[ltp] any body use FreeBSD on Thinkpad??
zongliang li
linux-thinkpad@linux-thinkpad.org
Fri, 13 Jun 2003 12:0:8 +0800
The FreeBSD 5.1 Release can be installed on my T23 5SA,
But the Intel can not work and get the warning "fxp0 timeout"
Dmesg:
3 4 5 6 7 9 10 11 12 14 15
embedded 0 30 A 0x60 3 4 5 6 7 9 10 11 12 14 15
embedded 0 30 B 0x61 3 4 5 6 7 9 10 11 12 14 15
embedded 0 30 C 0x62 3 4 5 6 7 9 10 11 12 14 15
embedded 0 30 D 0x63 3 4 5 6 7 9 10 11 12 14 15
embedded 2 0 A 0x60 3 4 5 6 7 9 10 11 12 14 15
embedded 2 0 B 0x61 3 4 5 6 7 9 10 11 12 14 15
slot 1 2 2 A 0x62 3 4 5 6 7 9 10 11 12 14 15
slot 1 2 2 B 0x63 3 4 5 6 7 9 10 11 12 14 15
embedded 2 3 A 0x60 3 4 5 6 7 9 10 11 12 14 15
embedded 2 3 B 0x61 3 4 5 6 7 9 10 11 12 14 15
embedded 2 3 C 0x62 3 4 5 6 7 9 10 11 12 14 15
embedded 2 3 D 0x63 3 4 5 6 7 9 10 11 12 14 15
slot 2 9 0 A 0x60 3 4 5 6 7 9 10 11 12 14 15
slot 2 9 0 B 0x61 3 4 5 6 7 9 10 11 12 14 15
slot 2 9 0 C 0x62 3 4 5 6 7 9 10 11 12 14 15
slot 2 9 0 D 0x63 3 4 5 6 7 9 10 11 12 14 15
embedded 9 1 A 0x61 3 4 5 6 7 9 10 11 12 14 15
embedded 9 2 A 0x62 3 4 5 6 7 9 10 11 12 14 15
embedded 9 2 B 0x62 3 4 5 6 7 9 10 11 12 14 15
embedded 2 8 A 0x68 3 4 5 6 7 9 10 11 12 14 15
embedded 0 29 A 0x60 3 4 5 6 7 9 10 11 12 14 15
embedded 0 29 B 0x63 3 4 5 6 7 9 10 11 12 14 15
embedded 0 29 C 0x62 3 4 5 6 7 9 10 11 12 14 15
embedded 0 29 D 0x6b 3 4 5 6 7 9 10 11 12 14 15
embedded 0 31 A 0x62 3 4 5 6 7 9 10 11 12 14 15
embedded 0 31 B 0x61 3 4 5 6 7 9 10 11 12 14 15
AcpiOsDerivePciId: bus 0 dev 31 func 0
AcpiOsDerivePciId: bus 0 dev 0 func 0
ACPI-1287: *** Error: Method execution failed=
[\\_SB_.PCI0.LPC_.FDC_._INI] (Node 0xc4080880), AE_NOT_EXIST
ACPI-1287: *** Error: Method execution failed=
[\\_SB_.PCI0.LPC_.EC__._INI] (Node 0xc4077a40), AE_NOT_EXIST
ACPI-1287: *** Error: Method execution failed=
[\\_SB_.PCI0.LPC_.EC__.BAT0._STA] (Node 0xc4077260),=
AE_NOT_EXIST
ACPI-0175: *** Error: Method execution failed=
[\\_SB_.PCI0.LPC_.EC__.BAT0._STA] (Node 0xc4077260),=
AE_NOT_EXIST
ACPI-1287: *** Error: Method execution failed=
[\\_SB_.PCI0.LPC_.EC__.BAT1._STA] (Node 0xc407b160),=
AE_NOT_EXIST
ACPI-0175: *** Error: Method execution failed=
[\\_SB_.PCI0.LPC_.EC__.BAT1._STA] (Node 0xc407b160),=
AE_NOT_EXIST
AcpiOsDerivePciId: bus 2 dev 0 func 0
AcpiOsDerivePciId: bus 2 dev 0 func 1
ACPI-1287: *** Error: Method execution failed=
[\\_SB_.PCI0.LPC_.EC__.BGID] (Node 0xc40809c0), AE_NOT_EXIST
ACPI-1287: *** Error: Method execution failed=
[\\_SB_.PCI0.LPC_.EC__.BINI] (Node 0xc40809e0), AE_NOT_EXIST
ACPI-1287: *** Error: Method execution failed=
[\\_SB_.PCI0.LPC_.EC__.BSTA] (Node 0xc4080a20), AE_NOT_EXIST
ACPI-1287: *** Error: Method execution failed=
[\\_SB_.PCI0.IDE0.SCND.MSTR._STA] (Node 0xc40808e0),=
AE_NOT_EXIST
ACPI-0175: *** Error: Method execution failed=
[\\_SB_.PCI0.IDE0.SCND.MSTR._STA] (Node 0xc40808e0),=
AE_NOT_EXIST
ACPI-1287: *** Error: Method execution failed=
[\\_SB_.PCI0.LPC_.EC__.BGID] (Node 0xc40809c0), AE_NOT_EXIST
ACPI-1287: *** Error: Method execution failed=
[\\_SB_.PCI0.LPC_.EC__.BINI] (Node 0xc40809e0), AE_NOT_EXIST
ACPI-1287: *** Error: Method execution failed=
[\\_SB_.PCI0.LPC_.EC__.BSTA] (Node 0xc4080a20), AE_NOT_EXIST
ACPI-1287: *** Error: Method execution failed=
[\\_SB_.PCI0.USB0.URTH.UNST._STA] (Node 0xc4080f00),=
AE_NOT_EXIST
ACPI-0175: *** Error: Method execution failed=
[\\_SB_.PCI0.USB0.URTH.UNST._STA] (Node 0xc4080f00),=
AE_NOT_EXIST
acpi0: power button is handled as a fixed feature programming=
model.
