[ltp] USB keyboard won't work with linux (suse 8.0)

[Boyan]

Hello,

still having unsurmountable problems letting the IBM (Chicony) Trackpoint
Spacesaver USB keyboard with HUB to work. Initially when it boots it's
there and I can select in Lilo but after linux loads the keys are dead.

Tried different BIOS changes in almost all possible combinations like
"enable usb mouse, usb keyboard, set usb irq, enable pnp, acpi". With the
thinkpad seems better, keys work but mouse doesn't. With the desktop
rarely the mouse functions. Below I attach some output from
/var/log/messages. Hope someone could decipher the problem and this "-6"
error.

Regards,
Boyan

Attachment: /var/log/messages

Nov  8 11:19:46 work kernel: usb-uhci.c: ENXIO 80000280, flags 0, urb c237ef40, burb c237eec0
Nov  8 11:19:46 work kernel: hub.c: usb_hub_port_status (2) failed (err = -6)
Nov  8 11:19:46 work kernel: usb-uhci.c: ENXIO 80000280, flags 0, urb c237ef40, burb c237eec0
Nov  8 11:19:46 work kernel: hub.c: usb_hub_port_status (2) failed (err = -6)
Nov  8 11:19:46 work kernel: usb-uhci.c: ENXIO 80000280, flags 0, urb c237ef40, burb c237eec0
Nov  8 11:19:46 work kernel: hub.c: get_hub_status failed
Nov  8 11:19:46 work kernel: hub.c: USB new device connect on bus1/1/2, assigned device number 3
Nov  8 11:19:46 work kernel: usb.c: USB device 3 (vend/prod 0x4b3/0x300f) is not claimed by any active driver.
Nov  8 11:19:46 work kernel: usb.c: registered new driver hiddev
Nov  8 11:19:46 work kernel: usb.c: registered new driver hid
Nov  8 11:19:46 work kernel: usb-uhci.c: interrupt, status 3, frame# 685
Nov  8 11:19:46 work kernel: input0,hiddev0: USB HID v1.10 Mouse [Chicony USB Trackpoint pointing device] on usb1:3.0
Nov  8 11:19:46 work kernel: hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech@suse.cz>
Nov  8 11:19:46 work kernel: hid-core.c: USB HID support drivers
Nov  8 11:19:46 work kernel: mice: PS/2 mouse device common for all mice

Nov  8 12:52:36 work kernel: usb.c: new USB bus registered, assigned bus number 2
Nov  8 12:52:36 work kernel: hub.c: USB hub found
Nov  8 12:52:36 work kernel: hub.c: 2 ports detected
Nov  8 12:52:36 work kernel: usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
Nov  8 12:52:36 work kernel: hub.c: USB new device connect on bus1/1, assigned device number 2
Nov  8 12:52:36 work kernel: hub.c: USB hub found
Nov  8 12:52:36 work kernel: hub.c: 4 ports detected
Nov  8 12:52:36 work kernel: usb-uhci.c: ENXIO 80000280, flags 0, urb c2591dc0, burb c2591d40
Nov  8 12:52:36 work kernel: hub.c: usb_hub_port_status (2) failed (err = -6)
Nov  8 12:52:36 work kernel: hub.c: connect-debounce failed, port 1 disabled
Nov  8 12:52:36 work kernel: usb-uhci.c: ENXIO 80000200, flags 0, urb c2591dc0, burb c2591d40
Nov  8 12:52:36 work kernel: hub.c: cannot disable port 1 of hub 2 (err = -6)
Nov  8 12:52:36 work kernel: usb-uhci.c: ENXIO 80000280, flags 0, urb c2591dc0, burb c2591d40
Nov  8 12:52:36 work kernel: hub.c: usb_hub_port_status (2) failed (err = -6)
Nov  8 12:52:36 work kernel: usb-uhci.c: ENXIO 80000280, flags 0, urb c2591dc0, burb c2591d40
Nov  8 12:52:36 work kernel: hub.c: usb_hub_port_status (2) failed (err = -6)
Nov  8 12:52:36 work kernel: usb-uhci.c: ENXIO 80000280, flags 0, urb c2591dc0, burb c2591d40
Nov  8 12:52:36 work kernel: hub.c: usb_hub_port_status (2) failed (err = -6)
Nov  8 12:52:36 work kernel: usb-uhci.c: ENXIO 80000280, flags 0, urb c2591dc0, burb c2591d40
Nov  8 12:52:36 work kernel: hub.c: get_hub_status failed
Nov  8 12:52:36 work kernel: usb-uhci.c: ENXIO 80000280, flags 0, urb c2591dc0, burb c2591d40
Nov  8 12:52:36 work kernel: hub.c: usb_hub_port_status (2) failed (err = -6)
Nov  8 12:52:36 work kernel: usb-uhci.c: ENXIO 80000280, flags 0, urb c2591dc0, burb c2591d40
Nov  8 12:52:36 work kernel: hub.c: usb_hub_port_status (2) failed (err = -6)
Nov  8 12:52:36 work kernel: usb-uhci.c: ENXIO 80000280, flags 0, urb c2591dc0, burb c2591d40
Nov  8 12:52:36 work kernel: hub.c: usb_hub_port_status (2) failed (err = -6)
Nov  8 12:52:36 work kernel: usb-uhci.c: ENXIO 80000280, flags 0, urb c2591dc0, burb c2591d40
Nov  8 12:52:36 work kernel: hub.c: usb_hub_port_status (2) failed (err = -6)
Nov  8 12:52:36 work kernel: usb-uhci.c: ENXIO 80000280, flags 0, urb c2591dc0, burb c2591d40
Nov  8 12:52:36 work kernel: hub.c: get_hub_status failed
Nov  8 12:52:36 work kernel: usb-uhci.c: ENXIO 80000280, flags 0, urb c2591d40, burb c2591dc0
Nov  8 12:52:36 work kernel: usbdevfs: USBDEVFS_CONTROL failed dev 2 rqt 128 rq 6 len 25 ret -6
Nov  8 12:52:36 work kernel: usb-uhci.c: ENXIO 80000280, flags 0, urb c2591dc0, burb c2591ec0
Nov  8 12:52:36 work last message repeated 2 times
Nov  8 12:52:36 work kernel: usb-uhci.c: ENXIO 80000280, flags 0, urb c2591dc0, burb c2591e40
Nov  8 12:52:36 work kernel: hub.c: usb_hub_port_status (2) failed (err = -6)
Nov  8 12:52:36 work kernel: hub.c: connect-debounce failed, port 2 disabled
Nov  8 12:52:36 work kernel: usb-uhci.c: ENXIO 80000200, flags 0, urb c2591dc0, burb c2591e40
Nov  8 12:52:36 work kernel: hub.c: cannot disable port 2 of hub 2 (err = -6)
Nov  8 12:52:36 work kernel: usb-uhci.c: ENXIO 80000280, flags 0, urb c2591dc0, burb c2591e40
Nov  8 12:52:36 work kernel: hub.c: usb_hub_port_status (2) failed (err = -6)
Nov  8 12:52:36 work kernel: usb-uhci.c: ENXIO 80000280, flags 0, urb c2591dc0, burb c2591e40
Nov  8 12:52:36 work kernel: hub.c: usb_hub_port_status (2) failed (err = -6)
Nov  8 12:52:36 work kernel: usb-uhci.c: ENXIO 80000280, flags 0, urb c2591dc0, burb c2591e40
Nov  8 12:52:36 work kernel: hub.c: get_hub_status failed
Nov  8 12:52:38 work kernel: isapnp: Scanning for PnP cards...