[ltp] Re: Linux-Thinkpad digest, Vol 1 #647 - 25 msgs

[Chris]

On Thu, 14 Oct 2004 20:01, linux-thinkpad-request@linux-thinkpad.org wrote:
check your .config to see if it is enabled.

cat .config|grep CONFIG_X86_UP_APIC
make sure it says no




> hi,
>
> where to disable this option? under which sektion in kernel?
> in the kernel or can i edit just a conf file?
>
> thanks
>
> markus
>
> Am Mittwoch, den 13.10.2004, 20:27 +1000 schrieb Chris:
> > On Wed, 13 Oct 2004 20:01, linux-thinkpad-request@linux-thinkpad.org
> > wrot=3D
>
> e:
> >=3D20
> > I think your problem is caused by one of the settings in the kernel
> > which=3D
>
> =C2=A0i=3D20
>
> > happened to come cross and was pointed out by other people from this
> > mail=3D
>
> =3D20
>
> > list.=3D20
> >=3D20
> > =3DA8
> > =C2=A0Just disbling this feature:
> > =C2=A0# CONFIG_X86_UP_APIC is not set
> > =3DA8
> >=3D20
> > it might fix up your problem
> >=3D20
> >
> > > Hi list,
> > >
> > > i have bought me a ibm r51 laptop. have installed mandrake 10.1 with
> > > kernel 2.6.8.1-10. all works fine, cpu throteling, wlan, swsusp, ...
> > >
> > > but i have one problem with my acpi settings i think. when i shutdown,
> > > softwaresuspend, go sleep mode, the laptop ventilator is still running
> > > and i think the motherboard get also power because the wlan led is
> > > blinking. i must then press the power on button about 6 sek. to power
> > > the laptop really off.
> > >
> > > in /etc/lilo.conf i have acpi=3D3Don.
> > >
> > > does someone had the same problem?
> > >
> > > greetings from the lake conctance (germany)
> > >
> > > markus