[ltp] IRQ/DRQ

[Thomas Hood]

On Sun, 2002-12-15 at 12:39, Bartlomiej Swiercz wrote:
> Hi,
> I have thinkpad 600E, and Linux Debian on it. Everything was working
> good, until I bought pcmcia card. Now I have irq conflict between sound
> card and pcmica network card. I use cs4232 module with this options:
> options cs4232 io=0x530 irq=5 dma=1 dma2=0 mpuio=330 mpuirq=9
> When I run cardmgr I see this message:
> .......
> eth0: Megahertz 574B at io 0x300, irq 3, hw_addr 00:01:03:A6:63:B6.
>   ASIC rev 1, 64K FIFO split 1:1 Rx:Tx, autoselect MII interface.
> ......
> Why I have irq problem? The sound card use irq 5 and pcmcia use irq 3.
> I don't understand it.
> When I use mpg321 *.mp3 I see erroy:
> Sound: DMA (output) timed out - IRQ/DRQ config error?

The PCMCIA is probably conflicting with one of the
built in serial interfaces.

Either disable this interface or put the following line in
your /etc/pcmcia/config.opts:
     exclude irq 3
     exclude irq 5
so that cardmgr won't assign IRQ 3 or 5 to the PCMCIA card.

See http://panopticon.csustan.edu/thood/config.opts for my
config.opts file (for a 600X).

--
Thomas
-- 
Thomas Hood <jdthood2@yahoo.co.uk>

__________________________________________________
Do You Yahoo!?
Everything you'll ever need on one web page
from News and Sport to Email and Music Charts
http://uk.my.yahoo.com