[ltp] 600E sound problem (CS4232)

[Jean-Philippe Jung (Home)]

Hi,

I have same symptoms with a 380Z (supposed to have a CS4236B card), module
refuses to load, same error message. All is fine under Windows 98. Redhat
7.1.
If someone has an idea...

Regards,

Jean-Philippe

----- Original Message -----
From: "Aleksandar B. Samardzic" <a.samardzic@matf.bg.ac.yu>
To: <linux-thinkpad@bm-soft.com>
Sent: Friday, December 14, 2001 5:13 PM
Subject: [ltp] 600E sound problem (CS4232)


> I have Thinkpad 600E (with CS4232 sound card) dual booting between RedHat
> Linux 7.2 and Windows 2000 Professional. Sound worked fine under Linux
using
> following settings to cs4232 kernel module:
>   io = 0x530
>   irq = 5
>   dma = 1
>   dma2 = 0
>   mpuio = 0x330
>   mpuirq = 9
>
> Today I've upgraded Windows 2000 to Windows XP, that in turn messed up
some of
> my hardware settings, actually settings for Mwave modem and above sound
> card. So I had to change back some settings using Windows XP device
manager -
> I'm pretty sure that settings are now reverted back to their original
> values. Modem is now again working fine under Linux but sound card is
> not. When I try to load cs4232 module using command:
>   /sbin/modprobe cs4232 io=0x530 irq=5 dma=1 dma2=0 mpuio=0x330 mpuirq=9
> following is reported:
> /lib/modules/2.4.16/kernel/drivers/sound/cs4232.o: init_module: No such
device
> Hint: insmod errors can be caused by incorrect module parameters,
including invalid IO or IRQ parameters
> /lib/modules/2.4.16/kernel/drivers/sound/cs4232.o: insmod
/lib/modules/2.4.16/kernel/drivers/sound/cs4232.o failed
> /lib/modules/2.4.16/kernel/drivers/sound/cs4232.o: insmod cs4232 failed
>
> I've tried also various irq, io and dma combinations with and without
changing
> settings under Windows XP (also, besides through Windows XP device
manager,
> I've tried to change settings through Thinkpad control application
PS2.EXE),
> but without any success.  I've tried also to setup audio under Linux using
> sndconfig (to load sound modules I was simply executing above modprobe
command
> along with several alike to load sound, uart401 and ad1848 modules in my
init
> scripts and wasn't using modules.conf file, so I thought this may be right
> time to have sndconfig to configure modules.conf properly for me), however
> after launching snconfig (with --noprobe argument) and selecting "Crystal
> CS423x sound chip" entry from list, when test sample should be played, an
> error ("modprobe: Can't locate module sound-slot-0") is reported.
>
> Now I'm running out of ideas what to try next. Any help here.
>
> Thanks.
>
>
> ----- The Linux ThinkPad mailing list -----
> The linux-thinkpad mailing list home page is at:
> http://www.bm-soft.com/~bm/tp_mailing.html
>


----- The Linux ThinkPad mailing list -----
The linux-thinkpad mailing list home page is at:
http://www.bm-soft.com/~bm/tp_mailing.html