ACPI timer looks GOOD min =3D 2, max =3D 3, width =3D 1
ACPI timer looks GOOD min =3D 2, max =3D 3, width =3D 1
ACPI timer looks GOOD min =3D 2, max =3D 3, width =3D 1
ACPI timer looks GOOD min =3D 2, max =3D 3, width =3D 1
ACPI timer looks GOOD min =3D 2, max =3D 3, width =3D 1
ACPI timer looks GOOD min =3D 2, max =3D 3, width =3D 1
ACPI timer looks GOOD min =3D 2, max =3D 3, width =3D 1
ACPI timer looks GOOD min =3D 2, max =3D 3, width =3D 1
ACPI timer looks GOOD min =3D 2, max =3D 3, width =3D 1
ACPI timer looks GOOD min =3D 2, max =3D 3, width =3D 1
Timecounter "ACPI-fast" frequency 3579545 Hz
ACPI-1287: *** Error: Method execution failed=
[\\_SB_.PCI0.LPC_.EC__.BAT0._STA] (Node 0xc4077260),=
AE_NOT_EXIST
ACPI-0175: *** Error: Method execution failed=
[\\_SB_.PCI0.LPC_.EC__.BAT0._STA] (Node 0xc4077260),=
AE_NOT_EXIST
ACPI-1287: *** Error: Method execution failed=
[\\_SB_.PCI0.LPC_.EC__.BAT1._STA] (Node 0xc407b160),=
AE_NOT_EXIST
ACPI-0175: *** Error: Method execution failed=
[\\_SB_.PCI0.LPC_.EC__.BAT1._STA] (Node 0xc407b160),=
AE_NOT_EXIST
ACPI-1287: *** Error: Method execution failed=
[\\_SB_.PCI0.LPC_.EC__.BGID] (Node 0xc40809c0), AE_NOT_EXIST
ACPI-1287: *** Error: Method execution failed=
[\\_SB_.PCI0.LPC_.EC__.BINI] (Node 0xc40809e0), AE_NOT_EXIST
ACPI-1287: *** Error: Method execution failed=
[\\_SB_.PCI0.LPC_.EC__.BSTA] (Node 0xc4080a20), AE_NOT_EXIST
ACPI-1287: *** Error: Method execution failed=
[\\_SB_.PCI0.IDE0.SCND.MSTR._STA] (Node 0xc40808e0),=
AE_NOT_EXIST
ACPI-0175: *** Error: Method execution failed=
[\\_SB_.PCI0.IDE0.SCND.MSTR._STA] (Node 0xc40808e0),=
AE_NOT_EXIST
ACPI-1287: *** Error: Method execution failed=
[\\_SB_.PCI0.LPC_.EC__.BGID] (Node 0xc40809c0), AE_NOT_EXIST
ACPI-1287: *** Error: Method execution failed=
[\\_SB_.PCI0.LPC_.EC__.BINI] (Node 0xc40809e0), AE_NOT_EXIST
ACPI-1287: *** Error: Method execution failed=
[\\_SB_.PCI0.LPC_.EC__.BSTA] (Node 0xc4080a20), AE_NOT_EXIST
ACPI-1287: *** Error: Method execution failed=
[\\_SB_.PCI0.USB0.URTH.UNST._STA] (Node 0xc4080f00),=
AE_NOT_EXIST
ACPI-0175: *** Error: Method execution failed=
[\\_SB_.PCI0.USB0.URTH.UNST._STA] (Node 0xc4080f00),=
AE_NOT_EXIST
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on=
acpi0
acpi_cpu0: <CPU> on acpi0
acpi_tz0: <thermal zone> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
ACPI-1287: *** Error: Method execution failed=
[\\_SB_.LID_._PSW] (Node 0xc150b480), AE_NOT_EXIST
acpi_button0: <Sleep Button> on acpi0
ACPI-1287: *** Error: Method execution failed=
[\\_SB_.SLPB._PSW] (Node 0xc150b400), AE_NOT_EXIST
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
---- initial configuration ------------------------
\\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11]=
low,level,sharable 0.2.0
\\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11]=
low,level,sharable 0.29.0
\\_SB_.LNKD irq 11: [ 3 4 5 6 7 9 10 11]=
low,level,sharable 0.29.1
\\_SB_.LNKC irq 11: [ 3 4 5 6 7 9 10 11]=
low,level,sharable 0.29.2
\\_SB_.LNKH irq 0: [ 3 4 5 6 7 9 10 11]=
low,level,sharable 0.29.3
\\_SB_.LNKC irq 11: [ 3 4 5 6 7 9 10 11]=
low,level,sharable 0.31.0
\\_SB_.LNKB irq 11: [ 3 4 5 6 7 9 10 11]=
low,level,sharable 0.31.1
---- before setting priority for links ------------
\\_SB_.LNKH:
=09interrupts:=09 3 4 5 6 7 9 10 11
=09penalty:=09 1110 1110 110 1110 1110 110 110 710
