[ltp] ThinkPad A20P Modem - Make Error

[jjmckenzie51@earthlink.net]

All:

Latest version is 8a26-9 which includes both the code for GCC 2=2E9X and G=
CC
3=2Ex (compiled with GCC 3=2E2)=2E  This is what should be used with Red H=
at 8
and Mandrake 9 as they were built with GCC 3=2E  The installation script
detects and autoselects the version of the Agere proprietary code that
should be used=2E  I built lt-modem=2Eo with GCC 3 using the scripts and h=
ad no
problems except the 'taint' message because of the non-GPL code=2E

James Mckenzie

Original Message:
-----------------
From: Tod Harter tharter@giantelectronicbrain=2Ecom
Date: Mon, 2 Dec 2002 17:45:16 -0500
To: linux-thinkpad@linux-thinkpad=2Eorg, sotl155360@earthlink=2Enet,
tomalek@mindspring=2Ecom
Subject: Re: [ltp] ThinkPad A20P Modem - Make Error


I think there is a quite newer version of that driver=2E Sorry I don't hav=
e
my=20
laptop here at the moment, and I just blew away its hard drive the other
day,=20
so I can't tell you exactly, but I know there was at least a version 6 and=
=20
maybe even 8 if I am not mistaken of that driver=2E

On Monday 02 December 2002 05:10 pm, Frank Roberts - SOTL wrote:
> Thanks for the reference but I do seem to have a slight problem=2E
> That is I am just way over my head=2E
>
> I did the following:
> 1=2E Downloaded the file ltmodem595us=2Esh to my RH desktop box=2E
> 2=2E Copied the file to floppy=2E
> 3=2E Installed floppy to Thinkpad
> 4=2E Copied file to /root
> Hope none of these transfers introduced an error=2E
> Anyway I then followed instruction through make command=2E
> 5=2E Make install produced the following error messages:
>
> make update-movefile
> make[1]: entering directory '/usr/src/linux-2=2E4=2E18-6mdk'
> gcc: -Wall -Wstrict-prototypes -02 -fomit-frame-pointer -o
>         scripts/split-include scripts/split-include=2Ec
> gcc installation problem, cannot exec 'cpp0': no such file or directory
> make: *** [scripts/split-include] Error 1
>
> If amy one has any suggestion I would appreciate the advice=2E
>
> And thanks for your consideration in reviewing this=2E
>
> Thanks
>
> Frank
>
> On Monday 02 December 2002 13:29, Charles E Taylor IV wrote:
> > http://www-124=2Eibm=2Ecom/acpmodem/FAQ :
> > | ACP Modem (Mwave) - Frequently Asked Questions (FAQ)
> > | ----------------------------------------------------
> > |
> > | * Does this driver provide Linux support for the Lucent winmodem in =
my
> > | Thinkpad TP390X, TP570E, 600X, A2*, T2*, X20?
> > |
> > | - No, the driver you are looking for is available here:
> > | http://www=2Epc=2Eibm=2Ecom/qtechinfo/MIGR-4VFTT3=2Ehtml
> >
> > Sounds like you probably need the Lucent drivers=2E
> > On Mon, 2 Dec 2002 13:24:38 -0500
> >
> > Frank Roberts - SOTL <sotl155360@earthlink=2Enet> wrote:
> > > First
> > > I have a Thinkpad A20P with a 50 GB hd split into 3 partitions as
> > > follows: Windows XP, Common Data, Linux - Mandrake 8=2E2
> > >
> > > Now here comes the problem:
> > > Modem is not operation in Linux but is in Windows so I downloaded th=
e
> > > tar file mwave-1=2E0=2E4tar for the mwave modem=2E
> > >
> > > I think it is but I am just not sure on this so my major question is=

> > > this the correct modem file for a Think Pad A20P or not?

--=20
Tod Harter
Giant Electronic Brain
--=20
The linux-thinkpad mailing list home page is at:
http://mailman=2Elinux-thinkpad=2Eorg/mailman/listinfo/linux-thinkpad

--------------------------------------------------------------------
mail2web - Check your email from the web at
http://mail2web=2Ecom/ =2E