[ltp] R40e & Power

[Konstantin G.]

Hello,
I'm using the R40e TP (2,2GHz-Celeron) with the 2. Fedora Core.
I hoped that with the 2.6.5-1=kernel some of the important
powermanagement-features could be used. Unfortunatly the newer kernel
has the same problems.
I just want to be able to check the battery while using the computer!?
Can somebody help me who had same problems with that R40e.
Thanx.
Konstantin

> Linux version 2.6.5-1.358 (bhcompile@bugs.build.redhat.com) (gcc version 3.3.3 20040412 (Red Hat Linux 3.3.3-7)) #1 Sat May 8 09:04:50 EDT 2004
> BIOS-provided physical RAM map:
>  BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
>  BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
>  BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
>  BIOS-e820: 0000000000100000 - 000000000ef70000 (usable)
>  BIOS-e820: 000000000ef70000 - 000000000ef7b000 (ACPI data)
>  BIOS-e820: 000000000ef7b000 - 000000000ef7d000 (ACPI NVS)
>  BIOS-e820: 000000000ef80000 - 000000000f000000 (reserved)
>  BIOS-e820: 000000001ef80000 - 000000001f000000 (reserved)
>  BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
> 0MB HIGHMEM available.
> 239MB LOWMEM available.
> zapping low mappings.
> On node 0 totalpages: 61296
>   DMA zone: 4096 pages, LIFO batch:1
>   Normal zone: 57200 pages, LIFO batch:13
>   HighMem zone: 0 pages, LIFO batch:1
> DMI present.
> IBM machine detected. Enabling interrupts during APM calls.
> IBM machine detected. Disabling SMBus accesses.
> Built 1 zonelists
> Kernel command line: ro root=LABEL=/  rhgb acpi=off
> mapped 4G/4G trampoline to ffff3000.
> Initializing CPU#0
> CPU 0 irqstacks, hard=02345000 soft=02344000
> PID hash table entries: 1024 (order 10: 8192 bytes)
> Detected 2192.617 MHz processor.
> Using tsc for high-res timesource
> Console: colour VGA+ 80x25
> Memory: 239704k/245184k available (1540k kernel code, 4776k reserved, 599k data, 144k init, 0k highmem)
> Calibrating delay loop... 4308.99 BogoMIPS
> Security Scaffold v1.0.0 initialized
> SELinux:  Initializing.
> SELinux:  Starting in permissive mode
> There is already a security framework initialized, register_security failed.
> Failure registering capabilities with the kernel
> selinux_register_security:  Registering secondary module capability
> Capability LSM initialized
> Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
> Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
> Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
> CPU:     After generic identify, caps: bfebf9ff 00000000 00000000 00000000
> CPU:     After vendor identify, caps: bfebf9ff 00000000 00000000 00000000
> CPU: Trace cache: 12K uops, L1 D cache: 8K
> CPU: L2 cache: 256K
> CPU:     After all inits, caps: bfebf1ff 00000000 00000000 00000080
> Intel machine check architecture supported.
> Intel machine check reporting enabled on CPU#0.
> CPU#0: Intel P4/Xeon Extended MCE MSRs (12) available
> CPU: Intel Mobile Intel(R) Celeron(R) CPU 2.20GHz stepping 09
> Enabling fast FPU save and restore... done.
> Enabling unmasked SIMD FPU exception support... done.
> Checking 'hlt' instruction... OK.
> POSIX conformance testing by UNIFIX
> NET: Registered protocol family 16
> PCI: PCI BIOS revision 2.10 entry at 0xfd84c, last bus=4
> PCI: Using configuration type 1
> mtrr: v2.0 (20020519)
> ACPI: Subsystem revision 20040326
> ACPI: Interpreter disabled.
> Linux Plug and Play Support v0.97 (c) Adam Belay
> usbcore: registered new driver usbfs
> usbcore: registered new driver hub
> ACPI: ACPI tables contain no PCI IRQ routing entries
> PCI: Invalid ACPI-PCI IRQ routing table
> PCI: Probing PCI hardware
> PCI: Probing PCI hardware (bus 00)
> PCI: Using ALI IRQ Router
> PCI: Using IRQ router ALI [10b9/1533] at 0000:00:07.0
> apm: BIOS not found.
> audit: initializing netlink socket (disabled)
> audit(1086252148.435:0): initialized
> Total HugeTLB memory allocated, 0
> VFS: Disk quotas dquot_6.5.1
> Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
