[ltp] unstable after undervolting

[Paul RIVIER]

Marcus Hagn wrote:

>Prime95 is a good program to test the stability. Let it run at least
>24 hours and see if it finds any stability problems. I had cases where
>a stability problem was detected after 20 hours of stable activities.
>If you have found a stable point increase the voltage by one
>additional step to account for any temperature effects, and than you
>system should be stable.
>
>Regards
>Marcus
>
>  
>
exactly what I would recommand as well. Setting the really bottom can be 
stable for 95% of the time, but can crash because of temperature efects, 
or sudent scaling. So bottom stable + 16 is IMHO the best choice.
My settings : T42 / Dothan 1.7 Ghz : 716 mv for 600 Mhz

paul