=09references:=091
=09priority:=090
---- before fixup boot-disabled links -------------
\\_SB_.LNKH:
=09interrupts:=09 3 4 5 6 7 9 10 11
=09penalty:=09 1110 1110 110 1110 1110 110 110 710
=09references:=091
=09priority:=09685
---- after fixup boot-disabled links --------------
---- arbitrated configuration ---------------------
\\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11]=
low,level,sharable 0.2.0
\\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11]=
low,level,sharable 0.29.0
\\_SB_.LNKD irq 11: [ 3 4 5 6 7 9 10 11]=
low,level,sharable 0.29.1
\\_SB_.LNKC irq 11: [ 3 4 5 6 7 9 10 11]=
low,level,sharable 0.29.2
\\_SB_.LNKH irq 10: [ 3 4 5 6 7 9 10 11]=
low,level,sharable 0.29.3
\\_SB_.LNKC irq 11: [ 3 4 5 6 7 9 10 11]=
low,level,sharable 0.31.0
\\_SB_.LNKB irq 11: [ 3 4 5 6 7 9 10 11]=
low,level,sharable 0.31.1
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=3D0
=09map[10]: type 3, range 32, base d0000000, size 28, enabled
found->=09vendor=3D0x8086, dev=3D0x3575, revid=3D0x04
=09bus=3D0, slot=3D0, func=3D0
=09class=3D06-00-00, hdrtype=3D0x00, mfdev=3D0
=09cmdreg=3D0x0106, statreg=3D0x2010, cachelnsz=3D0 (dwords)
=09lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
found->=09vendor=3D0x8086, dev=3D0x3576, revid=3D0x04
=09bus=3D0, slot=3D1, func=3D0
=09class=3D06-04-00, hdrtype=3D0x01, mfdev=3D0
=09cmdreg=3D0x0107, statreg=3D0x0020, cachelnsz=3D0 (dwords)
=09lattimer=3D0x60 (2880 ns), mingnt=3D0x0c (3000 ns), maxlat=3D0x00 (0=
ns)
=09map[20]: type 4, range 32, base 00001800, size 5, enabled
found->=09vendor=3D0x8086, dev=3D0x2482, revid=3D0x02
=09bus=3D0, slot=3D29, func=3D0
=09class=3D0c-03-00, hdrtype=3D0x00, mfdev=3D1
=09cmdreg=3D0x0005, statreg=3D0x0280, cachelnsz=3D0 (dwords)
=09lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
=09intpin=3Da, irq=3D11
=09map[20]: type 4, range 32, base 00001820, size 5, enabled
found->=09vendor=3D0x8086, dev=3D0x2484, revid=3D0x02
=09bus=3D0, slot=3D29, func=3D1
=09class=3D0c-03-00, hdrtype=3D0x00, mfdev=3D0
=09cmdreg=3D0x0005, statreg=3D0x0280, cachelnsz=3D0 (dwords)
=09lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
=09intpin=3Db, irq=3D11
=09map[20]: type 4, range 32, base 00001840, size 5, enabled
found->=09vendor=3D0x8086, dev=3D0x2487, revid=3D0x02
=09bus=3D0, slot=3D29, func=3D2
=09class=3D0c-03-00, hdrtype=3D0x00, mfdev=3D0
=09cmdreg=3D0x0001, statreg=3D0x0280, cachelnsz=3D0 (dwords)
=09lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
=09intpin=3Dc, irq=3D11
found->=09vendor=3D0x8086, dev=3D0x2448, revid=3D0x42
=09bus=3D0, slot=3D30, func=3D0
=09class=3D06-04-00, hdrtype=3D0x01, mfdev=3D0
=09cmdreg=3D0x0107, statreg=3D0x0080, cachelnsz=3D0 (dwords)
=09lattimer=3D0x00 (0 ns), mingnt=3D0x04 (1000 ns), maxlat=3D0x00 (0 ns)
found->=09vendor=3D0x8086, dev=3D0x248c, revid=3D0x02
=09bus=3D0, slot=3D31, func=3D0
=09class=3D06-01-00, hdrtype=3D0x00, mfdev=3D1
=09cmdreg=3D0x000f, statreg=3D0x0280, cachelnsz=3D0 (dwords)
=09lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
=09map[10]: type 4, range 32, base 000001f0, size 3, enabled
=09map[14]: type 4, range 32, base 000003f4, size 2, enabled
=09map[18]: type 4, range 32, base 00000170, size 3, enabled
=09map[1c]: type 4, range 32, base 00000374, size 2, enabled
=09map[20]: type 4, range 32, base 00001860, size 4, enabled
