[ltp] Re: At a Standstill with 770

[Jon Flanders]

Duncan,

  I managed to make some progress by putting the pcmf502re.o module in
/lib/modules/2.4.22-10mdk/pcmcia/

However, at boot up modprobe executes pcmf502re.o(actually I have tried
revd and reve), I don't have pcmf502re.o.

The it exits with a 255.

Here is some of the current output of various commands. I have tried
these with and without a modem/ethernet card in slot 0. What might that
Device or resource busy mean with the pcmcia restart?

Jon Flanders

[root@localhost jon]# modprobe \*
[root@localhost jon]# depmod -a
[root@localhost jon]# cardctl status
Socket 0:
  no card
Socket 1:
  5V 16-bit PC Card
  function 0: [ready]


[root@localhost jon]# modprobe yenta_socket;service pcmcia restart
Shutting down PCMCIA services: ds: Device or resource busy
pcmcia_core: Device or resource busy
done.
Starting PCMCIA services: cardmgr[2384]: watching 2 sockets
done.
[root@localhost jon]#


[root@localhost jon]# cardctl status
Socket 0:
  5V 16-bit PC Card
  function 0: [ready], [bat dead], [bat low]
Socket 1:
  5V 16-bit PC Card
  function 0: [ready]
[root@localhost jon]#

[root@localhost jon]# cardctl ident
Socket 0:
  product info: "Xircom", "CreditCard Ethernet 10/100 + Modem 56",
"CEM56", "1.00"
  manfid: 0x0105, 0x110a
  function: 2 (serial)
Socket 1:
  product info: "Belkin", "11Mbps-Wireless-Notebook-Network-Adapter"
  manfid: 0x01bf, 0x3302
  function: 6 (network)
[root@localhost jon]#


root@localhost jon]# modprobe yenta_socket;service pcmcia restart
Shutting down PCMCIA services: ds: Device or resource busy
pcmcia_core: Device or resource busy
done.
Starting PCMCIA services: cardmgr[3174]: watching 2 sockets
done.
[root@localhost jon]#


user function /lib/modules/2.4.22-10mdk/pcmcia
user function /lib/modules/2.4.22-10mdk/pcmcia/pcmf502_revd.o