[ltp] Trouble with USB-Memory
jcms
linux-thinkpad@linux-thinkpad.org
Fri, 19 Nov 2004 07:07:11 -0500 (GMT-05:00)
I think I have the same proble with one of my USB solid state devices. I corrected it by finding a machine running Windows ( Argh! ) and them verifying the device by choosing:
computer management -> storage -> disk management
* choose the device ( right click ) then chooose
properties -> tools -> error checking
I hope this help.
J.C.
-----Original Message-----
From: Bertrand Njipwo Kouatchet <bertrand@rbg.informatik.tu-darmstadt.de>
Sent: Nov 18, 2004 1:56 PM
To: linux-thinkpad@linux-thinkpad.org
Subject: [ltp] Trouble with USB-Memory
Hello,
ich have some Problem when tring to mount my usb-stick.
For 1 week i use a friends memory.its work well with the command:
mount -t vfat /dev/sda /mnt
I have buy my one usb-memory and i can use it.The mount commando
give following output:
ThinkPad:/home/bertrand/TODO# mount -t vfat /dev/sda /mnt/
mount: wrong fs type, bad option, bad superblock on /dev/sda,
or too many mounted file systems
hier ist the output of the dmesg-commando it seems to be somethink wrong
with the usb-Device:
#################################################################################################
################################################################################################
ThinkPad:/home/bertrand/TODO# dmesg
p2 p3 < p5 p6 >
hdc: MATSHITADVD-RAM UJ-811, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Adding 136008k swap on /dev/hda5. Priority:-1 extents:1
EXT3 FS on hda6, internal journal
Real Time Clock Driver v1.12
hdc: ATAPI 12X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
Capability LSM initialized
input: PC Speaker
Synaptics Touchpad, model: 1
Firmware: 5.9
Sensor: 44
new absolute packet format
Touchpad has extended capability bits
-> multifinger detection
-> palm detection
-> pass-through port
input: SynPS/2 Synaptics TouchPad on isa0060/serio1
serio: Synaptics pass-through port at isa0060/serio1/input0
mice: PS/2 mouse device common for all mice
ts: Compaq touchscreen protocol output
input: PS/2 Generic Mouse on synaptics-pt/serio0
irda_init()
NET: Registered protocol family 23
inserting floppy driver for 2.6.8-1-686
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
parport: PnPBIOS parport detected.
parport0: PC-style at 0x3bc, irq 7 [PCSPP,TRISTATE]
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected an Intel 855PM Chipset.
agpgart: Maximum main memory to use for agp memory: 439M
agpgart: AGP aperture is 256M @ 0xd0000000
cpci_hotplug: CompactPCI Hot Plug Core version: 0.2
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: acpi_pciehprm:\_SB_.PCI0.PCI1 _HPP fail=0x5
pciehp: acpi_pciehprm:\_SB_.PCI0.PCI1 OSHP fails=0x5
pciehp: acpi_pciehprm: Slot sun(1) at s:b:d:f=0x00:02:00:00
pciehp: acpi_pciehprm:\_SB_.PCI0.PCI1 _HPP fail=0x5
pciehp: acpi_pciehprm:\_SB_.PCI0.PCI1 OSHP fails=0x5
pciehp: acpi_pciehprm: Slot sun(2) at s:b:d:f=0x00:02:00:01
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
shpchp: acpi_shpchprm:\_SB_.PCI0.PCI1 _HPP fail=0x5
shpchp: acpi_pciehprm:\_SB_.PCI0.PCI1 OSHP fails=0x5
shpchp: acpi_shpchprm: Slot sun(1) at s:b:d:f=0x00:02:00:00
shpchp: acpi_shpchprm:\_SB_.PCI0.PCI1 _HPP fail=0x5
shpchp: acpi_pciehprm:\_SB_.PCI0.PCI1 OSHP fails=0x5
shpchp: acpi_shpchprm: Slot sun(2) at s:b:d:f=0x00:02:00:01
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
usbcore: registered new driver usbfs
usbcore: registered new driver hub
USB Universal Host Controller Interface driver v2.2
ACPI: PCI interrupt 0000:00:1d.0[A] -> GSI 11 (level, low) -> IRQ 11
uhci_hcd 0000:00:1d.0: Intel Corp. 82801DB (ICH4) USB UHCI #1
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: irq 11, io base 00001800
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI: PCI interrupt 0000:00:1d.1[B] -> GSI 11 (level, low) -> IRQ 11
uhci_hcd 0000:00:1d.1: Intel Corp. 82801DB (ICH4) USB UHCI #2
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: irq 11, io base 00001820
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI interrupt 0000:00:1d.2[C] -> GSI 11 (level, low) -> IRQ 11
uhci_hcd 0000:00:1d.2: Intel Corp. 82801DB (ICH4) USB UHCI #3
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: irq 11, io base 00001840
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI interrupt 0000:00:1d.7[D] -> GSI 11 (level, low) -> IRQ 11
ehci_hcd 0000:00:1d.7: Intel Corp. 82801DB (ICH4) USB2 EHCI Controller
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: irq 11, pci mem e095d000
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 6 ports detected
hw_random: RNG not detected
Intel 810 + AC97 Audio, version 1.01, 03:31:49 Oct 7 2004
ACPI: PCI interrupt 0000:00:1f.5[B] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1f.5 to 64
i810: Intel ICH4 found at IO 0x18c0 and 0x1c00, MEM 0xc0000c00 and
0xc0000800, IRQ 11
i810: Intel ICH4 mmio at 0xe0976c00 and 0xe0978800
i810_audio: Primary codec has ID 0
i810_audio: Audio Controller supports 6 channels.