found->=09vendor=3D0x8086, dev=3D0x248a, revid=3D0x02
=09bus=3D0, slot=3D31, func=3D1
=09class=3D01-01-8a, hdrtype=3D0x00, mfdev=3D0
=09cmdreg=3D0x0005, statreg=3D0x0280, cachelnsz=3D0 (dwords)
=09lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
=09intpin=3Da, irq=3D255
=09map[20]: type 4, range 32, base 00001880, size 5, enabled
found->=09vendor=3D0x8086, dev=3D0x2483, revid=3D0x02
=09bus=3D0, slot=3D31, func=3D3
=09class=3D0c-05-00, hdrtype=3D0x00, mfdev=3D0
=09cmdreg=3D0x0001, statreg=3D0x0280, cachelnsz=3D0 (dwords)
=09lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
=09intpin=3Db, irq=3D11
=09map[10]: type 4, range 32, base 00001c00, size 8, port=
disabled
=09map[14]: type 4, range 32, base 000018c0, size 6, enabled
found->=09vendor=3D0x8086, dev=3D0x2485, revid=3D0x02
=09bus=3D0, slot=3D31, func=3D5
=09class=3D04-01-00, hdrtype=3D0x00, mfdev=3D0
=09cmdreg=3D0x0000, statreg=3D0x0280, cachelnsz=3D0 (dwords)
=09lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
=09intpin=3Db, irq=3D11
=09map[10]: type 4, range 32, base 00002400, size 8, port=
disabled
=09map[14]: type 4, range 32, base 00002000, size 7, enabled
found->=09vendor=3D0x8086, dev=3D0x2486, revid=3D0x02
=09bus=3D0, slot=3D31, func=3D6
=09class=3D07-03-00, hdrtype=3D0x00, mfdev=3D0
=09cmdreg=3D0x0000, statreg=3D0x0280, cachelnsz=3D0 (dwords)
=09lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
=09intpin=3Db, irq=3D11
agp0: <Intel 82830 host to AGP bridge> mem 0xd0000000-0xdfffffff=
at device 0.0 on pci0
agp0: allocating GATT for aperture of size 228M
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0xf000-0xfff
pcib1: memory decode 0xc0100000-0xc01fffff
pcib1: prefetched decode 0xe0000000-0xebffffff
---- initial configuration ------------------------
\\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11]=
low,level,sharable 1.0.0
\\_SB_.LNKB irq 11: [ 3 4 5 6 7 9 10 11]=
low,level,sharable 1.0.1
---- before setting priority for links ------------
---- before fixup boot-disabled links -------------
---- after fixup boot-disabled links --------------
---- arbitrated configuration ---------------------
\\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11]=
low,level,sharable 1.0.0
\\_SB_.LNKB irq 11: [ 3 4 5 6 7 9 10 11]=
low,level,sharable 1.0.1
pci1: <ACPI PCI bus> on pcib1
pci1: physical bus=3D1
=09map[10]: type 1, range 32, base c0100000, size 19, enabled
=09map[14]: type 3, range 32, base e8000000, size 26, enabled
=09map[18]: type 3, range 32, base e4000000, size 26, enabled
=09map[1c]: type 3, range 32, base e0000000, size 25, enabled
found->=09vendor=3D0x5333, dev=3D0x8c2e, revid=3D0x05
=09bus=3D1, slot=3D0, func=3D0
=09class=3D03-00-00, hdrtype=3D0x00, mfdev=3D0
=09cmdreg=3D0x0007, statreg=3D0x0230, cachelnsz=3D8 (dwords)
=09lattimer=3D0x40 (1920 ns), mingnt=3D0x04 (1000 ns), maxlat=3D0xff=
(63750 ns)
=09intpin=3Da, irq=3D11
=09powerspec 2 supports D0 D1 D2 D3 current D0
pci1: <display, VGA> at device 0.0 (no driver attached)
uhci0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> port=
0x1800-0x181f irq 11 at device 29.0 on pci0
usb0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> port=
0x1820-0x183f irq 11 at device 29.1 on pci0
usb1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ums0: IBM Corporation product 0x3107, rev 1.10/5.00, addr 2,=
iclass 3/1
ums0: 3 buttons and Z dir.
