[ltp] Trouble with USB-Memory
Bertrand Njipwo Kouatchet
linux-thinkpad@linux-thinkpad.org
Thu, 18 Nov 2004 20:40:11 +0100 (MET)
Hello,
ich have some Problem when tring to mount my usb-stick.
For 1 week i use a friends memory.its work well with the command:
mount -t vfat /dev/sda /mnt
I have buy my one usb-memory and i can use it.The mount commando
give following output:
ThinkPad:/home/bertrand/TODO# mount -t vfat /dev/sda /mnt/
mount: wrong fs type, bad option, bad superblock on /dev/sda,
or too many mounted file systems
hier ist the output of the dmesg-commando it seems to be somethink wrong
with the usb-Device:
#################################################################################################
################################################################################################
ThinkPad:/home/bertrand/TODO# dmesg
p2 p3 < p5 p6 >
hdc: MATSHITADVD-RAM UJ-811, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Adding 136008k swap on /dev/hda5. Priority:-1 extents:1
EXT3 FS on hda6, internal journal
Real Time Clock Driver v1.12
hdc: ATAPI 12X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
Capability LSM initialized
input: PC Speaker
Synaptics Touchpad, model: 1
Firmware: 5.9
Sensor: 44
new absolute packet format
Touchpad has extended capability bits
-> multifinger detection
-> palm detection
-> pass-through port
input: SynPS/2 Synaptics TouchPad on isa0060/serio1
serio: Synaptics pass-through port at isa0060/serio1/input0
mice: PS/2 mouse device common for all mice
ts: Compaq touchscreen protocol output
input: PS/2 Generic Mouse on synaptics-pt/serio0
irda_init()
NET: Registered protocol family 23
inserting floppy driver for 2.6.8-1-686
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
parport: PnPBIOS parport detected.
parport0: PC-style at 0x3bc, irq 7 [PCSPP,TRISTATE]
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected an Intel 855PM Chipset.
agpgart: Maximum main memory to use for agp memory: 439M
agpgart: AGP aperture is 256M @ 0xd0000000
cpci_hotplug: CompactPCI Hot Plug Core version: 0.2
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: acpi_pciehprm:\_SB_.PCI0.PCI1 _HPP fail=0x5
pciehp: acpi_pciehprm:\_SB_.PCI0.PCI1 OSHP fails=0x5
pciehp: acpi_pciehprm: Slot sun(1) at s:b:d:f=0x00:02:00:00
pciehp: acpi_pciehprm:\_SB_.PCI0.PCI1 _HPP fail=0x5
pciehp: acpi_pciehprm:\_SB_.PCI0.PCI1 OSHP fails=0x5
pciehp: acpi_pciehprm: Slot sun(2) at s:b:d:f=0x00:02:00:01
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
shpchp: acpi_shpchprm:\_SB_.PCI0.PCI1 _HPP fail=0x5
shpchp: acpi_pciehprm:\_SB_.PCI0.PCI1 OSHP fails=0x5
shpchp: acpi_shpchprm: Slot sun(1) at s:b:d:f=0x00:02:00:00
shpchp: acpi_shpchprm:\_SB_.PCI0.PCI1 _HPP fail=0x5
shpchp: acpi_pciehprm:\_SB_.PCI0.PCI1 OSHP fails=0x5
shpchp: acpi_shpchprm: Slot sun(2) at s:b:d:f=0x00:02:00:01
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
usbcore: registered new driver usbfs
usbcore: registered new driver hub
USB Universal Host Controller Interface driver v2.2
ACPI: PCI interrupt 0000:00:1d.0[A] -> GSI 11 (level, low) -> IRQ 11
Real Time Clock Driver v1.12
hdc: ATAPI 12X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
Capability LSM initialized
input: PC Speaker
Synaptics Touchpad, model: 1
Firmware: 5.9
Sensor: 44
new absolute packet format
Touchpad has extended capability bits
-> multifinger detection
-> palm detection
-> pass-through port
input: SynPS/2 Synaptics TouchPad on isa0060/serio1
serio: Synaptics pass-through port at isa0060/serio1/input0
mice: PS/2 mouse device common for all mice
ts: Compaq touchscreen protocol output
input: PS/2 Generic Mouse on synaptics-pt/serio0
irda_init()
NET: Registered protocol family 23
inserting floppy driver for 2.6.8-1-686
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
parport: PnPBIOS parport detected.