i810_audio: Defaulting to base 2 channel mode.
i810_audio: Resetting connection 0
i810_audio: Connection 0 with codec id 0
ac97_codec: AC97 Audio codec, id: ADS116 (Unknown)
i810_audio: AC'97 codec 0 supports AMAP, total channels = 2
ACPI: PCI interrupt 0000:00:1f.6[B] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1f.6 to 64
MC'97 1 converters and GPIO not ready (0xff00)
Linux Kernel Card Services
options: [pci] [cardbus] [pm]
ACPI: PCI interrupt 0000:02:00.0[A] -> GSI 11 (level, low) -> IRQ 11
Yenta: CardBus bridge found at 0000:02:00.0 [1014:0552]
Yenta: ISA IRQ mask 0x0438, PCI irq 11
Socket status: 30000086
ieee1394: Initialized config rom entry `ip1394'
ohci1394: $Rev: 1223 $ Ben Collins <bcollins@debian.org>
PCI: Enabling device 0000:02:00.2 (0000 -> 0002)
ACPI: PCI interrupt 0000:02:00.2[C] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:02:00.2 to 64
ohci1394: fw-host0: Set PHY Reg timeout [0xffffffff/0x00004000/100]
ohci1394: fw-host0: Runaway loop while stopping context: ...
ohci1394: fw-host0: Runaway loop while stopping context: ...
ohci1394: fw-host0: Runaway loop while stopping context: ...
ohci1394: fw-host0: Runaway loop while stopping context: ...
ohci1394: fw-host0: OHCI-1394 165.165 (PCI): IRQ=[11]
MMIO=[c0215000-c02157ff] Max Packet=[65536]
ohci1394: fw-host0: Set PHY Reg timeout [0xffffffff/0x00004000/100]
ohci1394: fw-host0: Set PHY Reg timeout [0xffffffff/0x00004000/100]
ohci1394: fw-host0: Set PHY Reg timeout [0xffffffff/0x00004000/100]
ohci1394: fw-host0: Set PHY Reg timeout [0xffffffff/0x00004000/100]
ohci1394: fw-host0: Set PHY Reg timeout [0xffffffff/0x00004000/100]
ohci1394: fw-host0: Set PHY Reg timeout [0xffffffff/0x00004000/100]
ohci1394: fw-host0: Set PHY Reg timeout [0xffffffff/0x00004000/100]
ohci1394: fw-host0: Set PHY Reg timeout [0xffffffff/0x00004000/100]
ohci1394: fw-host0: Set PHY Reg timeout [0xffffffff/0x00004000/100]
ohci1394: fw-host0: Set PHY Reg timeout [0xffffffff/0x00004000/100]
ohci1394: fw-host0: Set PHY Reg timeout [0xffffffff/0x00004000/100]
ohci1394: fw-host0: Set PHY Reg timeout [0xffffffff/0x00004000/100]
ohci1394: fw-host0: Set PHY Reg timeout [0xffffffff/0x00004000/100]
ohci1394: fw-host0: Set PHY Reg timeout [0xffffffff/0x00004000/100]
ohci1394: fw-host0: Set PHY Reg timeout [0xffffffff/0x00004000/100]
ohci1394: fw-host0: Set PHY Reg timeout [0xffffffff/0x00004000/100]
ohci1394: fw-host0: Set PHY Reg timeout [0xffffffff/0x00004000/100]
ohci1394: fw-host0: Set PHY Reg timeout [0xffffffff/0x00004000/100]
ohci1394: fw-host0: Set PHY Reg timeout [0xffffffff/0x00004000/100]
ohci1394: fw-host0: Set PHY Reg timeout [0xffffffff/0x00004000/100]
ohci1394: fw-host0: Set PHY Reg timeout [0xffffffff/0x00004000/100]
ohci1394: fw-host0: Set PHY Reg timeout [0xffffffff/0x00004000/100]
ohci1394: fw-host0: Set PHY Reg timeout [0xffffffff/0x00004000/100]
ohci1394: fw-host0: Set PHY Reg timeout [0xffffffff/0x00004000/100]
ohci1394: fw-host0: Set PHY Reg timeout [0xffffffff/0x00004000/100]
ohci1394: fw-host0: Set PHY Reg timeout [0xffffffff/0x00004000/100]
