[ltp] APMD and Standby on the TP-T21

[Markus Alt]

"D. Sen" wrote:
> 
> This would be fine......except that Fn+F3 causes a "hda: lost interrupt"
> message on the syslog.
> 
> (I too use it at work with the lid closed......and use apm -s before I
> remove
> it from the port replicator). But at home, I sometimes would like the
> standby
> option.....where I dont have to disable the network....and stop my
> rsh/telnet
> connections. And whether its by closing the lid or Fn+F3, I dont have that
> option (unless I ignore syslog errors).

Hmm, this is really strange. Right now, I use my machine in the office,
docked in the port replicator with an IBM Token Ring PCMCIA card and
active network connection. Closing the lid (and working with external
screen/mouse/keyboard) or pressing <Fn><F3> works without problems, i.e.
I see no such messages.

FWIW, here are my HD's settings (output of "hdparm -vi /dev/hda"):

/dev/hda:
 multcount    = 16 (on)
 I/O support  =  0 (default 16-bit)
 unmaskirq    =  0 (off)
 using_dma    =  1 (on)
 keepsettings =  1 (on)
 nowerr       =  0 (off)
 readonly     =  0 (off)
 readahead    =  8 (on)
 geometry     = 4134/240/63, sectors = 62506080, start = 0

 Model=IBM-DJSA-232, FwRev=JS8IAD1A, SerialNo=481BWL69914
 Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs }
 RawCHS=16383/15/63, TrkSize=0, SectSize=0, ECCbytes=4
 BuffType=DualPortCache, BuffSize=1874kB, MaxMultSect=16, MultSect=16
 CurCHS=16383/15/63, CurSects=15481935, LBA=yes, LBAsects=62506080
 IORDY=on/off, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120}
 PIO modes: pio0 pio1 pio2 pio3 pio4 
 DMA modes: mdma0 mdma1 mdma2 udma0 udma1 *udma2 udma3 udma4 
 Drive Supports : Reserved : ATA-2 ATA-3 ATA-4 ATA-5 
 Kernel Drive Geometry LogicalCHS=4134/240/63 PhysicalCHS=66144/15/63

Markus

----- The Linux ThinkPad mailing list -----
The linux-thinkpad mailing list home page is at:
http://www.bm-soft.com/~bm/tp_mailing.html