[ltp] ThinkPad 600X & Serial Port

Juan Pablo Martinez Sanchez linux-thinkpad@linux-thinkpad.org
Mon, 27 Jan 2003 23:34:36 +0100 (CET)


Hello,

yes, i made a bootable diskette to run ps2.exe, you can look at this web
page:

http://www.baiti.net/tp770x/ps2.html


To install tpctl you can download from:

http://sourceforge.net/projects/tpctl/

Hope to help you,


Juan Pablo.




On Mon, 27 Jan 2003, Linu Pan wrote:

>
> Hi ,
> Thanks for your answer.
> I will try with PS2.exe on my laptop and see how that gonna work out.
> Would you tell me how you run this PS2.exe ? as far as i know this is a DOS SW , correct ? so , you have booted this PS2.exe on the floppy disk when the machine was booting ?
>
> Thanx
>
> Linu
>  Juan Pablo Martinez Sanchez <is04796@salleURL.edu> wrote:
> Hello, at last i achieved to run the serial port once. I used PS2.EXE to
> ensure the port was ON and tpctl to enable it and configure.
>
> But i only achieved to communicate two PC's only once. The rest of the
> times the thinkpad is unable to receive any character, the output from the
> /proc/tty/driver/serial is:
>
> >0: uart:16550A port:3f8 irq:4 baud:19200 tx:31 rx:0 RTS|CTS|DTR|DSR|CD|RI
>
>
> I don't know if the options CD and RI are normal or not. The another PC
> doesn´t have the CD and RI options when transmitting...
>
> Any idea?. Thanks a lot,
>
>
> Juan Pablo Martinez.
>
>
>
>
> --
> The linux-thinkpad mailing list home page is at:
> http://mailman.linux-thinkpad.org/mailman/listinfo/linux-thinkpad
>
>
> ---------------------------------
> Do you Yahoo!?
> Yahoo! Mail Plus - Powerful. Affordable. Sign up now