ohci1394: fw-host0: Set PHY Reg timeout [0xffffffff/0x00004000/100]
ohci1394: fw-host0: Set PHY Reg timeout [0xffffffff/0x00004000/100]
ohci1394: fw-host0: Set PHY Reg timeout [0xffffffff/0x00004000/100]
ohci1394: fw-host0: Set PHY Reg timeout [0xffffffff/0x00004000/100]
ohci1394: fw-host0: Serial EEPROM has suspicious values, attempting to
setting max_packet_size to 512 bytes
e1000: Ignoring new-style parameters in presence of obsolete ones
Intel(R) PRO/1000 Network Driver - version 5.2.52-k4
Copyright (c) 1999-2004 Intel Corporation.
ACPI: PCI interrupt 0000:02:01.0[A] -> GSI 11 (level, low) -> IRQ 11
e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
ohci1394: fw-host0: Set PHY Reg timeout [0xffffffff/0x00004000/100]
ieee80211_crypt: registered algorithm 'NULL'
ipw2100: Intel(R) PRO/Wireless 2100 Network Driver, 0.60
ipw2100: Copyright(c) 2003-2004 Intel Corporation
ACPI: PCI interrupt 0000:02:02.0[A] -> GSI 11 (level, low) -> IRQ 11
ipw2100: Detected Intel PRO/Wireless 2100 Network Connection
NET: Registered protocol family 17
cs: IO port probe 0x0100-0x04ff: clean.
cs: IO port probe 0x0800-0x08ff: clean.
cs: IO port probe 0x0c00-0x0cff: clean.
cs: IO port probe 0x0a00-0x0aff: clean.
NET: Registered protocol family 10
Disabled Privacy Extensions on device c02fbd80(lo)
IPv6 over IPv4 tunneling driver
cisco_ipsec: module license 'Proprietary' taints kernel.
Cisco Systems VPN Client Version 4.0.5 (Rel) kernel module loaded
IBM machine detected. Enabling interrupts during APM calls.
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: overridden by ACPI.
[drm] Initialized radeon 1.11.0 20020828 on minor 0: ATI Technologies Inc
Radeon R250 Lf [Radeon Mobility 9000 M9]
agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode
agpgart: Putting AGP V2 device at 0000:01:00.0 into 1x mode
[drm] Loading R200 Microcode
eth0: no IPv6 routers present
usb 4-3: new high speed USB device using address 2
Initializing USB Mass Storage driver...
scsi0 : SCSI emulation for USB Mass Storage devices
Vendor: USB Model: BAR Rev: 2.00
Type: Direct-Access ANSI SCSI revision: 02
sda: Unit Not Ready, sense:
Current : sense key Unit Attention
Additional sense: Not ready to ready change, medium may have changed
sda : READ CAPACITY failed.
sda : status=1, message=00, host=0, driver=08
Current sd: sense key Unit Attention
Additional sense: Not ready to ready change, medium may have changed
sda: assuming Write Enabled
sda: assuming drive cache: write through
sda: Unit Not Ready, sense:
Current : sense key Unit Attention
Additional sense: Not ready to ready change, medium may have changed
sda : READ CAPACITY failed.
sda : status=1, message=00, host=0, driver=08
Current sd: sense key Unit Attention
Additional sense: Not ready to ready change, medium may have changed
sda: assuming Write Enabled
sda: assuming drive cache: write through
sda: Unit Not Ready, sense:
Current : sense key Unit Attention
Additional sense: Not ready to ready change, medium may have changed
sda : READ CAPACITY failed.
