 0x000078ff (0x100) IX[B]
[14] -1 0x00007400 - 0x0000743f (0x40) IX[B]
[15] -1 0x00007000 - 0x000070ff (0x100) IX[B]
[16] 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[17] 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="The XFree86 Project"
compiled for 4.0.3, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.3
(**) Silicon Motion(0): Depth 24, (--) framebuffer bpp 24
(==) Silicon Motion(0): RGB weight 888
(==) Silicon Motion(0): Default visual is TrueColor
(**) Silicon Motion(0): Option "NoAccel"
(**) Silicon Motion(0): Option: NoAccel - Acceleration disabled
(==) Silicon Motion(0): Using Hardware Cursor
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/X11R6/lib/modules/linux/libint10.a
(II) Module int10: vendor="The XFree86 Project"
compiled for 4.0.2, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.3
(II) Silicon Motion(0): Primary V_BIOS segment is: 0xc000
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/X11R6/lib/modules/libvbe.a
(II) Module vbe: vendor="The XFree86 Project"
compiled for 4.0.2, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.3
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/X11R6/lib/modules/linux/libint10.a
(II) Silicon Motion(0): initializing int10
(II) Silicon Motion(0): Primary V_BIOS segment is: 0xc000
(II) Silicon Motion(0): VESA BIOS detected
(II) Silicon Motion(0): VESA VBE Version 2.0
(II) Silicon Motion(0): VESA VBE Total Mem: 4096 kB
(II) Silicon Motion(0): VESA VBE OEM: Silicon Motion SM712 VGA BIOS
(II) Silicon Motion(0): VESA VBE OEM Software Rev: 2.0
(II) Silicon Motion(0): VESA VBE OEM Vendor: SM712
(II) Silicon Motion(0): VESA VBE OEM Product: SM712
(II) Silicon Motion(0): VESA VBE OEM Product Rev: SM712
(--) Silicon Motion(0): Chipset: "LynxEM+"
(WW) System lacks support for changing MTRRs
(II) Silicon Motion(0): Physical MMIO at 0x06400000
(II) Silicon Motion(0): Logical MMIO at 0x40308000 - 0x40707FFF
(II) Silicon Motion(0): DPR=0x40310000, VPR=0x40314000, IOBase=0x40608000
(II) Silicon Motion(0): DataPort=0x40308000 - 0x4030FFFF
(II) Silicon Motion(0): Physical frame buffer at 0x06000000
(II) Silicon Motion(0): Logical frame buffer at 0x00000000 - 0xFFFFFFFF
(II) Silicon Motion(0): Cursor Offset: FFFFFC00 Reserved: FFFFF800
(II) Silicon Motion(0): TFT Panel Size = 1024x768
SMI_PreInit vgaCRIndex=3d4, vgaIOBase=3d0, MMIOBase=40308000
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Loading /usr/X11R6/lib/modules/libi2c.a
(II) Module i2c: vendor="The XFree86 Project"
compiled for 4.0.2, module version = 1.2.0
ABI class: XFree86 Video Driver, version 0.3
(II) Silicon Motion(0): I2C bus "I2C bus" initialized.
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="The XFree86 Project"
compiled for 4.0.2, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.3
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Reloading /usr/X11R6/lib/modules/libddc.a
(II) Silicon Motion(0): VESA VBE DDC supported
(II) Silicon Motion(0): VESA VBE DDC Level none
(II) Silicon Motion(0): VESA VBE DDC transfer in appr. 0 sec.
(II) Silicon Motion(0): VESA VBE DDC read successfully
(==) Silicon Motion(0): Using gamma correction (1.0, 1.0, 1.0)
(--) Silicon Motion(0): videoram: 4096kB
SMI_PreInit minClock=20000, maxClock=135000
(--) Silicon Motion(0): Detected current MCLK value of 85.909 MHz
(II) Silicon Motion(0): My Monitor: Using hsync value of 25.20 kHz
(II) Silicon Motion(0): My Monitor: Using vrefresh value of 48.00 Hz
(II) Silicon Motion(0): Clock range: 20.00 to 135.00 MHz
(II) Silicon Motion(0): Mode: 1024x768 24-bpp, 0.000000Hz
(WW) Silicon Motion(0): Mode "1024x768" deleted (hsync out of range)
(II) Silicon Motion(0): Mode: 640x350 24-bpp, 0.000000Hz
(WW) Silicon Motion(0): Default mode "640x350" deleted (exceeds panel
dimensions)
(II) Silicon Motion(0): Mode: 640x400 24-bpp, 0.000000Hz
(WW) Silicon Motion(0): Default mode "640x400" deleted (exceeds panel
dimensions)
(II) Silicon Motion(0): Mode: 720x400 24-bpp, 0.000000Hz
(WW) Silicon Motion(0): Default mode "720x400" deleted (exceeds panel
dimensions)
(II) Silicon Motion(0): Mode: 640x480 24-bpp, 0.000000Hz
(WW) Silicon Motion(0): Default mode "640x480" deleted (exceeds panel
dimensions)
(II) Silicon Motion(0): Mode: 640x480 24-bpp, 0.000000Hz
(WW) Silicon Motion(0): Default mode "640x480" deleted (exceeds panel
dimensions)
(II) Silicon Motion(0): Mode: 640x480 24-bpp, 0.000000Hz
(WW) Silicon Motion(0): Default mode "640x480" deleted (exceeds panel
dimensions)
(II) Silicon Motion(0): Mode: 640x480 24-bpp, 0.000000Hz