uhci2: <Intel 82801CA/CAM (ICH3) USB controller USB-C> port=
0x1840-0x185f irq 11 at device 29.2 on pci0
usb2: <Intel 82801CA/CAM (ICH3) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pcib2: secondary bus 2
pcib2: subordinate bus 8
pcib2: I/O decode 0x3000-0x7fff
pcib2: memory decode 0xc0200000-0xcfffffff
pcib2: prefetched decode 0xec000000-0xf7ffffff
---- initial configuration ------------------------
\\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11]=
low,level,sharable 2.0.0
\\_SB_.LNKB irq 11: [ 3 4 5 6 7 9 10 11]=
low,level,sharable 2.0.1
\\_SB_.LNKC irq 11: [ 3 4 5 6 7 9 10 11]=
low,level,sharable 2.0.2
\\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11]=
low,level,sharable 2.1.0
\\_SB_.LNKC irq 11: [ 3 4 5 6 7 9 10 11]=
low,level,sharable 2.2.0
\\_SB_.LNKD irq 11: [ 3 4 5 6 7 9 10 11]=
low,level,sharable 2.2.1
\\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11]=
low,level,sharable 2.2.2
\\_SB_.LNKB irq 11: [ 3 4 5 6 7 9 10 11]=
low,level,sharable 2.2.3
\\_SB_.LNKC irq 11: [ 3 4 5 6 7 9 10 11]=
low,level,sharable 2.4.0
\\_SB_.LNKD irq 11: [ 3 4 5 6 7 9 10 11]=
low,level,sharable 2.4.1
\\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11]=
low,level,sharable 2.4.2
\\_SB_.LNKB irq 11: [ 3 4 5 6 7 9 10 11]=
low,level,sharable 2.4.3
\\_SB_.LNKE irq 11: [ 3 4 5 6 7 9 10 11]=
low,level,sharable 2.8.0
---- before setting priority for links ------------
---- before fixup boot-disabled links -------------
---- after fixup boot-disabled links --------------
---- arbitrated configuration ---------------------
\\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11]=
low,level,sharable 2.0.0
\\_SB_.LNKB irq 11: [ 3 4 5 6 7 9 10 11]=
low,level,sharable 2.0.1
\\_SB_.LNKC irq 11: [ 3 4 5 6 7 9 10 11]=
low,level,sharable 2.0.2
\\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11]=
low,level,sharable 2.1.0
\\_SB_.LNKC irq 11: [ 3 4 5 6 7 9 10 11]=
low,level,sharable 2.2.0
\\_SB_.LNKD irq 11: [ 3 4 5 6 7 9 10 11]=
low,level,sharable 2.2.1
\\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11]=
low,level,sharable 2.2.2
\\_SB_.LNKB irq 11: [ 3 4 5 6 7 9 10 11]=
low,level,sharable 2.2.3
\\_SB_.LNKC irq 11: [ 3 4 5 6 7 9 10 11]=
low,level,sharable 2.4.0
\\_SB_.LNKD irq 11: [ 3 4 5 6 7 9 10 11]=
low,level,sharable 2.4.1
\\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11]=
low,level,sharable 2.4.2
\\_SB_.LNKB irq 11: [ 3 4 5 6 7 9 10 11]=
low,level,sharable 2.4.3
\\_SB_.LNKE irq 11: [ 3 4 5 6 7 9 10 11]=
low,level,sharable 2.8.0
pci2: <ACPI PCI bus> on pcib2
pci2: physical bus=3D2
=09map[10]: type 1, range 32, base 50000000, size 12, enabled
found->=09vendor=3D0x104c, dev=3D0xac51, revid=3D0x00
=09bus=3D2, slot=3D0, func=3D0
=09class=3D06-07-00, hdrtype=3D0x02, mfdev=3D1
=09cmdreg=3D0x0107, statreg=3D0x0210, cachelnsz=3D8 (dwords)
=09lattimer=3D0x40 (1920 ns), mingnt=3D0xc0 (48000 ns), maxlat=3D0x03=
(750 ns)
=09intpin=3Da, irq=3D11
=09powerspec 1 supports D0 D1 D2 D3 current D0
=09map[10]: type 1, range 32, base 51000000, size 12, enabled
found->=09vendor=3D0x104c, dev=3D0xac51, revid=3D0x00
=09bus=3D2, slot=3D0, func=3D1
=09class=3D06-07-00, hdrtype=3D0x02, mfdev=3D1
=09cmdreg=3D0x0107, statreg=3D0x0210, cachelnsz=3D8 (dwords)
=09lattimer=3D0x40 (1920 ns), mingnt=3D0xc0 (48000 ns), maxlat=3D0x03=
(750 ns)
=09intpin=3Db, irq=3D11
=09powerspec 1 supports D0 D1 D2 D3 current D0
=09map[10]: type 3, range 32, base ec000000, size 12, enabled
found->=09vendor=3D0x1260, dev=3D0x3873, revid=3D0x01
=09bus=3D2, slot=3D2, func=3D0
=09class=3D02-80-00, hdrtype=3D0x00, mfdev=3D0
=09cmdreg=3D0x0117, statreg=3D0x0290, cachelnsz=3D8 (dwords)
=09lattimer=3D0x40 (1920 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
=09intpin=3Da, irq=3D11
=09powerspec 2 supports D0 D3 current D0
=09map[10]: type 1, range 32, base c0200000, size 12, enabled
=09map[14]: type 4, range 32, base 00007000, size 6, enabled
found->=09vendor=3D0x8086, dev=3D0x1031, revid=3D0x42
=09bus=3D2, slot=3D8, func=3D0
=09class=3D02-00-00, hdrtype=3D0x00, mfdev=3D0
=09cmdreg=3D0x0117, statreg=3D0x0290, cachelnsz=3D8 (dwords)
=09lattimer=3D0x42 (1980 ns), mingnt=3D0x08 (2000 ns), maxlat=3D0x38=
(14000 ns)
=09intpin=3Da, irq=3D11
=09powerspec 2 supports D0 D1 D2 D3 current D0
cbb0: <TI1420 PCI-CardBus Bridge> mem 0x50000000-0x50000fff irq=
11 at device 0.0 on pci2
pcib2: device cbb0 requested unsupported memory range 0x0-0x0=
(decoding 0xc0200000-0xcfffffff, 0xec000000-0xf7ffffff)