sda : status=1, message=00, host=0, driver=08
Current sd: sense key Unit Attention
Additional sense: Not ready to ready change, medium may have changed
sda: assuming Write Enabled
sda: assuming drive cache: write through
/dev/scsi/host0/bus0/target0/lun0:end_request: I/O error, dev sda, sector
0
Buffer I/O error on device sda, logical block 0
Buffer I/O error on device sda, logical block 0
unable to read partition table
/dev/scsi/host0/bus0/target0/lun0:<3>Buffer I/O error on device sda,
logical block 0
unable to read partition table
Attached scsi removable disk sda at scsi0, channel 0, id 0, lun 0
USB Mass Storage device found at 2
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
unable to register OSS mixer device 0:0
Disabled Privacy Extensions on device dfcf7c00(sit0)
Badness in local_bh_enable at kernel/softirq.c:136
[<c0120209>] local_bh_enable+0x89/0x90
[<e0cddf1d>] handle_vpnup+0x9d/0x1e0 [cisco_ipsec]
[<e0cddcbc>] interceptor_ioctl+0x15c/0x160 [cisco_ipsec]
[<c021f5a4>] dev_ifsioc+0x374/0x3e0
[<c021f7cc>] dev_ioctl+0x1bc/0x310
[<c0215170>] sock_ioctl+0x290/0x2c0
[<c0167a7c>] sys_ioctl+0x11c/0x280
[<c010603b>] syscall_call+0x7/0xb
Badness in local_bh_enable at kernel/softirq.c:136
[<c0120209>] local_bh_enable+0x89/0x90
[<c021ceaf>] dev_remove_pack+0xf/0x20
[<e0cddf74>] handle_vpnup+0xf4/0x1e0 [cisco_ipsec]
[<e0cddcbc>] interceptor_ioctl+0x15c/0x160 [cisco_ipsec]
[<c021f5a4>] dev_ifsioc+0x374/0x3e0
[<c021f7cc>] dev_ioctl+0x1bc/0x310
[<c0215170>] sock_ioctl+0x290/0x2c0
[<c0167a7c>] sys_ioctl+0x11c/0x280
[<c010603b>] syscall_call+0x7/0xb
bad: scheduling while atomic!
[<c02801b5>] schedule+0x4c5/0x4d0
[<c0106a20>] common_interrupt+0x18/0x20
[<c011007b>] post_set+0x1b/0x50
[<c0280288>] wait_for_completion+0x78/0xd0
[<c0118b30>] default_wake_function+0x0/0x20
[<c012c63e>] __kernel_text_address+0x2e/0x40
[<c0118b30>] default_wake_function+0x0/0x20
[<c0106d98>] show_trace+0x58/0xa0
[<c012c142>] synchronize_kernel+0x32/0x40
[<c0106e9c>] dump_stack+0x1c/0x20
[<c012c100>] wakeme_after_rcu+0x0/0x10
[<c021ceaf>] dev_remove_pack+0xf/0x20
[<e0cddf74>] handle_vpnup+0xf4/0x1e0 [cisco_ipsec]
[<e0cddcbc>] interceptor_ioctl+0x15c/0x160 [cisco_ipsec]
[<c021f5a4>] dev_ifsioc+0x374/0x3e0
[<c021f7cc>] dev_ioctl+0x1bc/0x310
[<c0215170>] sock_ioctl+0x290/0x2c0
[<c0167a7c>] sys_ioctl+0x11c/0x280
[<c010603b>] syscall_call+0x7/0xb
eth0: no IPv6 routers present
eth1: no IPv6 routers present
ISO 9660 Extensions: Microsoft Joliet Level 1
ISOFS: changing to secondary root
SCSI device sda: 511744 512-byte hdwr sectors (262 MB)
ThinkPad:/home/bertrand/TODO# dmesg
p2 p3 < p5 p6 >
hdc: MATSHITADVD-RAM UJ-811, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Adding 136008k swap on /dev/hda5. Priority:-1 extents:1
EXT3 FS on hda6, internal journal
Real Time Clock Driver v1.12
hdc: ATAPI 12X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
Capability LSM initialized
input: PC Speaker
Synaptics Touchpad, model: 1
Firmware: 5.9
Sensor: 44
new absolute packet format
Touchpad has extended capability bits
-> multifinger detection
-> palm detection
-> pass-through port
input: SynPS/2 Synaptics TouchPad on isa0060/serio1
serio: Synaptics pass-through port at isa0060/serio1/input0
mice: PS/2 mouse device common for all mice
ts: Compaq touchscreen protocol output
input: PS/2 Generic Mouse on synaptics-pt/serio0
irda_init()
NET: Registered protocol family 23
inserting floppy driver for 2.6.8-1-686
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
parport: PnPBIOS parport detected.
