[ltp] Re: Hard drive messages on syslog

[D. Sen]

Hi Immanuel,

Just confirming....did you set "CONFIG_IDEDISK_MULTI_MODE" to "y" or to "n" in the
kernel options (to get rid of the status errors)?

Regards,
DS

Immanuel Derks wrote:

> DS,
>
> That is confirmed; I got rid of the status errors on my TP21/32G drive
> setting multimode off in the 2.4.1 kernel options.
>
> Regards
> Immanuel Derks
>
> "D. Sen" wrote:
> >
> > Actually,  I have ide0=autotune as a boot parameter.and that enables the DMA.
> > These drives and ide chipsets should be capable of DMA / UDMA.
> >
> > Browsing through the linux-kernel mailing list, I am almost convinced its a
> > "multimode" problem. The 2.4.1 kernel has a "enable multimode by default
> > option"  but they refer to a status error of 0x51 (not 0x50 that I am
> > seeing.....)
> >
> > DS
> >
> > Tom Allison wrote:
> >
> > > I think the problem is with your hdparm settings.
> > > >From the output - you have DMA enabled, which makes things mad.  The OS
> > > then disabled your DMA settings.
> > >
> > > This is my guess, since I saw the same problems before on my A21.  When you
> > > run hdparm, don't set the DMA = ON.
> > >
> > > Then watch your syslog files.  You should get a 1:1 correllation between
> > > the DMA settings and your errors.
> > >
> > > D. Sen writes:
> > >
> > > > Does anyone know whats causing this? Is it a faulty drive? The drive is
> > > > only a couple of weeks old.....so I am suspecting its something else.
> > > >
> > > > kernel: hda: status error: status=0x50 { DriveReady SeekComplete }
> > > > kernel: hda: no DRQ after issuing WRITE
> > > > kernel: hda: status error: status=0x50 { DriveReady SeekComplete }
> > > > kernel: hda: no DRQ after issuing WRITE
> > > > kernel: hda: lost interrupt
> > > > kernel: hda: status error: status=0x50 { DriveReady SeekComplete }
> > > > kernel: hda: no DRQ after issuing WRITE
> > > > kernel: hda: status error: status=0x50 { DriveReady SeekComplete }
> > > > kernel: hda: no DRQ after issuing WRITE
> > > > kernel: hda: DMA disabled
> > > > kernel: ide0: reset: success
> > > >
> > > > Its a 32 G drive on a TP 21. I see the messages on kernels 2.2.17,
> > > > 2.2.18 and 2.4.1
> > > >
> > > > --
> > > > D. Sen, Room E167
> > > > AT&T Labs-Research
> > > > Shannon Laboratory
> > > > 180 Park Ave.
> > > > Florham Park NJ 07932-0971
> > > > Ph: 973-360-8546
> > > > http://www.research.att.com/~dsen
> > > >
> > > >
> > > >
> > > > ----- The Linux ThinkPad mailing list -----
> > > > The linux-thinkpad mailing list home page is at:
> > > > http://www.bm-soft.com/~bm/tp_mailing.html
> > >
> > > ----- The Linux ThinkPad mailing list -----
> > > The linux-thinkpad mailing list home page is at:
> > > http://www.bm-soft.com/~bm/tp_mailing.html
> >
> > --
> > D. Sen, Room E167
> > AT&T Labs-Research
> > Shannon Laboratory
> > 180 Park Ave.
> > Florham Park NJ 07932-0971
> > Ph: 973-360-8546
> > http://www.research.att.com/~dsen
> >
> > ----- The Linux ThinkPad mailing list -----
> > The linux-thinkpad mailing list home page is at:
> > http://www.bm-soft.com/~bm/tp_mailing.html
>
> ----- The Linux ThinkPad mailing list -----
> The linux-thinkpad mailing list home page is at:
> http://www.bm-soft.com/~bm/tp_mailing.html

--
D. Sen, Room E167
AT&T Labs-Research
Shannon Laboratory
180 Park Ave.
Florham Park NJ 07932-0971
Ph: 973-360-8546
http://www.research.att.com/~dsen



----- The Linux ThinkPad mailing list -----
The linux-thinkpad mailing list home page is at:
http://www.bm-soft.com/~bm/tp_mailing.html