pcib2: device cbb0 requested decoded memory range=
0xc0200000-0xcfffffff
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
cbb1: <TI1420 PCI-CardBus Bridge> mem 0x51000000-0x51000fff irq=
11 at device 0.1 on pci2
pcib2: device cbb1 requested unsupported memory range 0x0-0x0=
(decoding 0xc0200000-0xcfffffff, 0xec000000-0xf7ffffff)
pcib2: device cbb1 requested decoded memory range=
0xc0200000-0xcfffffff
cardbus1: <CardBus bus> on cbb1
pccard1: <16-bit PCCard bus> on cbb1
wi0: <Intersil Prism2.5> mem 0xec000000-0xec000fff irq 11 at=
device 2.0 on pci2
pcib2: device wi0 requested decoded memory range=
0xec000000-0xec000fff
wi0: 802.11 address: 00:20:e0:8b:c0:c6
wi0: using RF:PRISM2.5 MAC:ISL3874A(Mini-PCI)
wi0: Intersil Firmware: Primary (1.0.7), Station (1.3.6)
wi0: supported rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
wi0: bpf attached
wi0: bpf attached
fxp0: <Intel 82801CAM (ICH3) Pro/100 VE Ethernet> port=
0x7000-0x703f mem 0xc0200000-0xc0200fff irq 11 at device 8.0 on=
pci2
pcib2: device fxp0 requested decoded memory range=
0xc0200000-0xc0200fff
pcib2: device fxp0 requested decoded I/O range 0x7000-0x703f
fxp0: using I/O space register mapping
fxp0: Ethernet address 00:d0:59:be:58:59
fxp0: PCI IDs: 8086 1031 1014 0209 0042
fxp0: Dynamic Standby mode is disabled
miibus0: <MII bus> on fxp0
inphy0: <i82562ET 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: bpf attached
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH3 UDMA100 controller> port=
0x1860-0x186f,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 at=
device 31.1 on pci0
ata0: pre reset mask=3D03 ostat0=3D50 ostat2=3D00
ata0-master: ATAPI 00 00
ata0-slave: ATAPI 00 00
ata0: after reset mask=3D03 stat0=3D50 stat1=3D00
ata0-master: ATA 01 a5
ata0: devices=3D01
ata0: at 0x1f0 irq 14 on atapci0
ata1: pre reset mask=3D03 ostat0=3D50 ostat2=3D00
ata1-master: ATAPI 00 00
ata1-slave: ATAPI 00 00
ata1: after reset mask=3D03 stat0=3D50 stat1=3D00
ata1-master: ATA 01 a5
ata1: devices=3D01
ata1: at 0x170 irq 15 on atapci0
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
pci0: <multimedia, audio> at device 31.5 (no driver attached)
pci0: <simple comms> at device 31.6 (no driver attached)
unknown: not probed (disabled)
unknown: not probed (disabled)
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on=
acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x54ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
psm0: unable to allocate IRQ
psmcpnp0 irq 12 on acpi0
psm0: current command byte:0047
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons
psm0: config:00000000, flags:00000000, packet size:3
psm0: syncmask:c0, syncbits:00
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)>=
port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0: irq maps: 0x1 0x11 0x1 0x1
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
ppc0: using extended I/O port range
ppc0: SPP
ppc0 port 0x3bc-0x3c3 irq 7 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lp0: bpf attached
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
unknown: not probed (disabled)
sio1: irq maps: 0x41 0x49 0x41 0x41
sio1 port 0x2f8-0x2ff irq 3 drq 3 on acpi0
sio1: type 16550A
acpi_ec0: <embedded controller> port 0x66,0x62 on acpi0
unknown: not probed (disabled)
acpi_cmbat0: <Control method Battery> on acpi0
acpi_cmbat1: <Control method Battery> on acpi0
acpi_acad0: <AC adapter> on acpi0
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
fdc: fdc0 already exists; skipping it
ppc: ppc0 already exists; skipping it
sio: sio0 already exists; skipping it
sio: sio1 already exists; skipping it
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
ex_isa_identify()
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROMs> at iomem=
0xe0000-0xeffff,0xdc000-0xdffff,0xcf000-0xcffff,0xce000-0xcefff,=
0xc0000-0xcdfff on isa0
pmtimer0 on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fe0: not probed (disabled)
ie0: not probed (disabled)
le0: not probed (disabled)
lnc0: not probed (disabled)
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic1: not probed (disabled)
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=3D0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff=
on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 07 80 9c 0e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 0e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 0e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
Device configuration finished.
