[ltp] readcd problem.

[Jean-Sebastien Morisset]

Has anyone successfully used readcd on their T30? Here's what I get:

jsmoriss@zaphod:~$ readcd dev=0,0 f=/export/tmp/test.iso

Capacity: 203624 Blocks = 407248 kBytes = 397 MBytes = 417 prMB
Sectorsize: 2048 Bytes
Copy from SCSI (0,0,0) disk to file '/export/tmp/test.iso'
end:    203624
readcd: Input/output error. read_g1: scsi sendcmd: no error
CDB:  28 00 00 00 00 00 00 00 80 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 25 00 00 00 00 0A 00 00 00 00 64 00 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x64 Qual 0x00 (illegal mode for this track) Fru 0x0
Sense flags: Blk 0 (not valid) illegal block length 
cmd finished after 0.002s timeout 40s
readcd: Input/output error. Cannot read source disk
readcd: Retrying from sector 0.
.~~-~~~+~~~-~~~+~~~-~~~+~~~-~~~+~~~-~~~+~~~-~~~+~~~-~~~+~~~-~~~+~~~-~~~+~~~-~~~+~~~-~~~+~~~-~~~+~~~-~~~+~~~-~~~+~~~-~~~
readcd: Input/output error. Error on sector 0 not corrected. Total of 1
errors.
Time total: 0.625sec
Read 0.00 kB at 0.0 kB/sec.


Any ideas?

Thanks,
js.
-- 
Jean-Sebastien Morisset, Sr. UNIX Administrator <jsmoriss@mvlan.net>
Personal Home Page <http://jsmoriss.mvlan.net:8080/>
"With sufficient thrust, pigs fly just fine." -- RFC 1925