[ltp] Memory Module Question 2

[Shingo Tamaru]

Luca.
I recently encountered this info.

In order for TP600 to recognize full memory size,
one of the two memory slots needs to have PC66 module.
If a PC100 module is installed into the slot which
can take only PC66, the half bank of the memory module
is disabled.

I found that one guy successfully installed even
32MB onboard + 128MB PC66 + 256MB PC100 = 416MB total
on TP600.

http://zurich.ai.mit.edu/hypermail/thinkpad/2002-05/0397.html

Shingo


----- Original Message ----- 
From: "Luca Benelli" <luca.benelli@libero.it>
To: <linux-thinkpad@www.bm-soft.com>
Sent: Friday, June 28, 2002 9:17 AM
Subject: [ltp] Memory Module Question 2


> Hi everybody,
> Talking about memory...
> does anybody know why my TP600 uses less than the available memory?
> The TP600 should be able to use up to 256 MB of RAM... 32 are onboard and I
> added 2*128Mb that should add up to 288... but when i boot the system only
> 228 are usable (the bios sees the complete amount but it says that only 228
> are usable)...
> 
> Thanks in advance, Luca
> 
> 
> ----- The Linux ThinkPad mailing list -----
> The linux-thinkpad mailing list home page is at:
> http://www.bm-soft.com/~bm/tp_mailing.html
> 



----- The Linux ThinkPad mailing list -----
The linux-thinkpad mailing list home page is at:
http://www.bm-soft.com/~bm/tp_mailing.html