parport0: PC-style at 0x3bc, irq 7 [PCSPP,TRISTATE]
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected an Intel 855PM Chipset.
agpgart: Maximum main memory to use for agp memory: 439M
agpgart: AGP aperture is 256M @ 0xd0000000
cpci_hotplug: CompactPCI Hot Plug Core version: 0.2
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: acpi_pciehprm:\_SB_.PCI0.PCI1 _HPP fail=0x5
pciehp: acpi_pciehprm:\_SB_.PCI0.PCI1 OSHP fails=0x5
pciehp: acpi_pciehprm: Slot sun(1) at s:b:d:f=0x00:02:00:00
pciehp: acpi_pciehprm:\_SB_.PCI0.PCI1 _HPP fail=0x5
pciehp: acpi_pciehprm:\_SB_.PCI0.PCI1 OSHP fails=0x5
pciehp: acpi_pciehprm: Slot sun(2) at s:b:d:f=0x00:02:00:01
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
shpchp: acpi_shpchprm:\_SB_.PCI0.PCI1 _HPP fail=0x5
shpchp: acpi_pciehprm:\_SB_.PCI0.PCI1 OSHP fails=0x5
shpchp: acpi_shpchprm: Slot sun(1) at s:b:d:f=0x00:02:00:00
shpchp: acpi_shpchprm:\_SB_.PCI0.PCI1 _HPP fail=0x5
shpchp: acpi_pciehprm:\_SB_.PCI0.PCI1 OSHP fails=0x5
shpchp: acpi_shpchprm: Slot sun(2) at s:b:d:f=0x00:02:00:01
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
usbcore: registered new driver usbfs
usbcore: registered new driver hub
USB Universal Host Controller Interface driver v2.2
ACPI: PCI interrupt 0000:00:1d.0[A] -> GSI 11 (level, low) -> IRQ 11
uhci_hcd 0000:00:1d.0: Intel Corp. 82801DB (ICH4) USB UHCI #1
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: irq 11, io base 00001800
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI: PCI interrupt 0000:00:1d.1[B] -> GSI 11 (level, low) -> IRQ 11
uhci_hcd 0000:00:1d.1: Intel Corp. 82801DB (ICH4) USB UHCI #2
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: irq 11, io base 00001820
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI interrupt 0000:00:1d.2[C] -> GSI 11 (level, low) -> IRQ 11
uhci_hcd 0000:00:1d.2: Intel Corp. 82801DB (ICH4) USB UHCI #3
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: irq 11, io base 00001840
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI interrupt 0000:00:1d.7[D] -> GSI 11 (level, low) -> IRQ 11
ehci_hcd 0000:00:1d.7: Intel Corp. 82801DB (ICH4) USB2 EHCI Controller
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: irq 11, pci mem e095d000
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 6 ports detected
hw_random: RNG not detected
Intel 810 + AC97 Audio, version 1.01, 03:31:49 Oct 7 2004
ACPI: PCI interrupt 0000:00:1f.5[B] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1f.5 to 64
i810: Intel ICH4 found at IO 0x18c0 and 0x1c00, MEM 0xc0000c00 and
0xc0000800, IRQ 11
i810: Intel ICH4 mmio at 0xe0976c00 and 0xe0978800
i810_audio: Primary codec has ID 0
i810_audio: Audio Controller supports 6 channels.
i810_audio: Defaulting to base 2 channel mode.
i810_audio: Resetting connection 0
i810_audio: Connection 0 with codec id 0
ac97_codec: AC97 Audio codec, id: ADS116 (Unknown)
i810_audio: AC'97 codec 0 supports AMAP, total channels = 2
ACPI: PCI interrupt 0000:00:1f.6[B] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1f.6 to 64
MC'97 1 converters and GPIO not ready (0xff00)
Linux Kernel Card Services
options: [pci] [cardbus] [pm]
ACPI: PCI interrupt 0000:02:00.0[A] -> GSI 11 (level, low) -> IRQ 11
Yenta: CardBus bridge found at 0000:02:00.0 [1014:0552]
Yenta: ISA IRQ mask 0x0438, PCI irq 11
Socket status: 30000086
ieee1394: Initialized config rom entry `ip1394'
ohci1394: $Rev: 1223 $ Ben Collins <bcollins@debian.org>
PCI: Enabling device 0000:02:00.2 (0000 -> 0002)
ACPI: PCI interrupt 0000:02:00.2[C] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:02:00.2 to 64
ohci1394: fw-host0: Set PHY Reg timeout [0xffffffff/0x00004000/100]
ohci1394: fw-host0: Runaway loop while stopping context: ...
