[ltp] PATCH: radeon LCD plus DVI support

[Alex Deucher]

On Tue, 22 Feb 2005 00:32:14 -0600, Joe LaPenna <joelapenna@gmail.com> wrote:
> Tried with mergedfb suggestion and xinerama suggestion, no go. merged
> fb gets further, with again, the lit display on laptop and X on the
> external, log of it is at:
> 
> http://joelapenna.com/logs/Xorg.0.log.mergedfb

How about without the monitorlayout option?  can you post that log as
well?  Also was this test with the updated patch I mentioned
yesterday, or the original from Sunday?

Thanks,

Alex

> 
> 
> On Mon, 21 Feb 2005 23:52:48 -0500, Alex Deucher <alexdeucher@gmail.com> wrote:
> > On Mon, 21 Feb 2005 20:31:18 -0600, Joe LaPenna <joelapenna@gmail.com> wrote:
> > > Could you get a copy of your xorg.conf somewhere? I am pretty retarded
> > > when it comes to setting up dual head on any video card in X.
> > >
> >
> > something like this should do:
> > update the modes and metamodes to what your monitor and LCDs need,
> > mergedfb:
> > http://www.botchco.com/alex/xorg/xorg.conf
> >
> > here's a sample xinerama config.  change the driver name from savage
> > to radeon and add the monitorlayout option to the first device
> > section.
> > http://www.botchco.com/alex/new-savage/savage/working/XF86Config-xinerama
> >
> > hope that helps,
> >
> > Alex
> >
> > >
> > > On Sun, 20 Feb 2005 13:13:37 +0100, Matthias Himber <mhimber@gmx.net> wrote:
> > > > > Let me know how it goes.  I don't have the hardware to test myself.
> > > >
> > > > It works... I think. My external Monitor (a Hyunday ImageQuest Q17 Flatpanel)
> > > > is extremely picky when it comes to video modes, and I never could get X to
> > > > calculate working modelines for it. I managed to get it working with the
> > > > "MonitorLayout" "TMDS, NONE" hack mentioned previously on this list, but only
> > > > after I added the standard VESA modelines into my xorg.conf and forced X to
> > > > use them through the "IgnoreEDID" option. There seems to be no way to force
> > > > the radeon driver to use an exact modeline specified for the second monitor,
> > > > at least I haven't found one in about two hours of trying and searching
> > > > through the manpages. I found that the only modes I can get to work on the
> > > > external display as well are 640x480 an 1400x1050 (which the Q17 doesn't even
> > > > support!). Also, trying to turn off DDC altogether and creating all modes
> > > > manually failed because the internal panels modes are not obtained through
> > > > DDC, but through the BIOS, and I found no way to disable that.
> > > > However, thanks for the patch! It's a start at the very least, and I had
> > > > already given up all hope of ever getting useful DVI output out of the
> > > > Thinkpad.
> > > > Regards,
> > > >         Matthias
> > > >
> > > >
> > > >
> > >
> > > --
> > > -Joe
> > > http://joelapenna.com
> > > --
> > > The linux-thinkpad mailing list home page is at:
> > > http://mailman.linux-thinkpad.org/mailman/listinfo/linux-thinkpad
> > >
> > --
> > The linux-thinkpad mailing list home page is at:
> > http://mailman.linux-thinkpad.org/mailman/listinfo/linux-thinkpad
> >
> 
> --
> -Joe
> http://joelapenna.com
> --
> The linux-thinkpad mailing list home page is at:
> http://mailman.linux-thinkpad.org/mailman/listinfo/linux-thinkpad
>