procfs registered
Timecounters tick every 10.000 msec
lo0: bpf attached
acpi_cmbat0: battery initialization start
acpi_cmbat1: battery initialization start
acpi_acad0: acline initialization start
cbb0: Unsupported card type detected
system power profile changed to 'economy'
acpi_acad0: Off Line
ad0: success setting UDMA100 on Intel ICH3 chip
ad0: <IC25N040ATCS05-0/CS4OA61A> ATA-5 disk at ata0-master
ad0: 38154MB (78140160 sectors), 77520 C, 16 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, UDMA100
ad0: piomode=3D12 dmamode=3D34 udmamode=3D69 cblid=3D1
GEOM: new disk ad0
ar: FreeBSD check1 failed
ad2: success setting UDMA100 on Intel ICH3 chip
ad2: <IC25T060ATCS05-0/CA8OA71A> ATA-5 disk at ata1-master
ad2: 57231MB (117210240 sectors), 116280 C, 16 H, 63 S, 512 B
ad2: 16 secs/int, 1 depth queue, UDMA100
ad2: piomode=3D12 dmamode=3D34 udmamode=3D69 cblid=3D1
acpi_ec0: EcRead: Failed waiting for EC to send data.
ACPI-0432: *** Error: Handler for [EmbeddedControl] returned=
AE_ERROR
ACPI-1287: *** Error: Method execution failed=
[\\_SB_.PCI0.LPC_.EC__.BAT0._STA] (Node 0xc4077260), AE_ERROR
ACPI-0175: *** Error: Method execution failed=
[\\_SB_.PCI0.LPC_.EC__.BAT0._STA] (Node 0xc4077260), AE_ERROR
acpi_ec0: EcRead: Failed waiting for EC to send data.
ACPI-0432: *** Error: Handler for [EmbeddedControl] returned=
AE_ERROR
ACPI-1287: *** Error: Method execution failed=
[\\_SB_.PCI0.LPC_.EC__.BAT1._STA] (Node 0xc407b160), AE_ERROR
ACPI-0175: *** Error: Method execution failed=
[\\_SB_.PCI0.LPC_.EC__.BAT1._STA] (Node 0xc407b160), AE_ERROR
acpi_ec0: EcRead: Failed waiting for EC to send data.
ACPI-0432: *** Error: Handler for [EmbeddedControl] returned=
AE_ERROR
ACPI-1287: *** Error: Method execution failed=
[\\_SB_.PCI0.LPC_.EC__.BAT1._BST] (Node 0xc407b120), AE_ERROR
acpi_cmbat1: error fetching current battery status -- AE_ERROR
acpi_ec0: EcRead: Failed waiting for EC to send data.
ACPI-0432: *** Error: Handler for [EmbeddedControl] returned=
AE_ERROR
ACPI-1287: *** Error: Method execution failed=
[\\_SB_.PCI0.LPC_.EC__.BAT1._BIF] (Node 0xc407b140), AE_ERROR
acpi_cmbat1: error fetching current battery info -- AE_ERROR
acpi_ec0: EcWaitEventIntr called without EC lock!