ohci1394: fw-host0: Runaway loop while stopping context: ...
ohci1394: fw-host0: Runaway loop while stopping context: ...
ohci1394: fw-host0: Runaway loop while stopping context: ...
ohci1394: fw-host0: OHCI-1394 165.165 (PCI): IRQ=[11]
MMIO=[c0215000-c02157ff] Max Packet=[65536]
ohci1394: fw-host0: Set PHY Reg timeout [0xffffffff/0x00004000/100]
ohci1394: fw-host0: Set PHY Reg timeout [0xffffffff/0x00004000/100]
ohci1394: fw-host0: Set PHY Reg timeout [0xffffffff/0x00004000/100]
ohci1394: fw-host0: Set PHY Reg timeout [0xffffffff/0x00004000/100]
ohci1394: fw-host0: Set PHY Reg timeout [0xffffffff/0x00004000/100]
ohci1394: fw-host0: Set PHY Reg timeout [0xffffffff/0x00004000/100]
ohci1394: fw-host0: Set PHY Reg timeout [0xffffffff/0x00004000/100]
ohci1394: fw-host0: Set PHY Reg timeout [0xffffffff/0x00004000/100]
ohci1394: fw-host0: Set PHY Reg timeout [0xffffffff/0x00004000/100]
ohci1394: fw-host0: Set PHY Reg timeout [0xffffffff/0x00004000/100]
ohci1394: fw-host0: Set PHY Reg timeout [0xffffffff/0x00004000/100]
ohci1394: fw-host0: Set PHY Reg timeout [0xffffffff/0x00004000/100]
ohci1394: fw-host0: Set PHY Reg timeout [0xffffffff/0x00004000/100]
ohci1394: fw-host0: Set PHY Reg timeout [0xffffffff/0x00004000/100]
ohci1394: fw-host0: Set PHY Reg timeout [0xffffffff/0x00004000/100]
ohci1394: fw-host0: Set PHY Reg timeout [0xffffffff/0x00004000/100]
ohci1394: fw-host0: Set PHY Reg timeout [0xffffffff/0x00004000/100]
ohci1394: fw-host0: Set PHY Reg timeout [0xffffffff/0x00004000/100]
ohci1394: fw-host0: Set PHY Reg timeout [0xffffffff/0x00004000/100]
ohci1394: fw-host0: Set PHY Reg timeout [0xffffffff/0x00004000/100]
ohci1394: fw-host0: Set PHY Reg timeout [0xffffffff/0x00004000/100]
ohci1394: fw-host0: Set PHY Reg timeout [0xffffffff/0x00004000/100]
ohci1394: fw-host0: Set PHY Reg timeout [0xffffffff/0x00004000/100]
ohci1394: fw-host0: Set PHY Reg timeout [0xffffffff/0x00004000/100]
ohci1394: fw-host0: Set PHY Reg timeout [0xffffffff/0x00004000/100]
ohci1394: fw-host0: Set PHY Reg timeout [0xffffffff/0x00004000/100]
ohci1394: fw-host0: Set PHY Reg timeout [0xffffffff/0x00004000/100]
ohci1394: fw-host0: Set PHY Reg timeout [0xffffffff/0x00004000/100]
ohci1394: fw-host0: Set PHY Reg timeout [0xffffffff/0x00004000/100]
ohci1394: fw-host0: Set PHY Reg timeout [0xffffffff/0x00004000/100]
ohci1394: fw-host0: Serial EEPROM has suspicious values, attempting to
setting max_packet_size to 512 bytes
e1000: Ignoring new-style parameters in presence of obsolete ones
Intel(R) PRO/1000 Network Driver - version 5.2.52-k4
Copyright (c) 1999-2004 Intel Corporation.
ACPI: PCI interrupt 0000:02:01.0[A] -> GSI 11 (level, low) -> IRQ 11
e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
ohci1394: fw-host0: Set PHY Reg timeout [0xffffffff/0x00004000/100]
ieee80211_crypt: registered algorithm 'NULL'
ipw2100: Intel(R) PRO/Wireless 2100 Network Driver, 0.60
ipw2100: Copyright(c) 2003-2004 Intel Corporation
ACPI: PCI interrupt 0000:02:02.0[A] -> GSI 11 (level, low) -> IRQ 11
ipw2100: Detected Intel PRO/Wireless 2100 Network Connection
NET: Registered protocol family 17
cs: IO port probe 0x0100-0x04ff: clean.
cs: IO port probe 0x0800-0x08ff: clean.
cs: IO port probe 0x0c00-0x0cff: clean.
cs: IO port probe 0x0a00-0x0aff: clean.
