[ltp] Linksys Etherfast 10/100 PC Card

[Joe Luker]

Thanks very much Peter:

>>Are you running a RH kernel, or your own?  Version?
Default from RH7.1 upgrade and it's 2.4.2-2.

>>Card Services or Yenta?
I had pcmcia-cs prior to the last upgrade, but it's no longer with me according to
an RPM query, yet I see it AND a yenta output line in the dmesg output but rpm -q
yenta or Yenta shows nothing?  What is it?  Perhaps if both are attempting to
perform the same functions that might be a problem?

from dmesg
...
Linux PCMCIA Card Services 3.1.22
  options:  [pci] [cardbus] [pm]
PCI: Found IRQ 11 for device 00:02.0
PCI: The same IRQ used for device 00:03.0
PCI: Found IRQ 11 for device 00:02.1
Yenta IRQ list 0698, PCI irq11
Socket status: 30000010
Yenta IRQ list 0698, PCI irq11
Socket status: 30000006
cs: IO port probe 0x0100-0x04ff: excluding 0x130-0x137 0x200-0x207 0x220-0x22f
0x388-0x38f 0x3b8-0x3df 0x4d0-0x4d7
cs: memory probe 0xa0000000-0xa0ffffff: clean.
eth0: pcnet_reset_8390() did not complete.
pcnet_cs: sorry, the AX88190 chipset is not supported.
pcnet_cs: unable to read hardware net address for io base 0x300
NET4: Linux IPX 0.46 for NET4.0
...






----- The Linux ThinkPad mailing list -----
The linux-thinkpad mailing list home page is at:
http://www.bm-soft.com/~bm/tp_mailing.html