[ltp] Can't hibernate (SMAPI BIOS error)
Dr. Edmund Weitz
linux-thinkpad@www.bm-soft.com
25 Aug 2001 20:41:11 +0200
Shigeo Tanai <xc6s-tni@asahi-net.or.jp> writes:
> Have you tried to making FAT partition under 1024 cylinder range?
> You could shrink your NTFS partition so to make a room before it,
> and create new FAT partition for the hibernation file.
No, I haven't tried this yet because Vivek reported success although
his FAT 16 partition was also at the end of the hard disk like mine.
> BTW, what is your 'hdparm -v -i /dev/hda' output?
Here it is:
root@bird:/home/edi > hdparm -v -i /dev/hda
/dev/hda:
multcount = 16 (on)
I/O support = 0 (default 16-bit)
unmaskirq = 0 (off)
using_dma = 1 (on)
keepsettings = 0 (off)
nowerr = 0 (off)
readonly = 0 (off)
readahead = 8 (on)
geometry = 4134/240/63, sectors = 62506080, start = 0
Model=IBM-DJSA-232, FwRev=JS8IAD1A, SerialNo=48YBWLB2117
Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs }
RawCHS=16383/15/63, TrkSize=0, SectSize=0, ECCbytes=4
BuffType=DualPortCache, BuffSize=1874kB, MaxMultSect=16, MultSect=16
CurCHS=16383/15/63, CurSects=15481935, LBA=yes, LBAsects=62506080
IORDY=on/off, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2 udma0 udma1 *udma2 udma3 udma4
Drive Supports : Reserved : ATA-2 ATA-3 ATA-4 ATA-5
Kernel Drive Geometry LogicalCHS=4134/240/63 PhysicalCHS=66144/15/63
Thanks,
Edi.
----- The Linux ThinkPad mailing list -----
The linux-thinkpad mailing list home page is at:
http://www.bm-soft.com/~bm/tp_mailing.html