[ltp] no sound under linux on 600e

[Dan Sawyer]

Thank you,

I have sound under windows however this did not work.

cat /proc/pci shows a cs4610/11 loaded. What does /etc/pci show on your 
system?

Below is output from /etc/init.d/cs4232 restart. (dmesg shows simular 
info.)

/lib/modules/2.4.18-18.8.0custom/kernel/drivers/sound/cs4232.o: 
init_module: No
such device
Hint: insmod errors can be caused by incorrect module parameters, 
including invalid IO or IRQ parameters.
      You may find more information in syslog or the output from dmesg
/lib/modules/2.4.18-18.8.0custom/kernel/drivers/sound/cs4232.o: insmod 
/lib/modules/2.4.18-18.8.0custom/kernel/drivers/sound/cs4232.o failed
/lib/modules/2.4.18-18.8.0custom/kernel/drivers/sound/cs4232.o: insmod 
cs4232 failed

Thanks,
Dan

tmfu wrote:

> Dan Sawyer wrote:
>
>> All,
>>
>> The system is a 600e with a 4610/11 reported. Sound works under Win 
>> however it does not work on the 600e.
>>
>> I would appreciate a copy of the /etc/modules.conf setup that works 
>> for the 4610 reported in /etc/...
>>
>> Thanks,
>> Dan
>>
>
> To /etc/modules.conf, add:
> ----
> alias sound-slot-0 cs4232
> options sound dmabuf=1
> alias midi opl3
> options opl3 io=0x388
> options cs4232 io=0x530 irq=5 dma=1 dma2=0 mpuio=0x330 mpuirq=9
> ----
>  Create /etc/isapnp.gone:
> ----
> # COM1
> # MGA: you can comment out COM1, not much diff
> IO 0x3f8,8
> IRQ 4
> #
> # COM2
> IO 0x2f8,8
> IRQ 3
> #
> # Parallel
> IO 0x378,2
> IRQ 7
> #
> # PS2 mouse
> IRQ 12
> #
> # Sound
> ##IO 0x220,16
> IO 0x530,4
> IO 0x538,4
> IO 0x388,4
> IO 0x220,4
> IRQ 5
> IRQ 9
> DMA 1
> DMA 0
> ----
>  Create the following file, as /etc/rc.d/init.d/cs4232
> ----
> #!/bin/bash
> # chkconfig: 345 84 16
> # description: Starts/stops the CS4232 driver at boot time and shutdown
> HOME=/etc
> case "$1" in
> start)
> echo "Starting CS4232 driver"
> rmmod cs4232
> modprobe cs4232
> ;;
> stop)
> echo "Stopping CS4232 driver"
> rmmod cs4232
> ;;
> restart)
> $0 stop
> $0 start
> ;;
> status)
> echo "Status (NO-OP)"
> ;;
> *)
> echo "Usage: cs4232 {start|stop|status|restart}"
> exit 1
> esac
>
> exit 0
> ----
>  Create some links to this file, to run it when runlevel changes:
>  cd /etc/rc.d/rc3.d/
>  ln -s /etc/rc.d/init.d/cs4232 S83cs4232
>  cd /etc/rc.d/rc5.d/
>  ln -s /etc/rc.d/init.d/cs4232 S83cs4232
>  Now do a reboot, and test:
>  play /usr/share/sounds/info.wav
>  play /usr/share/sounds/startup3.wav
>  I still see error messages in /var/log/messages:
>   kernel: ad1848: Interrupt test failed (IRQ5)
>  but everything seems to be working. Now you can listen to streaming 
> audio on the web, via Real Player.
>
> If sound stops working, reload the module:
>  /sbin/rmmod cs4232; /sbin/modprobe cs4232
>
>
> Hope this helps. I too have a TP600E. I actually have everything 
> working(MWave modem included ). If you need anymore help just ask.
> Also under DOS/Windows make sure using PS2.EXE to check your settings.
>
>
>