[ltp] Re: [ANN] tp_smapi - a new Linux SMAPI driver

[Michael Stilkerich]

Hi,

does not work on my T40p (2373-G3G) either, dmesg output as follows:
tp_smapi: initialized, smapi_port=0xb2.
tp_smapi: driver successfully loaded.
tp_smapi: smapi_request in: BX=211a CX=100 DI=0 SI=0
tp_smapi: smapi_request out: AX=8680 BX=211a CX=100 DX=b2 DI=0 SI=0 ret=-38
tp_smapi: SMAPI error: Function is not supported (BX=211a)
tp_smapi: get_thresh(0,0) failed
tp_smapi: smapi_request in: BX=2116 CX=100 DI=0 SI=0
tp_smapi: smapi_request out: AX=8680 BX=2116 CX=100 DX=b2 DI=0 SI=0 ret=-38
tp_smapi: SMAPI error: Function is not supported (BX=2116)
tp_smapi: get_thresh(0,1) failed
tp_smapi: smapi_request in: BX=2116 CX=100 DI=0 SI=0
tp_smapi: smapi_request out: AX=8680 BX=2116 CX=100 DX=b2 DI=0 SI=0 ret=-38
tp_smapi: SMAPI error: Function is not supported (BX=2116)
tp_smapi: get_thresh(0,1) failed
tp_smapi: smapi_request in: BX=2116 CX=100 DI=0 SI=0
tp_smapi: smapi_request out: AX=8680 BX=2116 CX=100 DX=b2 DI=0 SI=0 ret=-38
tp_smapi: SMAPI error: Function is not supported (BX=2116)
tp_smapi: get_thresh(0,1) failed
tp_smapi: smapi_request in: BX=211a CX=100 DI=0 SI=0
tp_smapi: smapi_request out: AX=8680 BX=211a CX=100 DX=b2 DI=0 SI=0 ret=-38
tp_smapi: SMAPI error: Function is not supported (BX=211a)
tp_smapi: get_thresh(0,0) failed
tp_smapi: smapi_request in: BX=2116 CX=100 DI=0 SI=0
tp_smapi: smapi_request out: AX=8680 BX=2116 CX=100 DX=b2 DI=0 SI=0 ret=-38
tp_smapi: SMAPI error: Function is not supported (BX=2116)
tp_smapi: get_thresh(0,1) failed
tp_smapi: smapi_request in: BX=211a CX=100 DI=0 SI=0
tp_smapi: smapi_request out: AX=8680 BX=211a CX=100 DX=b2 DI=0 SI=0 ret=-38
tp_smapi: SMAPI error: Function is not supported (BX=211a)
tp_smapi: get_thresh(0,0) failed

-Mike