[ltp] Cisco Aironet wireless mini pci card w/ Mandrake 10 and linux kernel 2.6.7

Shaw Vrana linux-thinkpad@linux-thinkpad.org
Thu, 24 Jun 2004 21:44:42 -0700


Hello All,

I'm having some problems getting the aironet wireless mini pci card to work=
=20
with the 2.6.7 kernel in my ThinkPad T30 and would appreciate a point in th=
e=20
right direction.  The airo driver is successfully loaded at boot time but t=
he=20
wifi0 interface is unable to be brought up.

=46rom /var/log/messages directly after boot:

kron kernel: airo:  Probing for PCI adapters
kron kernel: PCI: Found IRQ 11 for device 0000:02:02.0
kron kernel: PCI: Sharing IRQ 11 with 0000:00:1d.2
kron kernel: PCI: Sharing IRQ 11 with 0000:00:1f.1
kron kernel: airo: MAC enabled eth1 0:2:8a:fc:f1:3f
kron kernel: airo:  Finished probing for PCI adapters
kron kernel: airo: BAP setup error too many retries
kron last message repeated 7 times
=2E..
kron dhclient: wifi0: unknown hardware address type 801
kron dhclient: DHCPDISCOVER on wifi0 to 255.255.255.255 port 67
kron dhclient: DHCPDISCOVER on wifi0 to 255.255.255.255 port 67
kron dhclient: DHCPDISCOVER on wifi0 to 255.255.255.255 port 67
kron dhclient: DHCPDISCOVER on wifi0 to 255.255.255.255 port 67
kron dhclient: No DHCPOFFERS received.
kron zcip[1480]: libnet_open_link_interface("wifi0"): unknown physical laye=
r=20
type 0x321
kron ifup:  failed.
kron network: Bringing up interface wifi0:  failed

(this works just fine for eth0..)

=46rom  /proc/driver/aironet/eth1/Status :
Driver Version: airoDevice: 350 Series
Manufacturer: Cisco Systems
=46irmware Version: 5.20.17

I have been unable to change the SSID by echoing a string to SSID or Config=
=2E.?

Any information that you could provide would be greatly appreciated!

Thanks,
Shaw