(WW) Silicon Motion(0): Default mode "640x480" deleted (exceeds panel
dimensions)
(II) Silicon Motion(0): Mode: 800x600 24-bpp, 0.000000Hz
(WW) Silicon Motion(0): Default mode "800x600" deleted (exceeds panel
dimensions)
(II) Silicon Motion(0): Mode: 800x600 24-bpp, 0.000000Hz
(WW) Silicon Motion(0): Default mode "800x600" deleted (exceeds panel
dimensions)
(II) Silicon Motion(0): Mode: 800x600 24-bpp, 0.000000Hz
(WW) Silicon Motion(0): Default mode "800x600" deleted (exceeds panel
dimensions)
(II) Silicon Motion(0): Mode: 800x600 24-bpp, 0.000000Hz
(WW) Silicon Motion(0): Default mode "800x600" deleted (exceeds panel
dimensions)
(II) Silicon Motion(0): Mode: 800x600 24-bpp, 0.000000Hz
(WW) Silicon Motion(0): Default mode "800x600" deleted (exceeds panel
dimensions)
(WW) Silicon Motion(0): Default mode "1152x864" deleted (width too large for
virtual size)
(WW) Silicon Motion(0): Default mode "1280x960" deleted (width too large for
virtual size)
(WW) Silicon Motion(0): Default mode "1280x960" deleted (width too large for
virtual size)
(WW) Silicon Motion(0): Default mode "1280x1024" deleted (width too large
for virtual size)
(WW) Silicon Motion(0): Default mode "1280x1024" deleted (width too large
for virtual size)
(WW) Silicon Motion(0): Default mode "1280x1024" deleted (width too large
for virtual size)
(WW) Silicon Motion(0): Default mode "1600x1200" deleted (insufficient
memory for mode)
(WW) Silicon Motion(0): Default mode "1600x1200" deleted (insufficient
memory for mode)
(WW) Silicon Motion(0): Default mode "1600x1200" deleted (insufficient
memory for mode)
(WW) Silicon Motion(0): Default mode "1600x1200" deleted (insufficient
memory for mode)
(WW) Silicon Motion(0): Default mode "1600x1200" deleted (insufficient
memory for mode)
(WW) Silicon Motion(0): Default mode "1792x1344" deleted (insufficient
memory for mode)
(WW) Silicon Motion(0): Default mode "1792x1344" deleted (insufficient
memory for mode)
(WW) Silicon Motion(0): Default mode "1856x1392" deleted (insufficient
memory for mode)
(WW) Silicon Motion(0): Default mode "1856x1392" deleted (insufficient
memory for mode)
(WW) Silicon Motion(0): Default mode "1920x1440" deleted (insufficient
memory for mode)
(WW) Silicon Motion(0): Default mode "1920x1440" deleted (insufficient
memory for mode)
(WW) Silicon Motion(0): Mode pool is empty
(EE) Silicon Motion(0): No valid modes found
(II) UnloadModule: "siliconmotion"
(II) UnloadModule: "ddc"
(II) UnloadModule: "ddc"
(II) Unloading /usr/X11R6/lib/modules/libddc.a
(II) UnloadModule: "i2c"
(II) Unloading /usr/X11R6/lib/modules/libi2c.a
(II) UnloadModule: "int10"
(II) UnloadModule: "vbe"
(II) Unloading /usr/X11R6/lib/modules/libvbe.a
(II) UnloadModule: "int10"
(II) Unloading /usr/X11R6/lib/modules/linux/libint10.a
(II) UnloadModule: "vgahw"
(II) Unloading /usr/X11R6/lib/modules/libvgahw.a
(EE) Screen(s) found, but none have a usable configuration.
Fatal server error:
no screens found
############################################################
XFree86config:
Section "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"
FontPath "/usr/X11R6/lib/X11/fonts/local/"
FontPath "/usr/X11R6/lib/X11/fonts/misc/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
EndSection
Section "ServerFlags"
EndSection
Section "InputDevice"
Identifier "Keyboard1"
Driver "Keyboard"
Option "AutoRepeat" "500 30"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc101"
Option "XkbLayout" "de"
EndSection
Section "InputDevice"
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "PS/2"
Option "Device" "/dev/mouse"
EndSection
Section "Monitor"
Identifier "My Monitor"
HorizSync 25.2 # I tried this with 32.5 and
VertRefresh 48 # 60 too
ModeLine "1024x768" 48.00 1024 1104 1208 1348 768 778 782 888
EndSection
Section "Device"
Identifier "Silicon Motion Lynx family"
Driver "siliconmotion"
Option "NoAccel"
#Chipset "LynxEM+"
BusID "PCI:0:2:0"
VideoRam 4096
# Insert Clocks lines here if appropriate
EndSection
Section "Screen"
Identifier "Screen 1"
Device "Silicon Motion Lynx family"
Monitor "My Monitor"
DefaultDepth 24
DefaultColorDepth 24
Subsection "Display"
Depth 24
Modes "1024x768"
ViewPort 0 0
Virtual 1024 768
EndSubsection
EndSection
Section "ServerLayout"
Identifier "Simple Layout"
Screen "Screen 1"
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
--
Sent through GMX FreeMail - http://www.gmx.net
----- The Linux ThinkPad mailing list -----
The linux-thinkpad mailing list home page is at:
http://www.bm-soft.com/~bm/tp_mailing.html