[ltp] MWavem Not Working after Intialize

[iriXx]

argh. im having this too. still cant figure it out.
m~

Brandon Philips wrote:
> I was having some problems with the modem connecting in Linux (works fine in
> WinXP, was opening port OK and I could hear dial tone in Linux but not
> connecting to ISP) so I used the BIOS intialize to clear out the settings.
> Then I went to back into windows and used a PS2 IMODEM Enable command which
> set the modem up for:
> IRQ 10, 3
> DMA 7
> PORT 02f8
> DSP 130
> 
> I then booted my custom 2.4.18 kernel with mwave compiled into the kernel
> and it was complaining that the smapi_query calls were returning 0 for the
> DMA (I think) and the IRQ... I thought that was strange so I went back into
> windows and checked the settings, and everything looked ok.  But I still
> couldn't get it to work in Linux... what am I doing wrong?
> 
> -Brandon Philips
> 


-- 
iriXx
www.iriXx.org

_
( )  ascii ribbon against html email
  X
/ \    cat /dev/sda1 > /dev/dsp


   *** stopping make sense ***