[ltp] Kernel 2.4.20 and Realtek8139 with PCMCIA

[Dan Sawyer]

No, there should not be any difference between integrated and module.

What kind of a card is it? Something is way wrong for it to show up as 
irq 0.

I have trouble with various card types. Try booting w/o the card and 
inserting it.

pci is the link mechanism to cardbus; i.e. cardbus is a pci device, sort of.

Dan

Adam Southerland wrote:

> Here is what happens...
>
> Boot up......
>
> Linux Kernel Card Services 3.1.22
>  options [pci] [cardbus] [pm]
> PCI: No IRQ known for interrupt pin A of device 00:02.0.
> PCI: No IRQ known for interrupt pin B of device 00:02.1.
> Intel PCIC probe: not found.
>
> ... More Bootup ...
>
> Yenta IRQ list 06b8, PCI irq0
> Socket status: 30000006
> Yenta IRQ list 06b8, PCI irq0
> Socket status: 30000020
> cs: cb_alloc(bus 4): vendor 0x10ec, device 0x8139
> PCI: Enabling device 04:00.0 (0000 -> 0003)
> PCI: No IRQ known for interrupt pin A of device 04:00.0.
> 8139too Fast Ethernet driver 0.9.26
> PCI: No IRQ known for interrupt pin A of device 04:00.0.
> eth0: Realtek RTL8139 Fast Ethernet at 0xc2811000, 00:10:60:5a:f9:68, 
> IRQ 0
>
> ... More bootup ..
> .. running INIT...
> .. More bootup ...
>
> Attempting to configure eth0 by contacting DHCP Server.
> dhcpcd[51]: dhcpStart: ioctl SIOCSIFFLAGS: Device or resource busy
>
> .. Then the last of the bootup ...
>
> --- I compiled it into the kernel... would making it a module work any 
> better? (for PCMCIA)
> and why does it try and use PCI? I was under the impression that the 
> CardBus in this Thinkpad 760XL was 16-Bit... ISA I thought...
>
> btw... The above gives those errors when you pass pci=biosirq at boot 
> up... if you don't add it, it gives errors to use the pci init string...
>
> Thanks!
> Adam Southerland
>
> _________________________________________________________________
> Add photos to your e-mail with MSN 8. Get 2 months FREE*. 
> http://join.msn.com/?page=features/featuredemail
>