parport0: PC-style at 0x3bc, irq 7 [PCSPP,TRISTATE]
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected an Intel 855PM Chipset.
agpgart: Maximum main memory to use for agp memory: 439M
agpgart: AGP aperture is 256M @ 0xd0000000
cpci_hotplug: CompactPCI Hot Plug Core version: 0.2
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: acpi_pciehprm:\_SB_.PCI0.PCI1 _HPP fail=0x5
pciehp: acpi_pciehprm:\_SB_.PCI0.PCI1 OSHP fails=0x5
pciehp: acpi_pciehprm: Slot sun(1) at s:b:d:f=0x00:02:00:00
pciehp: acpi_pciehprm:\_SB_.PCI0.PCI1 _HPP fail=0x5
pciehp: acpi_pciehprm:\_SB_.PCI0.PCI1 OSHP fails=0x5
pciehp: acpi_pciehprm: Slot sun(2) at s:b:d:f=0x00:02:00:01
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
shpchp: acpi_shpchprm:\_SB_.PCI0.PCI1 _HPP fail=0x5
shpchp: acpi_pciehprm:\_SB_.PCI0.PCI1 OSHP fails=0x5
shpchp: acpi_shpchprm: Slot sun(1) at s:b:d:f=0x00:02:00:00
shpchp: acpi_shpchprm:\_SB_.PCI0.PCI1 _HPP fail=0x5
shpchp: acpi_pciehprm:\_SB_.PCI0.PCI1 OSHP fails=0x5
shpchp: acpi_shpchprm: Slot sun(2) at s:b:d:f=0x00:02:00:01
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
usbcore: registered new driver usbfs
usbcore: registered new driver hub
USB Universal Host Controller Interface driver v2.2
ACPI: PCI interrupt 0000:00:1d.0[A] -> GSI 11 (level, low) -> IRQ 11
Buffer I/O error on device sda, logical block 0
unable to read partition table
/dev/scsi/host0/bus0/target0/lun0:<3>Buffer I/O error on device sda,
logical block 0
unable to read partition table
Attached scsi removable disk sda at scsi0, channel 0, id 0, lun 0
USB Mass Storage device found at 2
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
unable to register OSS mixer device 0:0
Disabled Privacy Extensions on device dfcf7c00(sit0)
Badness in local_bh_enable at kernel/softirq.c:136
[<c0120209>] local_bh_enable+0x89/0x90
[<e0cddf1d>] handle_vpnup+0x9d/0x1e0 [cisco_ipsec]
[<e0cddcbc>] interceptor_ioctl+0x15c/0x160 [cisco_ipsec]
[<c021f5a4>] dev_ifsioc+0x374/0x3e0
[<c021f7cc>] dev_ioctl+0x1bc/0x310
[<c0215170>] sock_ioctl+0x290/0x2c0
[<c0167a7c>] sys_ioctl+0x11c/0x280
[<c010603b>] syscall_call+0x7/0xb
Badness in local_bh_enable at kernel/softirq.c:136
[<c0120209>] local_bh_enable+0x89/0x90
[<c021ceaf>] dev_remove_pack+0xf/0x20
[<e0cddf74>] handle_vpnup+0xf4/0x1e0 [cisco_ipsec]
[<e0cddcbc>] interceptor_ioctl+0x15c/0x160 [cisco_ipsec]
[<c021f5a4>] dev_ifsioc+0x374/0x3e0
[<c021f7cc>] dev_ioctl+0x1bc/0x310
[<c0215170>] sock_ioctl+0x290/0x2c0
[<c0167a7c>] sys_ioctl+0x11c/0x280
[<c010603b>] syscall_call+0x7/0xb
bad: scheduling while atomic!
