[ltp] Redhat 7.3 and sound

[E, Vil]

I dont completely understand that, but this is what ive tried as of far..

tried using both IRQS , I/O info, and DMA info from my win98 and winXP
(tri-boot)
those didnt work

tried switching around DMAS, that did work

I dont know what else to do ? :-(

----- Original Message -----
From: "root" <jjmckenzie51@earthlink.net>
To: <linux-thinkpad@linux-thinkpad.org>
Sent: Wednesday, October 02, 2002 12:52 AM
Subject: Re: [ltp] Redhat 7.3 and sound


> Actually, copy over the modules.conf portion for the cs42xx sound device
ONLY!
>
> Reboot and look at the startup message file by running dmesg | more.  You
> should see some lines simular to the following:
>
> Crystal 4280/46xx + AC97 Audio, version 1.28.32, 06:30:34 Jun  1 2002
> cs46xx: Card found at 0xf0100000 and 0xf0000000, IRQ 11
> cs46xx: Thinkpad 600X/A20/T20 (1014:0153) at 0xf0100000/0xf0000000, IRQ 11
> ac97_codec: AC97 Audio codec, id: 0x4352:0x5914 (Cirrus Logic CS4297A rev
B)
>
> If not, the sound subsystem was NOT installed when you installed Red Hat
and
> needs to be installed.  There are instructions on the Internet on how to
set
> this up.
>
> Good luck and hope this helps.'
>
> BTW, I just had a great deal of fun installing RH 7.1 on a A22p.  Thanks
to
> the Linux-Laptops site I found some good hints on what to do to get
everything
> up and running.  Connecting to the Internet proved to be the most
difficult.
> Sound worked OTB.
>
> James Mckenzie
>
> Brandon Philips wrote:
>
> > Make sure your /etc/modules.conf looks similiar to mine... (attached)
> >
> > Good Luck
> >
> > -Brandon Philips
> >
> > On Sunday 29 September 2002 02:42 pm, The Evil One wrote:
> > > t 7.3, Windows 98, and XP
> > > If I setup the defaults for the cs4232 module in windows via ps2
> > > (ps2 audio enable)
> > > then restart my machine beeps twice, then restarts, seemingly moving
the
> > > IRQS and IO's around so once I do finally load linux I get module load
> > > failures
> > > I have tried the exact configuration I've seen people use on this
mailing
> > > list and it simply wont work for me, maybe im doing something wrong,
can
> >
>
  ------------------------------------------------------------------------
> >                    Name: modules.conf
> >    modules.conf    Type: Plain Text (text/plain)
> >                Encoding: 7bit
>
> --
> The linux-thinkpad mailing list home page is at:
> http://www.bm-soft.com/~bm/tp_mailing.html
>