NET: Registered protocol family 10
Disabled Privacy Extensions on device c02fbd80(lo)
IPv6 over IPv4 tunneling driver
cisco_ipsec: module license 'Proprietary' taints kernel.
Cisco Systems VPN Client Version 4.0.5 (Rel) kernel module loaded
IBM machine detected. Enabling interrupts during APM calls.
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: overridden by ACPI.
[drm] Initialized radeon 1.11.0 20020828 on minor 0: ATI Technologies Inc
Radeon R250 Lf [Radeon Mobility 9000 M9]
agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode
agpgart: Putting AGP V2 device at 0000:01:00.0 into 1x mode
[drm] Loading R200 Microcode
eth0: no IPv6 routers present
usb 4-3: new high speed USB device using address 2
Initializing USB Mass Storage driver...
scsi0 : SCSI emulation for USB Mass Storage devices
Vendor: USB Model: BAR Rev: 2.00
Type: Direct-Access ANSI SCSI revision: 02
sda: Unit Not Ready, sense:
Current : sense key Unit Attention
Additional sense: Not ready to ready change, medium may have changed
sda : READ CAPACITY failed.
sda : status=1, message=00, host=0, driver=08
Current sd: sense key Unit Attention
Additional sense: Not ready to ready change, medium may have changed
sda: assuming Write Enabled
sda: assuming drive cache: write through
sda: Unit Not Ready, sense:
Current : sense key Unit Attention
Additional sense: Not ready to ready change, medium may have changed
sda : READ CAPACITY failed.
sda : status=1, message=00, host=0, driver=08
Current sd: sense key Unit Attention
Additional sense: Not ready to ready change, medium may have changed
sda: assuming Write Enabled
sda: assuming drive cache: write through
sda: Unit Not Ready, sense:
Current : sense key Unit Attention
Additional sense: Not ready to ready change, medium may have changed
sda : READ CAPACITY failed.
sda : status=1, message=00, host=0, driver=08
Current sd: sense key Unit Attention
Additional sense: Not ready to ready change, medium may have changed
sda: assuming Write Enabled
sda: assuming drive cache: write through
/dev/scsi/host0/bus0/target0/lun0:end_request: I/O error, dev sda, sector
0
Buffer I/O error on device sda, logical block 0
Buffer I/O error on device sda, logical block 0
unable to read partition table
/dev/scsi/host0/bus0/target0/lun0:<3>Buffer I/O error on device sda,
logical block 0
unable to read partition table
Attached scsi removable disk sda at scsi0, channel 0, id 0, lun 0
USB Mass Storage device found at 2
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
unable to register OSS mixer device 0:0
Disabled Privacy Extensions on device dfcf7c00(sit0)
Badness in local_bh_enable at kernel/softirq.c:136
[<c0120209>] local_bh_enable+0x89/0x90
[<e0cddf1d>] handle_vpnup+0x9d/0x1e0 [cisco_ipsec]
[<e0cddcbc>] interceptor_ioctl+0x15c/0x160 [cisco_ipsec]
[<c021f5a4>] dev_ifsioc+0x374/0x3e0
[<c021f7cc>] dev_ioctl+0x1bc/0x310
[<c0215170>] sock_ioctl+0x290/0x2c0
[<c0167a7c>] sys_ioctl+0x11c/0x280
[<c010603b>] syscall_call+0x7/0xb
Badness in local_bh_enable at kernel/softirq.c:136
[<c0120209>] local_bh_enable+0x89/0x90
[<c021ceaf>] dev_remove_pack+0xf/0x20
[<e0cddf74>] handle_vpnup+0xf4/0x1e0 [cisco_ipsec]
[<e0cddcbc>] interceptor_ioctl+0x15c/0x160 [cisco_ipsec]
[<c021f5a4>] dev_ifsioc+0x374/0x3e0
[<c021f7cc>] dev_ioctl+0x1bc/0x310
[<c0215170>] sock_ioctl+0x290/0x2c0
[<c0167a7c>] sys_ioctl+0x11c/0x280
[<c010603b>] syscall_call+0x7/0xb
bad: scheduling while atomic!