[<c02801b5>] schedule+0x4c5/0x4d0
[<c0106a20>] common_interrupt+0x18/0x20
[<c011007b>] post_set+0x1b/0x50
[<c0280288>] wait_for_completion+0x78/0xd0
[<c0118b30>] default_wake_function+0x0/0x20
[<c012c63e>] __kernel_text_address+0x2e/0x40
[<c0118b30>] default_wake_function+0x0/0x20
[<c0106d98>] show_trace+0x58/0xa0
[<c012c142>] synchronize_kernel+0x32/0x40
[<c0106e9c>] dump_stack+0x1c/0x20
[<c012c100>] wakeme_after_rcu+0x0/0x10
[<c021ceaf>] dev_remove_pack+0xf/0x20
[<e0cddf74>] handle_vpnup+0xf4/0x1e0 [cisco_ipsec]
[<e0cddcbc>] interceptor_ioctl+0x15c/0x160 [cisco_ipsec]
[<c021f5a4>] dev_ifsioc+0x374/0x3e0
[<c021f7cc>] dev_ioctl+0x1bc/0x310
[<c0215170>] sock_ioctl+0x290/0x2c0
[<c0167a7c>] sys_ioctl+0x11c/0x280
[<c010603b>] syscall_call+0x7/0xb
eth0: no IPv6 routers present
eth1: no IPv6 routers present
ISO 9660 Extensions: Microsoft Joliet Level 1
ISOFS: changing to secondary root
SCSI device sda: 511744 512-byte hdwr sectors (262 MB)
sda: assuming Write Enabled
sda: assuming drive cache: write through
SCSI device sda: 511744 512-byte hdwr sectors (262 MB)
sda: assuming Write Enabled
sda: assuming drive cache: write through
/dev/scsi/host0/bus0/target0/lun0: p1
FAT: invalid media value (0x01)
VFS: Can't find a valid FAT filesystem on dev sda.
Badness in local_bh_enable at kernel/softirq.c:136
[<c0120209>] local_bh_enable+0x89/0x90
[<e0cddf1d>] handle_vpnup+0x9d/0x1e0 [cisco_ipsec]
[<e0cddcbc>] interceptor_ioctl+0x15c/0x160 [cisco_ipsec]
[<c021f5a4>] dev_ifsioc+0x374/0x3e0
[<c021f7cc>] dev_ioctl+0x1bc/0x310
[<c0215170>] sock_ioctl+0x290/0x2c0
[<c0167a7c>] sys_ioctl+0x11c/0x280
[<c010603b>] syscall_call+0x7/0xb
Badness in local_bh_enable at kernel/softirq.c:136
[<c0120209>] local_bh_enable+0x89/0x90
[<c021ceaf>] dev_remove_pack+0xf/0x20
[<e0cddf74>] handle_vpnup+0xf4/0x1e0 [cisco_ipsec]
[<e0cddcbc>] interceptor_ioctl+0x15c/0x160 [cisco_ipsec]
[<c021f5a4>] dev_ifsioc+0x374/0x3e0
[<c021f7cc>] dev_ioctl+0x1bc/0x310
[<c0215170>] sock_ioctl+0x290/0x2c0
[<c0167a7c>] sys_ioctl+0x11c/0x280
[<c010603b>] syscall_call+0x7/0xb
bad: scheduling while atomic!
[<c02801b5>] schedule+0x4c5/0x4d0
[<c0106a20>] common_interrupt+0x18/0x20
[<c011007b>] post_set+0x1b/0x50
[<c0280288>] wait_for_completion+0x78/0xd0
[<c0118b30>] default_wake_function+0x0/0x20
[<c012c63e>] __kernel_text_address+0x2e/0x40
[<c0118b30>] default_wake_function+0x0/0x20
[<c0106d98>] show_trace+0x58/0xa0
[<c012c142>] synchronize_kernel+0x32/0x40
[<c0106e9c>] dump_stack+0x1c/0x20
[<c012c100>] wakeme_after_rcu+0x0/0x10
[<c021ceaf>] dev_remove_pack+0xf/0x20
[<e0cddf74>] handle_vpnup+0xf4/0x1e0 [cisco_ipsec]
[<e0cddcbc>] interceptor_ioctl+0x15c/0x160 [cisco_ipsec]
[<c021f5a4>] dev_ifsioc+0x374/0x3e0
[<c021f7cc>] dev_ioctl+0x1bc/0x310
[<c0215170>] sock_ioctl+0x290/0x2c0
[<c0167a7c>] sys_ioctl+0x11c/0x280
[<c010603b>] syscall_call+0x7/0xb
FAT: invalid media value (0x01)
VFS: Can't find a valid FAT filesystem on dev sda.
FAT: invalid media value (0x01)
VFS: Can't find a valid FAT filesystem on dev sda.
Please can some one tell me what is wrong and how to solve the problem.
thank in advance