[ltp] More on Adaptec Duo-Connect Card

[James McKenzie]

Listers:

Here is more on the problems with the Adaptec Duo-Connect (AUA-1411) 
card and is output for this card when I ran dmesg:

PCI: Found IRQ 9 for device 00:02.1
Yenta IRQ list 0cb8, PCI irq9
Socket status: 30000006
Yenta IRQ list 0cb8, PCI irq9
Socket status: 30000020  (Socket where card is)
cs: cb_alloc(bus 5): vendor 0x104c, device 0x8024
PCI: Enabling device 05:00.0 (0000 -> 0002)
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
ohci1394: $Rev: 693 $ Ben Collins <bcollins@debian.org>
ohci1394_0: OHCI-1394 1.1 (PCI): IRQ=[9]  MMIO=[18c00000-18c007ff]  Max 
Packet=[2048]
ieee1394: SelfID completion called outside of bus reset!
usb-uhci.c: $Revision: 1.275 $ time 18:11:21 Apr 13 2004
usb-uhci.c: High bandwidth mode enabled
PCI: Found IRQ 9 for device 00:07.2
usb-uhci.c: USB UHCI at I/O 0x1c20, IRQ 9
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
ieee1394: Host added: Node[00:1023]  GUID[0800285602001639]  [Linux 
OHCI-1394]
usb.c: registered new driver hiddev
usb.c: registered new driver hid
hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech@suse.cz>
hid-core.c: USB HID support drivers
mice: PS/2 mouse device common for all mice
hub.c: new USB device 00:07.2-1, assigned address 2  (hub in Duo card)
usb.c: USB device 2 (vend/prod 0x4e8/0x6601) is not claimed by any 
active driver.
usb-uhci.c: ENXIO 80000280, flags 0, urb d778ba00, burb d778bb00
usbdevfs: USBDEVFS_CONTROL failed dev 2 rqt 128 rq 6 len 67 ret -6
usb-uhci.c: ENXIO 80000280, flags 0, urb d778ba00, burb d778bb00
usbdevfs: USBDEVFS_CONTROL failed dev 2 rqt 128 rq 6 len 18 ret -6

Maybe this will help so that I can get this device running as I really 
would like to use USB2 vice USB 1.1 with my external hard drive and 
several USB 'thumb' drives.

Any help would be appreciated.

James McKenzie