acpi_cmbat0: battery initialization done, tried 1 times
ar: FreeBSD check1 failed
[0] f:00 typ:12 s(CHS):0/1/1 e(CHS):1023/89/63 s:63 l:21500577
[1] f:80 typ:165 s(CHS):1023/255/63 e(CHS):1023/254/63 s:21500640=
l:20461140
[2] f:00 typ:131 s(CHS):1023/255/63 e(CHS):1023/29/63 s:41973120=
l:34080480
[3] f:00 typ:28 s(CHS):1023/255/63 e(CHS):1023/14/63 s:76053600=
l:2071440
GEOM: Configure ad0s1, start 32256 length 11008295424 end=
11008327679
GEOM: Configure ad0s2, start 11008327680 length 10476103680 end=
21484431359
GEOM: Configure ad0s3, start 21490237440 length 17449205760 end=
38939443199
GEOM: Configure ad0s4, start 38939443200 length 1060577280 end=
40000020479
GEOM: new disk ad2
GEOM: Configure ad0s2a, start 0 length 838860800 end 838860799
GEOM: Configure ad0s2b, start 838860800 length 536870912 end=
1375731711
GEOM: Configure ad0s2c, start 0 length 10476103680 end=
10476103679
GEOM: Configure ad0s2d, start 1375731712 length 524288000 end=
1900019711
GEOM: Configure ad0s2e, start 1900019712 length 536870912 end=
2436890623
GEOM: Configure ad0s2f, start 2436890624 length 8039213056 end=
10476103679
[0] f:80 typ:12 s(CHS):0/1/1 e(CHS):1023/239/63 s:63 l:16798257
[1] f:00 typ:12 s(CHS):1023/239/63 e(CHS):1023/239/63 s:16798320=
l:22528800
[2] f:00 typ:28 s(CHS):1023/239/63 e(CHS):1023/239/63 s:39327120=
l:2056320
[3] f:00 typ:15 s(CHS):1023/239/63 e(CHS):1023/239/63 s:41383440=
l:75826800
GEOM: Configure ad2s1, start 32256 length 8600707584 end=
8600739839
GEOM: Configure ad2s2, start 8600739840 length 11534745600 end=
20135485439
GEOM: Configure ad2s3, start 20135485440 length 1052835840 end=
21188321279
GEOM: Configure ad2s4, start 21188321280 length 38823321600 end=
60011642879
MBREXT Slice 5 on ad2s4:
[0] f:00 typ:131 s(CHS):1023/239/63 e(CHS):1023/239/63 s:63=
l:16390017
[1] f:00 typ:5 s(CHS):1023/239/63 e(CHS):1023/239/63 s:16390080=
l:16390080
GEOM: Configure ad2s5, start 32256 length 8391688704 end=
8391720959
MBREXT Slice 6 on ad2s4:
[0] f:00 typ:131 s(CHS):1023/239/63 e(CHS):1023/239/63 s:63=
l:16390017
[1] f:00 typ:5 s(CHS):1023/239/63 e(CHS):1023/239/63 s:32780160=
l:1058400
GEOM: Configure ad2s6, start 8391753216 length 8391688704 end=
16783441919
MBREXT Slice 7 on ad2s4:
[0] f:00 typ:130 s(CHS):1023/239/63 e(CHS):1023/239/63 s:63=
l:1058337
[1] f:00 typ:5 s(CHS):1023/239/63 e(CHS):1023/239/63 s:33838560=
l:16390080
GEOM: Configure ad2s7, start 16783474176 length 541868544 end=
17325342719
MBREXT Slice 8 on ad2s4:
[0] f:00 typ:11 s(CHS):1023/239/63 e(CHS):1023/239/63 s:63=
l:16390017
[1] f:00 typ:5 s(CHS):1023/239/63 e(CHS):1023/239/63 s:50228640=
l:25598160
GEOM: Configure ad2s8, start 17325374976 length 8391688704 end=
25717063679
MBREXT Slice 9 on ad2s4:
[0] f:00 typ:11 s(CHS):1023/239/63 e(CHS):1023/239/63 s:63=
l:25598097
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad2s9, start 25717095936 length 13106225664 end=
38823321599
Mounting root from ufs:/dev/ad0s2a
start_init: trying /sbin/init
system power profile changed to 'performance'
acpi_acad0: On Line
splash: image decoder found: daemon_saver
Linux ELF exec handler installed
acpi_acad0: acline initialization done, tried 2 times
fxp0: device timeout
acpi_cmbat1: battery initialization failed, giving up
fxp0: device timeout
fxp0: device timeout
fxp0: device timeout
fxp0: device timeout
fxp0: device timeout
fxp0: device timeout
fxp0: device timeout
fxp0: device timeout
fxp0: device timeout
fxp0: device timeout
fxp0: device timeout
fxp0: device timeout
fxp0: device timeout
fxp0: device timeout
fxp0: device timeout
fxp0: device timeout
fxp0: device timeout
=09=09=09=09
=A1=A1=A1=A1=A1=A1=A1=A1=A1=A1=A1=A1=A1=A1=A1=A1zongliang li
=A1=A1=A1=A1=A1=A1=A1=A1=A1=A1=A1=A1=A1=A1=A1=A1lizl@ict.ac.cn
=A1=A1=A1=A1=A1=A1=A1=A1=A1=A1=A1=A1=A1=A1=A1=A1=A1=A1=A1=A12003-06-13