[ltp] Linux IRDA drivers for the X30

[Tino Keitel]

On Tue, Jul 01, 2003 at 22:40:22 +0200, Jan Frey wrote:
> On Tuesday 01 July 2003 21:22, Tino Keitel wrote:
> > On Mon, Jun 30, 2003 at 14:46:31 +0200, Tino Keitel wrote:
> > > On Sun, Jun 29, 2003 at 17:37:06 +0200, Karl Trygve Kalleberg wrote:

[...]

> > Hum, I got the nsc-ircc.o module to load successfully (with a few
> > hacks), it detected the IBM IrDA hardware, but there was no real
> > IrDA traffic in the air. Using SIR with irtty it worked. Anybody
> > out there who had more luck with IrDA (FIR mode using the nsc-ircc
> > driver) on the A30?
> >
> > Regards,
> > Tino
> 
> Hi,
> 
> actually I wrote an updated driver for this NSC chip, but my latest
> developments are some time ago... Meanwhile the IrDA module
> maintainer sent me an update of my update; maybe support improved. My
> latest status was a working FIR driver, but I did not make it working
> faster than 115kB/s with my IrDA printer. Might be a problem of
> interoperability between the devices but more likely the driver is
> still not working correctly.

Forget what I said. I did not do setserial /dev/tts/1 uart none irq 0
port 0. FIR now works with 2.4.21-ac4.

Tino