[ltp] Enabling DMA for T41?
Rich Smrcina
linux-thinkpad@linux-thinkpad.org
Tue, 22 Jun 2004 16:08:39 -0500
Back when I was on RedHat 9, I had to get a new kernel RPM from RH to be
able to do this. I run SuSE 9 now and don't have any problem.
On Tue, 2004-06-22 at 15:48, Yip Wai Peng wrote:
> Hi,
> I would like to know whether anybody has enabled DMA for T41 yet. I can't
> seems to do it.
>
> root # hdparm -d1 /dev/hda
>
> /dev/hda:
> setting using_dma to 1 (on)
> HDIO_SET_DMA failed: Operation not permitted
> using_dma = 0 (off)
>
> kernal is already
> CONFIG_BLK_DEV_IDEDMA=y
> CONFIG_IDEDMA_AUTO=y
>
> HD info are as follows
> root # hdparm -i /dev/hda
>
> /dev/hda:
>
> Model=FUJITSU MHT2040AH, FwRev=006C, SerialNo=NP0JT4527113
> Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs }
> RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=4
> BuffType=DualPortCache, BuffSize=8192kB, MaxMultSect=16, MultSect=16
> CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=71123954
> IORDY=yes, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120}
> PIO modes: pio0 pio1 pio2 pio3 pio4
> DMA modes: mdma0 mdma1 mdma2
> UDMA modes: udma0 udma1 udma2 udma3 udma4 *udma5
> AdvancedPM=yes: mode=0x80 (128) WriteCache=enabled
> Drive conforms to: ATA/ATAPI-6 T13 1410D revision 3a:
>
> I would like to know whether anybody has gotten a working configuration, and
> can you post the results of hdparm -Tt /dev/hda as compared to mine?
>
> /dev/hda:
> Timing buffer-cache reads: 1780 MB in 2.00 seconds = 888.36 MB/sec
> Timing buffered disk reads: 22 MB in 3.14 seconds = 7.02 MB/sec
>
> Thanks,
> Waipeng
--
Rich Smrcina
illustro Systems International
rsmrcina at illustro.com
Catch the WAVV!
Update your zSeries skills in 4 days.
WAVV 2005 in Colorado Springs, CO
May 20-24, 2005
For details see http://www.wavv.org