[ltp] T41p 2373 and ACPI

[obi]

On Tue, Jul 13, 2004 at 10:17:07PM +0200, Fran?ois Fleuret wrote:
> Hi Patrick,
> 
> > So, when I fire the system back up, the backlight goes on and that's
> > about it.  I've had cases where even the backlight didn't want to
> > come back on. In either case, I can type reboot or go the sysrq
> > way. These things work. It's just the display that doesn't come back
> > up.
> 
> I have the standard 2.6.7 from kernel.org (with mad wifi drivers for
> the atheros) on a T41p.
> 
> Suspend S3 works, except that after having came back from suspend,
> under heavy load, I lose the ethernet and USB (mouse). Since I use the
> S3 only when traveling, this is not such a pain.
> 
> The distribution is a Debian sarge.
> 
> You can get my kernel .config and XF86Config on my web page.
> 
> http://diwww.epfl.ch/~fleuret/installations.html#t41p
> 
> Cheers.

On my T41 2378 I had problem loosing USB and e1000 after a
suspend/resume cycle: it got fixed with 2.6.7-mm6. I'm using APM becasue
S3 doesn't last that long (the LED over the ultrabay stays lit while
suspending) but ACPI works well too (at least the few times I tried).

-g

> 
> -- 
> Fran?ois Fleuret                              EPFL - CVLAB/LCN
> --
> The linux-thinkpad mailing list home page is at:
> http://mailman.linux-thinkpad.org/mailman/listinfo/linux-thinkpad
> 

-- 
+-----------------------+--------------------------+
| Graziano Obertelli    | CS Dept. Rm 102          |
| graziano@cs.ucsb.edu  | University of California |
| (805) 893-5212        | Santa Barbara, CA 93106  |
+-----------------------+--------------------------+