[ltp] Dual-headed R40?

[Mark Carroll]

On Thu, 13 Nov 2003, Vivek wrote:

> Looks like the monitor detection stuff is getting confused. I'll nose
> around in my xfree source tree and see if I can figure out what it is
> doing.

Cool, thanks! FWIW, when it does work - when the CRT is connected after
boot - I only get that Manufacturer: CTX for screen 1, and screen 0
instead gets the intriguing:

(II) LoadModule: "ddc"
(II) Reloading /usr/X11R6/lib/modules/libddc.a
(II) RADEON(0): VESA VBE DDC supported
(II) RADEON(0): VESA VBE DDC Level none
(II) RADEON(0): VESA VBE DDC transfer in appr. 2 sec.
(II) RADEON(0): VESA VBE DDC read failed
(==) RADEON(0): Write-combining range (0xe8000000,0x1000000)
(II) RADEON(0): PLL parameters: rf=2700 rd=60 min=12000 max=35000;
xclk=14400
(==) RADEON(0): Using gamma correction (1.0, 1.0, 1.0)
(--) RADEON(0): Virtual size is 1024x768 (pitch 1040)
(**) RADEON(0): Mode "1024x768"
(==) RADEON(0): DPI set to (75, 75)

...instead of going through all that DDC Monitor info stuff after loading
i2c.

-- Mark