looking for XF86Config-4 for 770X @ 1280x1024 - was Re: [ltp] [770x] Problem with XFree86 V4.1.0.1 and screen size

Henk Hesselink linux-thinkpad@www.bm-soft.com
Sat, 29 Sep 2001 15:08:19 +0200


This is a multi-part message in MIME format.
--------------A53EDC4960DADE12AD52B453
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

Brian,

This is the XF86Config-4 I have working on my 770X.  It uses both
a USB mouse and the trackpoint, other than that I've done no tweaking
from the Mandrake-generated original.

Hope it helps.

Cheers,

Henk Hesselink
Anda Consulting

> So, yes, I am looking for a working XF86Config-4 from a 770x user :) I
> just thought that this was the most likely place to ask...
> 
> So, is there anyone out there who has XFree86 version 4.x working and
> would be willing to share their config file??? Please??!!??
> 
> Thanks again for those who have helped,
> 
> bab
> 
> --
> Brian Button            bbutton@objectmentor.com
> Senior Consultant       Object Mentor, Inc
> St. Louis, MO           http://www.objectmentor.com
> 
> Extreme Programming in St. Louis - http://groups.yahoo.com/group/xpstl
> 
> ----- The Linux ThinkPad mailing list -----
> The linux-thinkpad mailing list home page is at:
> http://www.bm-soft.com/~bm/tp_mailing.html
--------------A53EDC4960DADE12AD52B453
Content-Type: text/plain; charset=us-ascii;
 name="XF86Config-4"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
 filename="XF86Config-4"


# File generated by XFdrake.

# **********************************************************************
# Refer to the XF86Config(4/5) man page for details about the format of
# this file.
# **********************************************************************

Section "Files"

    RgbPath	"/usr/X11R6/lib/X11/rgb"

# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Mandrake 6.0 and later now use a font server independent of
# the X server to render fonts.

    FontPath   "unix/:-1"

EndSection

# **********************************************************************
# Server flags section.
# **********************************************************************

Section "ServerFlags"

    # Uncomment this to cause a core dump at the spot where a signal is
    # received.  This may leave the console in an unusable state, but may
    # provide a better stack trace in the core dump to aid in debugging
    #NoTrapSignals

    # Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
    # This allows clients to receive this key event.
    #DontZap

    # Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
    # sequences.  This allows clients to receive these key events.
    #DontZoom

    # This  allows  the  server  to start up even if the
    # mouse device can't be opened/initialised.
    AllowMouseOpenFail

EndSection

# **********************************************************************
# Input devices
# **********************************************************************

# **********************************************************************
# Keyboard section
# **********************************************************************

Section "InputDevice"

    Identifier "Keyboard1"
    Driver      "Keyboard"
    Option "AutoRepeat"  "250 30"

    Option "XkbRules" "xfree86"
    Option "XkbModel" "pc105"
    Option "XkbLayout" "us"

EndSection

# **********************************************************************
# Pointer section
# **********************************************************************

Section "InputDevice"

    Identifier  "Mouse1"
    Driver      "mouse"
    Option "Protocol"    "IMPS/2"
    Option "Device"      "/dev/usbmouse"
    Option "ZAxisMapping" "4 5"

# ChordMiddle is an option for some 3-button Logitech mice

#    Option "ChordMiddle"

EndSection

Section "InputDevice"

    Identifier  "Mouse2"
    Driver      "mouse"
    Option "Protocol"    "PS/2"
    Option "Device"      "/dev/psmouse"
    Option "ZAxisMapping" "4 5"
EndSection



Section "Module"

# This loads the DBE extension module.

    Load	"dbe"


# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.

    Load	"extmod"
#    SubSection	"extmod"
#	#Option	"omit xfree86-dga"
#    EndSubSection

# This loads the Type1 and FreeType font modules

    Load	"type1"
    Load	"freetype"

    Load	"glx"
    Load	"dri"
EndSection

Section "DRI"
    Mode	0666
EndSection


# **********************************************************************
# Monitor section
# **********************************************************************

# Any number of monitor sections may be present

Section "Monitor"
    Identifier "Generic|Multi-frequency that can do 1280x1024 at 76 Hz"
    VendorName "Unknown"
    ModelName  "Unknown"


# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
    HorizSync  31.5-82.0


# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
    VertRefresh 40-100


EndSection



# **********************************************************************
# Graphics device section
# **********************************************************************

Section "Device"
    Identifier "Generic VGA"
    Driver     "vga"
EndSection

Section "Device"
    Identifier  "Trident Cyber 9397 DVD (generic)"
    VendorName  "Unknown"
    BoardName   "Unknown"
    Driver      "trident"
    # Option      "CyberShadow" "off"
    # VideoRam    8192
    # Clock lines


    # Uncomment following option if you see a big white block        
    # instead of the cursor!                                          
    #    Option      "sw_cursor"

    Option      "DPMS"
##    Option      "Rotate" "CW"
EndSection



# **********************************************************************
# Screen sections
# **********************************************************************


Section "Screen"
    Identifier "screen1"
    Device      "Trident Cyber 9397 DVD (generic)"
    Monitor     "Generic|Multi-frequency that can do 1280x1024 at 76 Hz"
    DefaultColorDepth 16
    Subsection "Display"
        Depth       8
        Modes       "1280x1024" "1024x768" "800x600" "640x400"
        ViewPort    0 0
    EndSubsection
    Subsection "Display"
        Depth       15
        Modes       "1280x1024" "1024x768" "800x600" "640x480"
        ViewPort    0 0
    EndSubsection
    Subsection "Display"
        Depth       16
        Modes       "1280x1024" "1024x768" "800x600" "640x480"
        ViewPort    0 0
    EndSubsection
    Subsection "Display"
        Depth       24
        Modes       "1024x768" "800x600" "640x480"
        ViewPort    0 0
    EndSubsection
    Subsection "Display"
        Depth       32
        Modes       "1280x1024" "1024x768" "800x600" "640x480"
        ViewPort    0 0
    EndSubsection
EndSection


Section "ServerLayout"
    Identifier "layout1"
    Screen     "screen1"

    InputDevice "Mouse1" "CorePointer"
    InputDevice "Mouse2" "SendCoreEvents"

    InputDevice "Keyboard1" "CoreKeyboard"
EndSection

--------------A53EDC4960DADE12AD52B453--


----- The Linux ThinkPad mailing list -----
The linux-thinkpad mailing list home page is at:
http://www.bm-soft.com/~bm/tp_mailing.html