Solution: [Re: [ltp] Thinkpad 240 Cardbus problems ...]

[Kacper Wysocki]

On 2003.04.28 18:06, Charles E Taylor IV wrote:
[SNIP]
> > I've managed to get everything to work on my Thinkpad 240 EXCEPT my
> > Dlink cardbus ethernet card.  The card's fine, as it works in my
> 770Z.
> > When I try the card in my 240, I get this in my logs:
> 
> > cs: cb_alloc(bus 0): vendor 0x8086, device 0x7192
> > PCI: Failed to allocate resource 0(14000000-10bfffff) for 00:00.0
[SNIP]
> Add "pci=assign-bussses" to the boot parameters fot the kernel.
[SNIP]

you could also try upgrading your bios-this might eliminate the need 
for "pci=assign-busses". YMMV

regards,
	Kacper