[ltp] sound on tp600e... please help me :-(

[Thomas Hood]

I suspect that either irq 5 or irq 9 is already in use.
In some kernels, irq 9 is reserved.  I'd suggest that you
disable the MPU401 interface --- you don't need it unless
you are controlling external MIDI devices from your computer.

Thomas Hood

 --- Pino Giaquinto <doigia@tin.it> wrote: \
> I have installed mwave driver... my modem work fine !
> I want sound also !!!
> Someone have sound that work on TP600E ???
> Please tell me your Linux version and/or distribution and your ALSA
> version...
> Have you installed ALSA library and utils also ???
> 
> I have installed ALSA driver 0.5.11, library 0.5.10b, utils 0.5.10
> I have 2.2.19 Linux kernel (Slackware 8) recompiled (just "souncore.o"
> module in audio section)... some suggestions for my ".config" ???
> 
> Output of "lspci -v -s 00:06" is:
>   00:06.0 Multimedia audio controller: Cirrus Logic CS 4610/11 CristalClear
> Sound
>   Fusion Audio Accelerator] (rev 01)
>         Flags: bus master, medium devsel, latency 32, IRQ 11
>         Memory at 50100000 (32-bit, non prefetchable)
>         Memory at 50000000 (32-bit, non prefetchable)
> 
> Output of "PS2 ? AU" is:
>   Current State: Enable
>   ADDress : 530
>   IRQ : 5
>   SBaddress : 220
>   DMA : 0 1
> 
> Output of "PS2 ? MIDI" is:
>   Current State : Enable
>   ADDress : 330
>   IRQ : 9
> 
> My ALSA section of "modules.conf" is:
>   ### ALSA sound ###
>   #
>   # ALSA native device support
>   #
>   alias char-major-116 snd
>   options snd snd_major=116 snd_cards_limit=1 snd_device_mode=0666
> snd_device_gid=0 snd_device_uid=0
>   #
>   alias sound snd-card-0
>   alias snd-card-0 snd-card-cs4236
>   #
>   options snd-card-cs4236 snd_index=0 snd_id=Card1 snd_isapnp=0
> snd_port=0x530 snd_cport=0x538 snd_mpu_port=0x330 snd_fm_port=0x388...
>   ... snd_sb_port=0x220 snd_irq=5 snd_dma1=1 snd_dma2=0 snd_mpu_irq=9 #
> snd_dma1_size=32 snd_dma2_size=32
>   #
>   # OSS/Free emulation setup
>   alias char-major-14 soundcore
>   alias sound-slot-0 snd-card-0
>   alias sound-service-0-0 snd-mixer-oss
>   alias sound-service-0-1 snd-seq-oss
>   alias sound-service-0-3 snd-pcm-oss
>   alias sound-service-0-8 snd-seq-oss
>   alias sound-service-0-12 snd-pcm-oss
>   alias snd-minor-oss-0 snd-card-cs4236
>   alias snd-minor-oss-1 snd-opl3
>   alias snd-minor-oss-3 snd-pcm-oss
> 
> I start ALSA from command line, after reboot, with:
>   modprobe snd-card-cs4236
> 
> All I can see is the error message:
>   Device or resource busy
> 
> Output of "lsmod" is:
> 
> 
> Why sound work on your TP600 but on mine not work ???
> :-(
> 
> 
> 
> ----- The Linux ThinkPad mailing list -----
> The linux-thinkpad mailing list home page is at:
> http://www.bm-soft.com/~bm/tp_mailing.html 

=====
Linux on ThinkPad 600 page: http://panopticon.csustan.edu/thood/tp600lnx.htm

____________________________________________________________
Do You Yahoo!?
Get your free @yahoo.co.uk address at http://mail.yahoo.co.uk
or your free @yahoo.ie address at http://mail.yahoo.ie

----- The Linux ThinkPad mailing list -----
The linux-thinkpad mailing list home page is at:
http://www.bm-soft.com/~bm/tp_mailing.html