[ltp] SCSI Problems

[Aly Dharshi]

Hi All,

	I have a Thinkpad 770E running RH 7.3 and a Adaptec SlimSCSI 1460.
After up2dating from RH site to the latest kernel 2.4.18-5 I get the following
problems in trying to access my scsi burner and external HD's -sorry for the

long log post - :

Jun 30 15:13:52 rez481 kernel: Yenta IRQ list 0698, PCI irq11
Jun 30 15:13:52 rez481 kernel: Socket status: 30000010
Jun 30 15:13:52 rez481 kernel: Yenta IRQ list 0698, PCI irq11
Jun 30 15:13:52 rez481 kernel: Socket status: 30000010
Jun 30 15:13:54 rez481 cardmgr[10920]: starting, version is 3.1.22
Jun 30 15:13:54 rez481 cardmgr[10920]: config error, file './config.opts'
line
8: no function bindings
Jun 30 15:13:54 rez481 cardmgr[10920]: watching 2 sockets
Jun 30 15:13:54 rez481 kernel: cs: IO port probe 0x0c00-0x0cff: clean.
Jun 30 15:13:54 rez481 kernel: cs: IO port probe 0x0100-0x04ff: excluding
0x388-0x38f 0x3b8-0x3df 0x4d0-0x4d7
Jun 30 15:13:54 rez481 kernel: cs: IO port probe 0x0a00-0x0aff: clean.
Jun 30 15:13:54 rez481 cardmgr[10920]: initializing socket 0
Jun 30 15:13:54 rez481 kernel: cs: memory probe 0xa0000000-0xa0ffffff:
clean.
Jun 30 15:13:54 rez481 cardmgr[10920]: socket 0: Adaptec APA-1460 SlimSCSI
Jun 30 15:13:54 rez481 cardmgr[10920]: executing: 'modprobe aha152x_cs'
Jun 30 15:13:54 rez481 kernel: aha152x: processing commandline: ok
Jun 30 15:13:54 rez481 kernel: aha152x: BIOS test: passed, detected 1
controller(s)
Jun 30 15:13:54 rez481 kernel: aha152x: resetting bus...
Jun 30 15:13:54 rez481 kernel: aha152x0: vital data: rev=1, io=0x340
(0x340/0x340), irq=3, scsiid=7, reconnect=enabled, parity=enabled,
synchronous=disabled, delay=100, extended translation=disabled
Jun 30 15:13:54 rez481 kernel: aha152x0: trying software interrupt, lost.
Jun 30 15:13:54 rez481 kernel: aha152x0: IRQ 3 possibly wrong.  Please
verify.
Jun 30 15:13:54 rez481 kernel: aha152x_cs: no SCSI devices found
Jun 30 15:13:54 rez481 cardmgr[10920]: get dev info on socket 0 failed: No
such
device
Jun 30 15:13:54 rez481 kernel: Trying to free nonexistent resource
<00000340-0000035f>
Jun 30 15:13:54 rez481 cardmgr[10920]: initializing socket 1
Jun 30 15:13:54 rez481 cardmgr[10920]: socket 1: 3Com 589 Ethernet
Jun 30 15:13:54 rez481 cardmgr[10920]: executing: 'modprobe 3c589_cs'
Jun 30 15:13:54 rez481 cardmgr[10920]: executing: './network start eth0'
Jun 30 15:13:54 rez481 kernel: eth0: 3Com 3c589, io 0x300, irq 3, hw_addr
00:60:97:8B:F8:3E
Jun 30 15:13:54 rez481 kernel:   8K FIFO split 5:3 Rx:Tx, auto xcvr
Jun 30 15:13:54 rez481 /etc/hotplug/net.agent: invoke ifup eth0
Jun 30 15:13:56 rez481 kernel: eth0: flipped to 10baseT


	It seems to find IRQ 3 locked up, how would I find a free IRQ and
force the module aha152x_cs to use it. Thanks.

	Cheers,

	Aly.


-- 
Aly Dharshi
aly.dharshi@uleth.ca
aly.dharshi@smail.info
System Administrator ORS Servers

	"A good speech is like a good dress
	that's short enough to be interesting
	and long enough to cover the subject"


----- The Linux ThinkPad mailing list -----
The linux-thinkpad mailing list home page is at:
http://www.bm-soft.com/~bm/tp_mailing.html