[<c02801b5>] schedule+0x4c5/0x4d0
[<c0106a20>] common_interrupt+0x18/0x20
[<c011007b>] post_set+0x1b/0x50
[<c0280288>] wait_for_completion+0x78/0xd0
[<c0118b30>] default_wake_function+0x0/0x20
[<c012c63e>] __kernel_text_address+0x2e/0x40
[<c0118b30>] default_wake_function+0x0/0x20
[<c0106d98>] show_trace+0x58/0xa0
[<c012c142>] synchronize_kernel+0x32/0x40
[<c0106e9c>] dump_stack+0x1c/0x20
[<c012c100>] wakeme_after_rcu+0x0/0x10
[<c021ceaf>] dev_remove_pack+0xf/0x20
[<e0cddf74>] handle_vpnup+0xf4/0x1e0 [cisco_ipsec]
[<e0cddcbc>] interceptor_ioctl+0x15c/0x160 [cisco_ipsec]
[<c021f5a4>] dev_ifsioc+0x374/0x3e0
[<c021f7cc>] dev_ioctl+0x1bc/0x310
[<c0215170>] sock_ioctl+0x290/0x2c0
[<c0167a7c>] sys_ioctl+0x11c/0x280
[<c010603b>] syscall_call+0x7/0xb
eth0: no IPv6 routers present
eth1: no IPv6 routers present
ISO 9660 Extensions: Microsoft Joliet Level 1
ISOFS: changing to secondary root
SCSI device sda: 511744 512-byte hdwr sectors (262 MB)
sda: assuming Write Enabled
sda: assuming drive cache: write through
SCSI device sda: 511744 512-byte hdwr sectors (262 MB)
sda: assuming Write Enabled
sda: assuming drive cache: write through
/dev/scsi/host0/bus0/target0/lun0: p1
FAT: invalid media value (0x01)
VFS: Can't find a valid FAT filesystem on dev sda.
Badness in local_bh_enable at kernel/softirq.c:136
[<c0120209>] local_bh_enable+0x89/0x90
[<e0cddf1d>] handle_vpnup+0x9d/0x1e0 [cisco_ipsec]
[<e0cddcbc>] interceptor_ioctl+0x15c/0x160 [cisco_ipsec]
[<c021f5a4>] dev_ifsioc+0x374/0x3e0
[<c021f7cc>] dev_ioctl+0x1bc/0x310
[<c0215170>] sock_ioctl+0x290/0x2c0
[<c0167a7c>] sys_ioctl+0x11c/0x280
[<c010603b>] syscall_call+0x7/0xb
Badness in local_bh_enable at kernel/softirq.c:136
[<c0120209>] local_bh_enable+0x89/0x90
[<c021ceaf>] dev_remove_pack+0xf/0x20
[<e0cddf74>] handle_vpnup+0xf4/0x1e0 [cisco_ipsec]
[<e0cddcbc>] interceptor_ioctl+0x15c/0x160 [cisco_ipsec]
[<c021f5a4>] dev_ifsioc+0x374/0x3e0
[<c021f7cc>] dev_ioctl+0x1bc/0x310
[<c0215170>] sock_ioctl+0x290/0x2c0
[<c0167a7c>] sys_ioctl+0x11c/0x280
[<c010603b>] syscall_call+0x7/0xb
bad: scheduling while atomic!
[<c02801b5>] schedule+0x4c5/0x4d0
[<c0106a20>] common_interrupt+0x18/0x20
[<c011007b>] post_set+0x1b/0x50
[<c0280288>] wait_for_completion+0x78/0xd0
[<c0118b30>] default_wake_function+0x0/0x20
[<c012c63e>] __kernel_text_address+0x2e/0x40
[<c0118b30>] default_wake_function+0x0/0x20
[<c0106d98>] show_trace+0x58/0xa0
[<c012c142>] synchronize_kernel+0x32/0x40
[<c0106e9c>] dump_stack+0x1c/0x20
[<c012c100>] wakeme_after_rcu+0x0/0x10
[<c021ceaf>] dev_remove_pack+0xf/0x20
[<e0cddf74>] handle_vpnup+0xf4/0x1e0 [cisco_ipsec]
[<e0cddcbc>] interceptor_ioctl+0x15c/0x160 [cisco_ipsec]
[<c021f5a4>] dev_ifsioc+0x374/0x3e0
[<c021f7cc>] dev_ioctl+0x1bc/0x310
[<c0215170>] sock_ioctl+0x290/0x2c0
[<c0167a7c>] sys_ioctl+0x11c/0x280
[<c010603b>] syscall_call+0x7/0xb
FAT: invalid media value (0x01)
VFS: Can't find a valid FAT filesystem on dev sda.
FAT: invalid media value (0x01)
VFS: Can't find a valid FAT filesystem on dev sda.
Please can some one tell me what is wrong and how to solve the problem.
thank in advance
--
The linux-thinkpad mailing list home page is at:
http://mailman.linux-thinkpad.org/mailman/listinfo/linux-thinkpad