> SELinux:  Registering netfilter hooks
> Initializing Cryptographic API
> Activating ISA DMA hang workarounds.
> pci_hotplug: PCI Hot Plug PCI Core version: 0.5
> isapnp: Scanning for PnP cards...
> isapnp: No Plug & Play device found
> Real Time Clock Driver v1.12
> Linux agpgart interface v0.100 (c) Dave Jones
> agpgart: Detected Ati IGP330/340/345/350/M chipset
> agpgart: Maximum main memory to use for agp memory: 189M
> agpgart: AGP aperture is 64M @ 0xec000000
> Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled
> PCI: Found IRQ 11 for device 0000:00:03.0
> ttyS0 at I/O 0x8428 (irq = 11) is a 8250
> ttyS1 at I/O 0x8440 (irq = 11) is a 8250
> ttyS2 at I/O 0x8450 (irq = 11) is a 8250
> ttyS3 at I/O 0x8460 (irq = 11) is a 8250
> ttyS4 at I/O 0x8470 (irq = 11) is a 8250
> RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
> divert: not allocating divert_blk for non-ethernet device lo
> Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
> ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
> ALI15X3: IDE controller at PCI slot 0000:00:0f.0
> ALI15X3: chipset revision 196
> ALI15X3: not 100% native mode: will probe irqs later
>     ide0: BM-DMA at 0x8080-0x8087, BIOS settings: hda:DMA, hdb:pio
>     ide1: BM-DMA at 0x8088-0x808f, BIOS settings: hdc:DMA, hdd:pio
> hda: IC25N030ATMR04-0, ATA DISK drive
> Using cfq io scheduler
> ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> hdc: DW-224E, ATAPI CD/DVD-ROM drive
> ide1 at 0x170-0x177,0x376 on irq 15
> hda: max request size: 128KiB
> hda: Host Protected Area detected.
> 	current capacity is 52404021 sectors (26830 MB)
> 	native  capacity is 58605120 sectors (30005 MB)
> hda: 52404021 sectors (26830 MB) w/1740KiB Cache, CHS=55453/15/63, UDMA(100)
>  hda: hda1 hda2 hda3
> hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 1658kB Cache, UDMA(33)
> Uniform CD-ROM driver Revision: 3.20
> hdc: irq timeout: status=0xd0 { Busy }
> hdc: irq timeout: error=0xd0LastFailedSense 0x0d 
> hdc: DMA disabled
> hdc: ATAPI reset complete
> ide-floppy driver 0.99.newide
> usbcore: registered new driver hiddev
> usbcore: registered new driver hid
> drivers/usb/input/hid-core.c: v2.0:USB HID core driver
> mice: PS/2 mouse device common for all mice
> serio: i8042 AUX port at 0x60,0x64 irq 12
> input: PS/2 Generic Mouse on isa0060/serio1
> serio: i8042 KBD port at 0x60,0x64 irq 1
> input: AT Translated Set 2 keyboard on isa0060/serio0
> md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
> NET: Registered protocol family 2
> IP: routing cache hash table of 2048 buckets, 16Kbytes
> TCP: Hash tables configured (established 16384 bind 32768)
> Initializing IPsec netlink socket
> NET: Registered protocol family 1
> NET: Registered protocol family 17
> checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
> Freeing initrd memory: 183k freed
> md: Autodetecting RAID arrays.
> md: autorun ...
> md: ... autorun DONE.
> RAMDISK: Compressed image found at block 0
> VFS: Mounted root (ext2 filesystem).
> kjournald starting.  Commit interval 5 seconds
> EXT3-fs: mounted filesystem with ordered data mode.
> Freeing unused kernel memory: 144k freed
> NET: Registered protocol family 10
> Disabled Privacy Extensions on device 022db720(lo)
> IPv6 over IPv4 tunneling driver
> divert: not allocating divert_blk for non-ethernet device sit0
> ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
> ohci_hcd: block sizes: ed 64 td 64
> PCI: Assigned IRQ 11 for device 0000:00:02.0
> ohci_hcd 0000:00:02.0: OHCI Host Controller
> ohci_hcd 0000:00:02.0: irq 11, pci mem 1183c000
> ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
> hub 1-0:1.0: USB hub found
> hub 1-0:1.0: 2 ports detected
> EXT3 FS on hda2, internal journal
> device-mapper: 4.1.0-ioctl (2003-12-10) initialised: dm@uk.sistina.com
> Adding 491392k swap on /dev/hda3.  Priority:-1 extents:1
> kjournald starting.  Commit interval 5 seconds
> EXT3 FS on hda1, internal journal
> EXT3-fs: mounted filesystem with ordered data mode.